REPAIR AND MAINT OF STREET LIGHTS/SECURITY LIGHTS FITTINGS, STREET LIGHT POLES, CABLES WITH CONNECTED WORKS AT 512 ABW AND CAFVD AREA UNDER AGE E/M-II IN GE (CENTRAL) KHADKI.

Amount

NOTE :- a) Contractor has to arrange his own vehicles along with mounted hydraulic ladder/articulated & telescopic boom lift arrangement for attending the complaint of Street light throughout entire area of CAFVD & 512 ABWS (b) Contractor shall depute minimum 2 staff daily to attend and rectify the complaint of street light. if not, Contractor shall have to bear a penalty of Rs 50.00 per complaint or maximum of Rs 500 per day on this account (c) Contractor has to attend and rectify the complaint/defect irrespective of no of trips/ Complaints as alloted by Eng-in-Charge

Taking down old unserviceable street light/flood light/post top/bollard light of any capacity complete all as specified and as directed.

Taking down old unserviceable MCB/MCCB of any capacity complete all as specified and as directed.

Taking down old unserviceable driver of any capacity complete all as specified and as directed.

Supply and fix LED Street light 60W including making electrical connection to the fitting with suitable size of service wire complete all as specified and as directed. MAKE :- Crompton Cat Part No.TRP-409-60-57-SL-GL-NSG Raptor Neo or equivalent.

Supply and fix LED Street light 90W including making electrical connection to the fitting with Suitable size of service wire complete all as specified and as directed.. MAKE :- Crompton Cat Part No. TRP-411-90-57-SL-GL-NSG Raptor Neo or equivalent

Supply and fix LED Street light 120W including making electrical connection to the fitting with Suitable size of service wire complete all as specified and as directed. MAKE :- Crompton Cat Part No. TRP-411-120-57-SL-GL-NSG Raptor Neo or equivalent

Supply and fix LED Flood light 70W including making electrical connection to the fitting with Suitable size of service wire complete all as specified and directed by Eng-in-Charge. MAKE :- Crompton Cat part No. Rover pro LFL-80-CDL/60-M or equivalent.

Supply and fix LED Flood light 100W including making electrical connection to the fitting with Suitable size of service wire complete all as specified & directed by Eng-in-Charge. MAKE :- Crompton Cat part No. Rover pro CFS-504-100-57-60D-SL-GL-NSG or equivalent.

Supply and fix LED Flood light 120W including making electrical connection to the fitting with Suitable size of service wire complete all as specified & directed by Eng-in-Charge. MAKE :- Crompton Cat part No.Rover pro TFS-504-120-57-60D-SL-GL-NSG or equivalent.

Supply and fix LED Post top luminaries 40w decorative post top for 360 degree indirect light fixing on existing pole with all necessary fixing arrangement and all accessories prewired including connecting up with twin core copper conductor cable of suitable size complete all as specified & directed by Eng-in-Charge. MAKE :- Crompton Cat Part No LPTO-40/ CDL or equivalent.

Supply and fix LED bollard light fittings, LED 10Watt, including all fixing material and earth work complete and connected to nearer electric pole all as specified and as directed. MAKE :- Crompton Cat No: LBLSN-10-CDL or equivalent

Supply and fixing at 5 to 9 mtr height-100W Industrial LED Highbay luminaire with > 100 Lm/W, with complete accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt including taking down old one complete all as specified and directed by Engineer-in-Charge. MAKE :- Surya Cat Part No SLE HB 100W COMET NEO-N or equivalent NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washers or clamps required to be replaced if old one are found unserviceable.

Supply and fixing at 5 to 9 mtr height-150W Industrial LED Highbay luminaire with > 100 Lm/W, with complete accessories having IP 66 degree of protection, power factor >0.95,THD<10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt including taking down old one complete all as specified and directed by Engineer-in-Charge. MAKE :- Surya Cat Part No SLE HB 150W COMET NEO-N or equivalent NOTE :- The quoted rates are deemed to be included the cost of Nut-bolts washers or clamps required to be replaced if old one are found unserviceable.

Supply and fixing street light mounting bracket, made out of Light grade GI Tubing 32 mm bore, bend into shape inner angle not less than 120° and over all length not less than 1.0 Mtr including suitable size clamps made from not less than 25x3 mm MS strip, Nut, bolts 12 mm dia with washers including taking down old one complete fixing arrangement.

Excavation in trenches in any type of soil not exceeding 1.5 Metre deep and not exceeding 1.5 metre width and getting out including forming bottom surface & sides to required slope/size as directed by the Engineer-in-Charge

Material and labour for sand/fine dust cushioning to under ground cable providing with a layer of and 08 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and directed by Engr-in-charge NOTE :- punning thickness of 18 cm will be measured for payment

Supply and laying un-reinforced precast concrete cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed complete all as specified and directed by Engr-in-charge.

Supply and Lay LT underground cable XLPE insulated armoured heavy duty 1100 Volts grade with aluminium conductor multistranded including centre glands / lugs / jointing materials etc. laid in trench or fixed it to wall of size 10 Sqmm 2 core including dismantling of old one, connecting testing and commissioning complete all as specified and directed.

Description all as per item No 21 above but 16 Sqmm 4 core

Description all as per item No 21 above but 25 Sqmm 3.5 core

Description all as per item No 21 above but 35 Sqmm 3.5 core

Description all as per item No 21 above but 50 Sqmm 3.5 core

Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 2.5 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burnt electric cable complete all as specified and as directed.

Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 4 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burnt electric cable complete all as specified and as directed .

Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 6 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burnt electric cable complete all as specified and as directed .

Supply and fixing in replacement of PVC insulated and sheathed unarmoured two core aluminium conductor service cable 2 core 10 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burnt electric cable complete all as specified and as directed .

Supply and fix PVC sheathed 1100V grade flat three core stranded aluminium conductor of size 2.5 sqmm including conduit pipe connecting from SMC box to street light fitting including taking down old cable complete all as specifed and directed by Eng-in-Charge

Material and labour for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 5 Ohms including testing complete all as specified and as directed. MAKE :- U-Protec or equivalent NOTE :- If the desired result not obtained after testing the contractor should do re-eathing without any extra cost.

Supply and fix 40 mm bore GI tubing light grade in trenches or on pole for cable protection complete all as specified and as directed.

Material and labour aluminum lugs eye lid or barrel type complete with cripping/soldering etc including removing the wornout lugs suitable for aluminium cables/copper cables of sizes from 16 Sqmm to 95 Sqmm complete all as specified and as directed.

Supply and fix MCCB 415V, 3 phase 50 HZ FP 63 to 100 Amps breaking capacity 16KA complete all as specified and as directed. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.

Supply and fix MCCB 415V, 3 phase 50 HZ FP 125 Amps breaking capacity 16 KA complete all as specified and as directed. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.

Supply and fix MCCB 415V, 3 phase 50 HZ FP 200 Amps breaking capacity 36 KA complete all as specified and as directed. MAKE :- Legrand or equivalent in Schneider/Havells/ CG/ L&T.

Supply and fix MCB, single pole, 6-32 Amp, 240 Volts, 'C' Curve 10KA complete all as specified and as directed. MAKE :- Legrand ( DX3)/C&S/Schneider/L&T

Supply and fix MCB, Triple pole and neutral , 40 Amp, 415 Volts, 'C' series 10 KA complete all as specified and as directed. MAKE :- Legrand ( DX3)/C&S/Schneider/L&T

Supply and fix MCBTriple pole and neutral , 63 Amp, 415 Volts, 'C' series 10 KA complete all as specified and as directed. MAKE :- Legrand ( DX3)/C&S/Schneider/L&T

Supply and fix LED power output driver of LED street light with power output up to 45W complete all as specified and as directed.

Supply and fix LED power output driver of LED street light with power output from 45W to 60W complete all as specified and as directed.

Supply and fix LED power output driver of LED street light with power output from 60W to 90W complete all as specified and as directed.

Supply and fix electronic internal surge protector cap 10 KV suitable for different type and different make LED street / flood lights as per old / existing makes like C&S, Havells, HPL, Bajaj, Crompton etc. fixed internaly in repairs complete all as specified and as directed.

Disconnecting and taking out existing SMC of any size and in any position on pole and Supply and fix in repair sheet moulding compound junction (SMC) suitable for terminating 2 Nos 4 x 6/10/16 Sqmm UG cable including S&F of one in Nos MCB SP 6-32A including cable glandes- 2 Nos, and two way connector 1 No, including dismantling old one complete all as specified and as directed. MAKE :- Sintex/National

Supply and fix AlphaRex digital time switches-Astro D22 astro 230V 50Hz R5a-20T suitable for street light including making electrical connection to the terminals of astro switch & Setting the On/Off time complete all as specified and as directed by Eng-in-Charge. MAKE :- Cat part No.4126 57of Legrand or equivalent make of Havells/L&T

Material and labour for straight through ( Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm including dismantling the old burnt cable joint termination complete all as specified and as directed.

Material and labour for straight through ( Heat Shrinkable) cable jointing kit for 1.1 KV grade cable complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm including dismantling the old burnt cable joint termination complete all as specified and as directed.

Material and labour for preparation of old painted surface of LT Steel tubular pole of any length by removing all dirt, dust, etc and painting complete surface up to pole top including connected accessories with dual coat of apex exterior, synthetic enamel paint over a coat of primer of approved colour of black and white strip 30 cm height (Total 5 Nos) & rest of the height of the pole is in silver colour aluminium paint, including bracing support on poles and writing of identification Nos with proper stencil cut etc as per directions by Engr-in-Charge

Material and labour for preparation of old painted surface of F/P box/LT Panel by removing all dirt, dust, etc and painting complete surface including connected accessories with one coat of synthetic enamel paint of approved colour over a coat of primer including writing of identification with proper stencil cut etc as per directions by Engr-in-Charge

Supply and errect in true vertical position LT electric pole, Octogonal Pole, hot dip galvanised, with base plate of 220x220x12 mm thick, 07 Mtrs Long, top dia 70mm, bottom dia- 135mm, thickness of sheet- 3 mm, including Single arm GI bracket, inbuilt cable junction box with door, connection plate, MCB 6A, duly connecting existing LT UG cable, cable lugs, work included necessary earth work and RCC foundation as per manifacturers recommendation complete all as specified and as directed . MAKE :- Bajaj / Crompton or as approved by GE NOTE :- Earth work, PCC foundation as per manufacturer recommendation included in the unit rate.

Supply and errect in true vertical position steel tubular swaged poles in replacement complete with MS base plate of 6mm of size 300mm X 300mm finial taper plug,pole cap, bolts, nuts and washers screws, pole made out of ERW MS tubing as per IS-1161 and pole shall be as per IS-2713 Part II type 410 SP-31 (9.00 Mtrs Long) complete including one coat of red oxide zinc chrome primer and two coats of Aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete complete all as specified and as directed NOTE :- Excavation and earth work, PCC in foundation /plinth block/coping shall be measured and paid separately

Material and labour for dismantling electric pole any type any size and removing from site all as specified and as directed.

Excavation in trenches n.exc. 1.5 mtr in wide and exc. 1.5 mtr but n. exc 3.0 m in depth and getting out in hard / dense soil complete all as specified and directed.

Material and labour for Cement concrete in foundation filling and mass concrete 1 : 4 : 8 type D2 with 40mm aggregate complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC 1:3:6 type C-1 with 20mm agregate in copping including necessery form work all as directed by Engr-in-Charge

Material and labour for cutting through existing bituminous road /PCC/floor/ along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finishes complete all as specified. NOTE :- GI Pipe / RCC pipe will be measured and paid seperately in respective item.

Supply and fix in repair DX3 Power contactor suitable for power supply 63 Amps 4 NO Contactor including making electrical connection to the contactor complete all as specified & directed by Eng-in-Charge. MAKE :- Cat part No.4125 53 of Legrand or equivalent make of Havells/L&T

Material and labour for disconnecting LT XLPE cable of any size from LT Panel or any location as directed for finding fault and Material and labour for defect rectification underground cable laid in trenches or any location by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. all as directed. NOTE :- (i) The fault locating equipments will be brought to site within the 12 hours of instruction from Engr-in-Charge. (ii) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and has to be rectified within 12 hours after notification, failing which Rs 500/- per day per complaint will be recovered from the dues to the contractor. (iii) Rates included necessary earth work and excavation.

Supply and laying of aerial bunched XLPE LT Cable of Size 16 sqmm 4 core (16x3+16x1) 1100 Volts grade with aluminium conductor multistranded including centre glands/lugs/jointing materials/all fixing accesories etc. complete all as specified and directed of Eng-in-Charge

Supply and laying of aerial bunched XLPE LT Cable of Size 25 sqmm 4 core (25x3+25x1) 1100 Volts grade with aluminium conductor multistranded including centre glands/lugs/jointing materials/all fixing accesories etc. complete all as specified & directed of Eng-in-Charge

Supply and laying of reflective radium Night safety water proof sticker of Suitable colour of dimension 50.8 mm X 48 M of High intensity conspicuity on street light poles complete all as specified & directed of Eng-in-Charge

Dismantling of stone sett paving laid bedded and pointed in cement mortar of any description or thickness complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n exc 15 cm thickness ( below or above ground level) complete all as specified and directed.

Material and labour for cement concrete 1:4:8 type D-2 ( using 40 mm graded agg) as in sub base for stone sett paving complete all as specified and directed upto 100 mm thick finished even and fair all as specified and directed.

Material and labour for stone sett flooring with stone setts of size 200 to 150 mm long ,150 to 200 mm wide and 150 mm deep and sides dressed, bedded in 50mm thick screed in cement mortar 1:6 and joints 20 mm thick ; grouted in cemnt mortar 1:2 with an admixture of metallic floor harder 5% by weight of cement and struck flush complete all as specified and directed by Engr-in-Charge.

Description all as item no 65.00 above but except stone complete all as specified and directed by Engr-in-Charge.

Material and labour for flush pointing 20mm thick to stone sett paving any decription in cement mortar 1:3 with an admixture of metallic floor hardner 5% by weight of cement complete all as specified and directed.

Removal of debris ( concrete, broken stone etc.) to out side defence land (distance exceeding 1.5 KM but 5KM from the site ) an depositing where directed.

Supply, installation, commissioning and testing of outdoor type feeder pillar panel box, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos aluminium bus bar, of capacity 100 Amps fabricated in factory having modern fabrication duly powder coated painting, dust and vermin proof and degree of protection not less than IP-55 . The panel shall be made out of 3.00mm thick CRCA mild steel sheet , front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level incl PCC work complete all as specified and directed. Including the following:- (a) Incomer MCCB 63 amps 16 KA (b) DX3 Power Contactor , 3 phase 4NO (c) Alpha rex digital type Timer switch (d) Intelligent panel meter (e) Indicator lamp set of three

SKS Electricals (BID ID -3118362)

tulsani associates (BID ID -3118326)

Rama Electricals (BID ID -3119351)

ONKAR ELECTRIC AND GENERAL STORE (BID ID -3119568)

T.H.ASSOCIATES (BID ID -3118369)

M/S. Niksun Electro-Infra Private Limited (BID ID -3118571)