Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC RZ 55 1ST FLOOR MOHAN NAGAR PANKHA ROAD NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹19.1 L+₹2.4 L (14.2%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹20.1 L+₹3.4 L (20.1%)Rejected-Finance RZ H 5 NANDA BLOCK MAHAVIR ENCLAVE PART 1 PAL AM SOUTH WEST DELHI DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹20.9 L+₹4.2 L (24.9%)Rejected-Finance | L4 | Rejected-Finance Rejected |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
26 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Subroto Park
GE (AF) Subroto Park c o 56 APO
PERIODICAL SERVICES TO SMQ MD ACCN /AIR MEN BILLETS/ SNCOS MESS UNDER AGE B/R-I OF GE(AF) SUBROTO PARK
2022_MES_572376_1
GE/SP/ TOKEN-79/2022-23
Open Tender
Civil Works
Item Rate
180 days
Subroto Park Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE (AF) Subroto Park
₹60,000
Yes
12 Apr 2023
31 Dec 2022
2 Feb 2023
31 Dec 2022
26 Jan 2023
14 Jan 2023
Amount
Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side of MOD land complete all as specified and as directed.
M&L for 12 mm thick cement mortar 1:6, on uneven surface of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling, complete all as specified and as directed
M&L for 15 mm thick cement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and as directed.
M & L for preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer complete all as specified.
M & L for preparation of newly plastered surface and applying three coats of white wash on ceilings.
M&L for preparing new surfaces (plastered or unplastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (white/ tinted) on walls complete all as specified and as directed by the Engineer-in-Charge.
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply Two coats of distemper oil emulsion on walls complete all as specified.
M&L for preparation of old decorative surfaces including scraping down smoke dust mould, mean cut salt and trading oils and greasy spot etc. on ceiling including cornices, plasters etc. (plastered or unplastered surfaces) and applying one coat of white (lime) wash on old washed surfaces all as specified complete.
M&L for preparation of old decorative surfaces including scraping down smoke dust mould, mean cut salt and trading oils and greasy spot etc. on wall including cornices, plasters etc. (plastered or unplastered surfaces) and applying one coat of white (lime) wash on old washed surfaces all as specified complete.
M&L for prepration of old plastered or unplastered surfaces of walls and applying one coat of cement base paint , complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of cement base paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surfaces of walls including corrices (plastered or unplastered surfaces) by scraping down smoke soot, moulds, moss and effloresnt salt and trading oil or greasy spots etc, including cornices and applying one coats of exterior weather proof paint on old decorated any surfaces walls/ foot paths , etc., all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing treatment from external surfaces of walls by brushes and washing down and stopping of surface and levelling / edging the disturbed portion plane/edges using necessary filling compound of putty to obtain smooth/regular/even finish surface with using of sand paper etc and prepare surface , applying two coats of exterior weather proof (coat) paint on plastered/concrete surfaces of walls, paths , etc., over a coat of cement base primer complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of old painted wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and as directed.
M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces of any description over 10 Cm width or girth not otherwise described.
M&L for removing plants/sherbs grown on wall/junctions with roots duly rendering berbicide chemical and making good of the existing brick/concrete surfaces of area n.exc 0.50 Sqm complete all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15 cm thickness( below or above ground floor).
M&L for PCC (1:5:10) type E-2 using 40 mm graded brick aggregate as in sunken portion complete all as specified and as directed
M & L for cleaning the sunken floor surfaces by wire brushes, brooming, removing dust by dismantling of floor, lime terracing and applying following :- (a) 10 mm thick screed bed in cement mortar 1:3 complete mixed with water proofing compound as per manufacturers instructions complete all as specified and directed. (b) Bitumen primer confirming to IS-3384-1965 @ 0.50 Kg Per sqm. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm confirming to IS - 702-1998 for water proofing membrane. (d) Applying of polymeric water proofing membrane weight not less than 3 Kg/Sqm over entire are with overlaps and sealed all as specified directed. (e) Again applying a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm over water proofing membrane. (e) Dusting dry sand @ 0.75 Kg Per Sqm over water proofing membrane. complete all as specified and as directed.
S&F in repair 32 mm dia galvanised iron spout light grade for sunken portion complete all specified and as directed.
Supply only integral water proofing compound complete all as specified and as directed.
Taking down frame or Chowkhats (w/o taking off shutter from the frame) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed.
Taking down frame or Chowkhats (w/o taking off shutter from the frame ) of any description not exc. 1.50 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specified and directed.
Supply and fixing windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows / ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14 (4000 series). complete all as specified and as directed.
Supply and fixing windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows / ventilators having frame suitable for single shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14 (3000 series). complete all as specified and as directed.
S & F Aluminium door single leaf with anodized aluminium frame of section 62.5 x 37 x 2.5 mm thick, shutter with bottom & middle rail of section 112.50 x 37 x 2.5 mm thick and styles & top rail of section 83 x 37 x 2.5 mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5.5 mm thick ordinary plain glass including necessary fittings, fixtures & aluminium snap beads complete all as specified and directed.
S & F aluminum window with aluminum anodized frame of aluminum section 62.5 x 37 x 2.5 mm thick with shutters having styles & rails of aluminum section 44.45 x 44.45 x 2.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, tower bolts, handles etc including 5.5 mm thick ordinary plain glass complete. Including providing and fixing aluminum chequered grill of anodized section of mesh 100x100mm of 08 mm dia of bar fixed to frame with 20x20 mm aluminum flat with stainless steel wire mesh fixed with screw Complete all as specified and as directed.
S&F Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window frame complete all as specified.
S&F in repair Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to wooden door/ wooden or steel window frame (including welding/repair) etc complete all as specified.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete as specified and as directed.
S &F anlge mild steel sections conforming to Gde Fe-410-0 grade A as in framing for cladding, glazing and the like including door frames/ chowkats, fixed with angle cleats and connecting plates, etc complete.
S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all as specified and directed.
Supply & fixing block board 18/19 mm thick, grade 1 quality, exterior BWP grade termite proof, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18mm wide 6 mm thick beading of Its class HW (Teak) or 0.5 mm thick PVC sheet lipping all around, fixed in repairs, complete all as specified and directed
S&F of 125 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surface complete all as specified and directed.
S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and directed.
S&F 150 mm long Aluminium door handle, cast type, anodized complete all as specified and directed.
S&F 100 mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F of 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair door stopper of aluminium, alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L non skid ceramic coloured printed tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4).
M&L non skid ceramic coloured printed tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.
M&L for vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm thick screed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
M&L for glazed coloured ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Taking down or up steel water tubing and connections of 15 mm bore removing the debris including mortar out side defence land complete all as specified and directed by Engineer-in-Charge.
All as per above Item No 52 above but 20 mm bore.
S & F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge.
All as per Item No 54 above but 20 mm bore.
S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 500 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 1000 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by Engineer-in-Charge.
S&F in repairs HDPE PVC lid (cover) for 500/1000 Litres capacity PVC tank complete all as specified and directed by Engineer-in-Charge.
S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipe and fixed 20 mm bore fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair bib taps long body, cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engineer-in-Charge.
S&F in repair two way bib taps cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engineer-in-Charge.
S&F in repair stop cock, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.
S&F in repairs angle cock cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore.
S&F in repair chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe.
Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE all as per , Everest Ceiling grid system 'Regular T-2430' or its equivalent make of "'Ramco, Charminar/Armstrong'' at any height including dismantling complete all as specified and as directed by Engr-In-Charge.
S&F in repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and directed by Engineer-in-Charge.
S&F in repair brass chromium plated waste coupling 32mm bore WHB complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 15mm dia PVC Connection 450 mm long with brass nuts complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 10 litre PVC valve less symphonic action type Low level flushing cistern with inlet ball valve float and handle incl CI bracket and 32mm bore PVC flush pipe and connection to pipe complete all as specified and as directed by Engineer-in-Charge.
S&F in repair CP Towel rail 450mm long 20mm dia fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed by Engineer-in-Charge.
S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.
S & F in repair corner glass shelf with bracket of Make-BEA-46 of Prayag or equivelent complete all as specified and directed.
S&F in repairs sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 420mm bowl size 410mm x 330mm x 160mm including waste couling and waste pipe complete all as specified and directed by Engr-in Charge.
S&F in repair 100mm bore PTMT sink waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs PVC bathroom mirror cabinet of size 450x600mm Make Prayag or its equivalent complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cistern complete all as specified and as directed by Engineer-in-Charge.
