Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹15.2 L+₹2.4 L (18.6%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 3 | L3₹15.8 L+₹3.0 L (23.1%)Rejected-AOC | L3 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ CWE Rajouri PIN-900129 C/o 56 APO
REPAIR /REPLACEMENT OF OLD UNSV PIPE LINE AND OTHER CONNECTED WORKS UNDER AREA OF AGE B/R-I OF GE 881 EWS
2022_MES_558111_1
CANO-CWE/PNH-70/2022-23
Open Tender
Support/Maintenance Service
Item Rate
180 days
AoR of AGE B/R-I of GE 881 EWS
Class E Category a(ii)
9 documents required · 9 mandatory
₹500
GE 881 EWS
₹40,000
Yes
23 Dec 2022
17 Oct 2022
21 Nov 2022
17 Oct 2022
14 Nov 2022
31 Oct 2022
Amount
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in soft / loose soil, complete all as specified.
Returning, filling in trenches including spreading leveling, watering and ramming in layers not exceeding 25 cm, complete all as specified.
Removing of surplus soll not exceeding 50 mtr and deposited where directed at a level not exceeding 1.50 m above the strating point, complete all as specified.
Steel water tubing 20mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees short pieces, connectors, diminishing pieces, caps plug etc fixed to walls and ceiling or laid in floors in replacement, complete all as specified.
Description all as per item No-04 above but 25 mm dia pipe
Description all as per item No-04 here-in before but 40 mm dia pipe
Steel water tubing 20mm bore medium grade galvanized with all fittings like socket, union elbow , bend, tees short pieces, connectors, diminishing pieces, caps plug etc jointed and laid in trenches in replacement, complete all as specified.
Description all as per item No-07 above but 25 mm dia pipe
Description all as per item No-07 here-in before but 40 mm dia pipe
Description all as per item No-07 here-in before but 50 mm dia pipe
Description all as per item No-07 here-in before but 80 mm dia pipe
Description all as per item No-07 here-in before but 100 mm dia pipe
20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
25mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
40mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
50mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
Construction of brick masonry valve pit of size 100 cm x100 cm x100 cm(internal dimension ) including excavation in any type of soil, returning filling around foundation and removal of surplus soil to a distance not exceeding 50m, PCC 1:4:8 type D2 as in foundation, brickwork in cement mortar 1:6,10mm thick plaster in cement motor 1:4 to internal surface and flush pointed externally as the work proceeds in the same mortar, pit cover with MS sheet cover 3.15mm thick and frame made out of angle iron frame 40 mm x 40 mm x 6 mm with locking arrangement and handle with fixing arrangement fixed on 40mm thick PCC coping 1:2:4 type B-1 and painting with synthetic paint two coat over a coat of red oxide primer with & including dismantling of old valve pit, complete all as specified and directed by Engr-in-Charge .
Description all as per item No-17 above butt 90cm x 90cm x 90cm -ditto-.
Sluice valve cast iron of size 100mm dia ISI Marked with flanged ends drilled with steel stem wheels head shuts and open direction cast on it, class PN-1.0 confirming to IS:14846-2000 including necessary fixing arrangement such as rubber insulation, packing rings, jointing materials nuts, bolts, washers gaskets and packing materials, etc of suitable size in replacement including testing complete all as specified and as directed by Engr-in-Charge.
Description all as per item No. 19 above but 80 mm bore -ditto-
Cast iron reflux valve 100 mm bore, heavy duty flanged ends complete including nut bolts, washers, packing sheet etc. In replacement, complete all as specified and directed.
Description all as per item No. 21 above but 80 mm bore -ditto-
Description all as per item No. 21 here-in before but 50 mm bore -ditto-
Cast iron Air Release Valve 80mm bore, with two air out lets in replacement, complete all as specified and directed.
M&L for Lifting /lowering unservicable submercible pump assembly completely any type/size up to 30HP along with column / delivery pipe of 50/80mm dia after disconnecting the electrical connection from the deep tube well/Dugwell of various depth, segregating components for carrying out repair work such as rewinding of burnt motor and servicing of pump etc and re-assembling after repair, lowering in to the bore well, including aligning and commissioning complete all as specified and directed. Note:- (a) Unit rate quoted deemed to include only labour for taking up & lowering the submersible pump from bore well along with delivery pipe complete. (b) Repairs/rewinding of submersible pump shall be measured under relevant items. (c) Replacement of column pipe, spare parts will be measured and paid separately as in supply only under relevants items.
Supply only following spare parts for submercible pump set vertical type up to 20HP complete all as speified and directed.
SS impeller as per existing type and make.
Thrust bearing as per existing type and make.
Thrust plate set as per existing type and make.
Sand guard as per existing type and make.
Stainless steel bush as per existing type and make.
Pump shaft as per existing type and make.
Taking out unserviceable submersible motor upto 30 HP from the existing place and transporting the same to authorised workshop dismantling and rewinding the burnt motor with suitable gauge of PVC insulated supper enamelled copper wire including re-fixing at same location including aligning and testing, commissioning complete all as specified and directed.
Dismantling and taking out the centrifugal pumping set with motor from the existing foundation for carring necessary repair/ servicing by replacing the unservicable parts including fixing of new coupling (CI/rubber) as per existing all as required at site of work of capacity upto 40 HP, including re-fixing at same location including aligning and commissioning complete all as specified and directed. Note:- (a) Unit rate quoted deemed to include only labour for transportation and reapir. (b) supply only Spares /rewinding of pump set shall be measured under relevant items.
Supply only following spare parts for centrifugal pump set up to 40 HP complete all as speified and directed:-
CI impellers as per existing type and make.
Diffuser as per existing type and make.
Neck ring as per existing type and make.
Shaft bush as per existing type and make
Shaft as per existing type and make.
Roller bearing as per existing type and make.
Stuffing box gland as per existing type and make.
Bearing 6307/6309/ 6312/7307/730 8Make SKF/SBC
Taking out worn winding of centrifugal pump motor of capacity upto 40 HP carefully and rewinding the same with existing size of super enamelled copper winding wire ,including necessary varnishing and insulating material baking etc, transportation to workshop and back at site complete all as directed by Engineer-in-Charge.
Taking down/disconnecting the existing unserviceble Star Delta starter of Centrifugal / submersible pump from motor control panels of various pump houses and replace with new Star delta starter of capacity 10 HP to 25 HP, three phase, including making electric connection, complete all as specified and directed.( Make: C&S / BCH/ L &T)
Description all as per item No. 31 above but of capacity 30 HP to 60 HP -ditto-
M&L for repair of starter with disconnecting all electric connections, and replacment of unserviceable parts like contactor, relays, coil etc and connecting to the existing pump set of cap upto 60 HP, including testing complete all as specified and directed.
S&F Submersible cable flat Three core PVC insulated and PVC shedthed industrial copper cable of size 6 Sqmm 1100 Volts for connection from starter to motor complete all as specified and directed. Make: Finolex/ CCI/ Havell's.
Supply and fixed in replacement, Manually Operated Oil Immersed Star Delta Motor Starter for 60 HP Motor, 3 phase, 415 Volt, with thermal over load relay, single phasing protection and free mechanism with single contact duly oil filled including testing and taking down old UNSV starters all as specified and directed by Engineer-in-Charge. Make: Havells/ C & S/ L&T .
Supply only chlorination chemical highly efficient (high strength) calcium hypochloride 65% to 70 % chlorine content based granular disinfectant more stable in sealed container, no Sodium/iron/ Mercury/Heavy metal contaminations. Make: PURI CHLOR or equivalent as approved by GE. Note:- (i) The contractor shall produce manufacturer’s test certificate and purchase vouchers of calcium based granular disinfectant. (ii) The calcium based granular disinfectant shall be brought at site in sealed plastic container . (iii) Qty shown at Col 3 will not accepted at one time as the material having lesser expiry period.
M & L in repair for run lead joint / welding joint including spun yarn, welded rod, pumping/bailing out of back flow accumulated water in trenches, burning out and taking out old lead, complete to spigot and socket cast iron/GI pipe and fitting and cocking /welding with suitable quantity of lead or welding rod of size upto 100 mm bore pipe, complete all as specified.
Preparation of surface for Painting of pump/ motor of any type and any capaicty and Pipe of any dia for complete surfaces for painting applying two coats of synthetic enamel paint over one coat of red oxide primer as per colour code on pump sets including SM/MES No of appropriate size of letters with white paint, complete all as specified and directed by Engineer-in-Charge.
M&L for cleaning of under ground sump, semi under ground sump of capacity 10000 to 50000gallons (Drinking water sump) after bailling out of water from tank & cleaning of all sides of wall , top, bottom with fresh water, with the help of pressure jet pump ( Maxium pressure up to 120 bar ) and vacuum suctioner pump, spray of chemical for anti fungal approved by WHO on all sides of walls after cleaning and applying two coats of white wash on external surfaces and writing date of cleaning on the tank complete all as directed by Engineer - in -charge .
Supply & fixing of flange with gasket for 100mm dia GI Pipe with fixing accessories, complete all as specified and as directed by Engr-in-Charge.
Supply & fixing of flange with gasket for 80 mm dia GI Pipe with fixing accessories complete all as specified and as directed by Engr-in-Charge.
Supply & fixing of nut and bolt of 26 No size with fully threaded top to bottom complete all as specified and directed.
narayan construction
M/S PARSHOTAM KUMAR GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .