Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC HOUSE NO 99 3RD FLOOR SK JAIN BUILDING KALIBARI ROAD DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹24.9 L+₹2.3 L (10.0%)Rejected-Finance HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹26.1 L+₹3.5 L (15.3%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Not fulfilled the NIT criteria |
Tender Value
₹22.5 L
EMD Value
₹45,000
Closing Date
19 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Nk Chaudhary
HQ 137 WKS ENGR PIN 914137 CO 99 APO
CONVERSION OF LT OH CONDUCTORS INTO LT UG CABLES FOR STREET LIGHTS AT ZAKHAMA MIL STN
2023_MES_604368_1
8776/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Zakhama
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Zakhama
₹45,000
Yes
28 Aug 2023
20 Jun 2023
26 Jul 2023
20 Jun 2023
19 Jul 2023
5 Jul 2023
Amount
Disconnecting, dismantling and taking down carefully ACSR conductors from poles of any size and setting a side and remove from site complete all as specified and directed.
Dismantling insulator of any type, any size complete all as specified and directed.
Dismantling of cross arms of mild steel channel / angle sections, supports, clamps etc. complete all as specified and directed.
Supply and fixing steel tubular swaged pole, type 410 SP 31 (Overall length 9.00 meter) conforming to IS-2713 (Part 1 to 3) 1980 complete with cast iron base plate, finial taper plug, bolts, nuts and washers, screws. Pole shall be painted with two coat of black bituminous throughout internally and externally upto planting depth and the remaining external portion shall be painted with two coats of aluminum paints over a coat of red oxide primer, including painting of red & white alternate strips of 30cm each externally from ground level upto 1.2m with synthetic enamel paint, numbering of poles complete all as specified and as directed. (Note: Excavation and earth work and PCC shall be measured and paid separately under respective items)
Supply, fixing and testing of LED street light fitting of capacity 90 watt CRI >70 , PF > 0.95 colour temperature 5700K, lumious efficiency not less than 100 lumen/watt.9000 lumens output IP-65 protection including electronic driver SMPS based constant circuit supply with lower THD, output, open/short circuit protection,over voltage protection, surge voltage protection etc.unit suitable for working voltage 140-270v AC,50 Hz pressure dia cast aluminium housing and finishing epoxy powder coated grey colour phosphrous chromate treatment with all accessories incl mounting bracket and connecting up complete including taking down old unsv LED light fitting complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth for foundation of poles, laying of cables etc not exceeding 10 sqm on plan area and getting out in hard / dense soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre depth but not exceeding 3.00 metre depth for foundation of poles, cables etc not exceeding 10 sqm on plan area and getting out in hard / dense soil complete all as specified and as directed.
Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed .
Removing excavated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed .
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of formwork complete all as specified and as directed.
Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed.
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed. (Note: Punned thickness shall be measured for payment purpose)
Supply and fixing loop in- loop out fuse junction box of internal dimension 250 x 200 x 105 mm suitable for 3 phase/4 core made out of FRP sheet with weather proof canopy and locking screw fitted with and incl 6 Amps MCB SP - 1 No, 20 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular /rail poles including necessary aluminium clamps, suitable glands, lugs and GI nut and bolts complete all as specified and as directed.
Supply, laying, connecting and testing of PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm including necessary end connector fixed along with pole structure etc with all fixing & connecting accessories complete all as specified and as directed.
Supply, Install, testing and commissioning of street light panel factory febricated (CPRI type-tested), including MCB TPN 63 A -01 No.,contactor TP 65 A -01 No, Astronomical timer, street light control panel with accessories outdoor type including connected switch gears,cables etc and suitable sheet metal enclosure test and commissioning of 440V,outdoor cubical type with suitable provision of 25 x 3 mm angular base and vertical frame along with necessary PCC foundation and locking arrangement complete all as specified and directed. Notes: The quoted rate shall be inclusive of the following :- (a) Suitable copper control wiring inside panel board, cable glands, cable lugs,supporting insulator etc. (b) The panel should be mounted min 0.30 m above the ground level. (c) quoted rate is inclusive of angular base frame and PCC foundation Earth work connected accessories. (d) Design/Drawing/bom of the panel showing the dimensions is to be obtained from manufacturer/supplier and is to be got approved from AGE(I) before placing the final order to the manufacturer. (e) Any thing missed out in the technical specification but technically required for efficient working is deemed to be included in the quoted rates. Make: Havells Cat Part No. IHXTS09120 or equivalent makes as specified in Particular specifications.
Supply, laying, connecting and testing under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 16 Sqmm 4 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 25 Sqmm 4 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item.
Supply and laying GI pipe 50 mm bore light grade with all necessary fittings, laid in trenches, fixed to wall, laid under floors, roads, along poles for protection of cables complete all as specified and as directed.
Supply and laying GI pipe 40 mm bore light grade with all necessary fittings, laid in trenches, fixed to wall, laid under floors, roads, along poles for protection of cables complete all as specified and as directed.
Material & Labour for cutting the existing hard standing/PCC/WBM road at depth not less than 45cm and 25cm wide for passing of cable through GI pipe, returning filling in complete including finishing the surfaces by providing cement concrete (1:2:4) type B-1 using 20mm grade stone aggregate) upto 20cm depth,finishing to a uniform smooth surface to match the existing surface complete all as specified and directed. Note - GI pipes shall be measured and paid seprately.
Material & Labour for preparation of surfaces of existing LT steel tubular poles 9m long including scrapping, brushing down old paint with emery paper and applying two coat of aluminium paint including cross arms, street light brackets etc and making strip upto 1.5m above ground level by black/yellow paint in alternate layers with numbering of poles complete all as specified and directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised earthing lead of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking out unserviceable earthing plate and accessories all as specified and as directed. (Note: Earth lead upto a length of 7.50 m from earthplate shall be deemed to be included in quoted rate.)
Shri Atoshe Tuccu
commercial enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .