SPECIAL REPAIR OF SINGLE MEN BK BLDG NO E-07 AT SEHJRA BTY LOC, ARTY CENTRE UNDER GE GOLCONDA

Dismantling of AC sheets / Galvalume sheet / GI Sheet of corrugated or semi corrugated etc. sheets in roof coverings and remove all the debris from site and rubbish off the premises complete all as specified and as directed.

Dismantling timber scantlings 40 Sq cm and over in section in any position, unframed work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F MS Angle sections as in main truss and cross beams, hip and jack rafters; purlins where connected to common rafters and drilling holes for existing wooden/steel angle rafter; fixed with angle cleats MS Screw bolts necessary welding to purlins or other connecting plate of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Dismantling of boarding, any description fixed in any position with nails complete all as specified and directed.

Providing and fixing false ceiling 12mm thick false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as per IS8225:1987, Non-combustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanized @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspend from ceiling using galvanized mild steel items ( galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25 x 2mm galvanized iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm centre to centre and 50mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and remove all the debris from site and rubbish off the premises , complete all as specified and as directed.