Dismantling of Stone slabs laid, bedded and pointed in any mortar complete all as specified and directed
M&L for green marble 18-20 mm thick machine cut , bedded jointed and pointed with grey cement slurry including cutting and polishing. complete all as specified and directed
M&L for machine cut kota stone slab 18 to 20 mm thick laid over and inluding 15 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry including cutting and mirror polishing Complete all as specified and directed by Engr-in-Charge.
All as per item No 80 above but in skirting over 10mm thick rendering in cement mortar 1:4 complete.
M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes all as specified.
S&F precast machine pressed PCC interlocking paver block rubber moulded of 60 mm thickness, M-35 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and directed.
M&L for coloured chequered cement concrete tiles 25cm x25cm or 30cmX30cm x22/25 mm thick, set, jointed & pointed in neat cement slurry over 20 mm screed bed in CM (1:6) , demoilition of PCC and removing of debris away from MOD land, complete all as specified and as directed by the Engineer-in-Charge
M&L for 75mm thick PCC 1:3:6 Type C1 (20mm graded aggregate) as in floor/ path/ Plinth protection including necessary form work, surfaces finished even and smooth without using extra cement complete all as specified and directed.
S&F in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap and seat cover complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs CP bottle trap with internal partition 32mm size 300 mm x 190 mm with wall connection pipe and wall flange complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back incl angle iron brackets incl waste pipe of 32 mm dia of suitable length, pvc connection of 15 mm dia & 450 mm long with PTMT nuts and waste coupling complete all as specified and as directed by Engineer-in-Charge.
S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge.
S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge. Make : Cat Part No ALD-565 of Jaquar or equivalent in Hindware / Parryware
S&F in repairs mild steel chromium plated grating (round) 125/150mm dia fixed over floor/nahani trap (with hole and without hole) complete all as specified and as directed by Engineer-in-Charge.
S& F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engr - in- charge.
S&F PVC (SWR) bends any radius for 110 mm bore PVC pipe with cement joints complete all as specified and as directed.
S&F PVC (SWR) junction single,(Single T) equal or unequal (Supplied and fixed bore of pipe in 110mm)
S& F in repair 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engr - in- charge.
S&F PVC (SWR) bends any radius for 75 mm bore PVC pipe with cement joints complete all as specified and as directed.
Dismantling of CI pipe incl all fittings from wall/trenches any type & any size
S & F for 75 mm dia cast iron soil/waste pipe in any length with or without ears with cement joints laid in trenches or in floors etc including dismantling complete all as specified and directed by Engr -in - Charge
S & F for 100 mm dia cast iron soil/waste pipe in any length with or without ears with cement joints laid in trenches or in floors etc including dismantling complete all as specified and directed by Engr -in - Charge
S&F bends any radius for 100 mm bore CI pipe with cement joints complete all as specified and as directed.
S&F bends any radius for 75 mm bore CI pipe with cement joints complete all as specified and as directed.
S&F in repair Branch pieces/T single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door complete all as specified and as directed.
S&F in repair CI vent cowl 75 mm complete all as specified and as directed.
Supply & fixing in repair Door seal complete all as specified & directed by engineer in charge .
S&F in repairs stainless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with scews complete all as specified and directed by Engr-inCharge.
S&F in repair mild steel helical door spring 300 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frame or with welding to steel frames complete all as specified.
S&F in repair curtain rods with mild steel conduit pipe 20 mm bore PVC coated of 1 mm thick including temples, brackets etc complete all as specified and directed by Engineer-in-Charge
S&F in repair 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and directed.
M & L for cleaning and removing all scales and dirt, etc, from water tanks and from mouths of circulating pipes,etc (capacity of tank exc 250 ltrs & n exc 500 ltrs)
S & F in repair PTMT long body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed
S&F in repairs for double action floor spring hydraulically regulated mode lap of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to shutter complete all as specified and directed by Engr-in-Charge.
S&F in repairs PVC (SWR) gully trap 125/110 mm setting and jointing with solvent
S&F in repairs PVC (SWR) floor trap 75mm with grating including jointing with solvent
Supply and fixing in repairs Aluminium die cast Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specified and directed.
J D ENTERPRISES
SM CONSTRUCTION COMPANY
Rishi Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .