REPAIR / MAINTENANANCE OF GEYSERS, EXHAUST FANS, EARTHING, SUB MAIN WIRING IN MD/OTM ACCN AND LT SUPPLY NETWORK WITH ALLIED WORKS AT RMS CHAIL UNDER GE JUTOGH

Amount

Taking down carefully aluminium point wiring (light, Fan, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit including making good the disturbed portion/surface complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed.

All as per item No 2 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

All as per item No 2 above but for one 3/5 pin socket 5 Amp on independent board with 2.5 sqmm wire with 2.5 sqmm earth wire complete all as specified and directed.

All as per item No 2 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4 Sqmm complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing N caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed.

All as per item No 6 above but for one 3/5 pin socket 5 Amp on same board.with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

All as per item No 6 above but for one 3/5 pin socket 5 Amp on independent board.with 2.5 sqmm wire with 2.5sqmm earth wire complete all as specified and directed.

All as per item No 6 above but for 3/5 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4 Sqmm complete all as specified and directed.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way complete all as specified and directed .

S&F socket 3/5 pins, 5/6 Amp, flush type piano (multi purpose) complete all as specified and directed .

S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed .

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed .

S&F Ding Dong door bell complete all as specified and directed .

S&F ceiling rose, PVC / polycarbonate isolated body of size, 65x50mm, three terminals complete all as specified and directed .

S&F Batten holder PVC/Polycarbonate base / back suitable for CFL lamp complete all as specified and directed .

S&F in replacement 36/40W LED (Size 2'x2') square shaped Recess mounting type luminaire having white polycarbonate body & Alumium heat shink with PMMA diffuser, 5700K including connecting three core copper cable up to ceiling rose complete with separate electronic driver & high brightness LEDs white colour complete all as specified and directed. Make Polycab Cat Part No PCGLBLP 01 40 E 57/ Crompton Cat Part No LCPL-36-CDL/ Bajaj Cat Part No-BZRSQL 36W GZi WH LED.

S&F in replacement 18W LED (Size 1'x1') square shaped surface/ Recess mounting luminaire suitable for hanging on any surface inclluding connecting twin core copper cable up to ceiling rose complete with separate electronic driver & high brightness LEDs white colour complete all as specified and directed. Make Polycab Cat Part No SCINTILLATE LED PANEL SLIM SQUARE 18 W/ Crompton Cat Part No LSDN-18-CDL/ Bajaj Cat Part No -BZRSQL 18W WH .

S&F in replacement 36W LED(4 x 1) surface / Recess mounting luminaire suitable for hanging on any surface including connecting twin core cable up to nearest point complete with separate electronic driver & high brightness LEDs white colour complete all as specifed and directed. Make Polycab Cat Part NoSPCGLP 1X4 40 57/ Crompton Cat Part No LCTLSN-40-CDL/ Bajaj Cat Part No-BZRLL 36 W GZ1 WH.

S&F LEd tube light fitting, 1x10watt, 2 ft long, 230v , surface mounting luminaire suitable for hanging on any surface including connecting twin core cable up to nearest point complete with separate electronic driver & high brightness LEDs white colour complete all as specifed and directed. Make Polycab Cat Part No INTENSO LXS LED BATTEN 2 FEET 12 W/ Crompton Cat Part No LCTL-9-CDL/ Bajaj Cat Part No BCLSB 10 WH .

S&F LED Bulkhead luminaire 10W Decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings all as specified and directed. Make Polycab Cat Part No 60 BHE 10W 60/ Crompton Cat Part No LBHP-10-CDL/ Bajaj Cat Part No BIBWP 10W LED .

S&F LED building secuity light 25 watt, fixed on existing bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings all as specified and directed. Make Polycab Cat Part No PCGLS T1 25 N/ Crompton Cat Part No LSTS-25-CDL/ Bajaj Cat Part No BCLST 25W LED .

S&F LED tube light along with fixture, 18/20W (4 feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed. Make Polycab Cat Part No INTENSO LXS LED BATTEN 4 FEET 18 W/ Crompton Cat Part No LCTL-18-CDL/ Bajaj Cat Part No BCLSB 18 WH .

S&F in replacement round type recessed mounting LED luminaire 18/20 Watt including making arrangment in ceiling as per the size of fittings and connecting twin core cable up to nearest point complete with Inbuit/separate electronic driver & high brightness LEDs Natural white colour complete all as specifed and directed.

S&F in replacement LED Bulb warm white colour with B-22 base inplace of burnt CFL of capacity 9 Watt complete all as specified and directed. Make :-Bajaj or equivalent in Havells/ Philips/ Polycab/ Syska

M&L for replacement for submain wiring with 2X6.0 Sqmm + 1X6.0 Sqmm Earth Wire single core PVC insulated FRLS PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase , neutral, earth & one run PVC conduit/ casing shall be measured one unit length.

M&L for replacement for submain wiring with 2X10.0 Sqmm + 1X10.0 Sqmm Earth Wire single core PVC insulated FRLS PVC Sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement, all accessories complete all as specified and directed. Note: Three runs of copper wire for phase , neutral, earth & one run PVC conduit/ casing shall be measured one unit length.

S&F VTPN prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down complete all as specified and as directed. Note :- MCB/SP/TP shall be measured in respective items.

S&F sheet metal enclouser Distribution board 4 way TP&N Double Door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB complete including taking down complete all as specified and directed.

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete including taking down complete all as specified and directed.

All as per item No 29 above but 8 ways complete all as specified and directed.

All as per item No 29 above but 4 ways complete all as specified and directed.

S&F MCB TPN 63 Amps 415 V, 10 KA incl all termnials, fitting etc complete all as specified and directed.

S&F MCB SPN 06 to 40 Amps 240V, 10 KA incl all termnials, fitting etc complete all as specified and directed.

S&F MCB SP 06 to 40 Amps 240 V, 10 KA incl all termnials, fitting etc complete all as specified and directed.

S&F in Repairs Geyser Element Tringular type 1.5 KW complete all as specified and directed.

S&F in Repairs Geyser thermostate 9/11" for 25 Ltr cap Geyser complete all as specified and directed.

S& F in repairs PVC connection 15 mm size with PTMT nuts of length not less than 300 mm suitable for hot water & cold water geyser connection complete all as specified and directed.

M&L for rewinding of exhaust fan of size 300 to 450mm sweep Including Taking down ,dismantiling, opening ,cleaning, adjustment, re fixing , cleaning, greasing, painting, replacing minor spares (ie nut, bolt,washers) and rewinding with proper size enamelled copper wire varnishing with tranporting from site to workshop & back to be fixed its original location etc complete all as specified and directed. Note:- spares mentioned below will be measured and paid separatelly.

Ball bearing as per sample

Brass bushes as per sample

3.5 mfd capacitor

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point, including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in soft / loose soil including taking out faulty cable / cable / cable covers and GI pipe complete all as specified and directed.

Returning filling in, including spreading levelling watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc 50m distance and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

Supply, fixing or passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 10 sqmm 2 core including Brass compression cable gland, terminal lug etc and testing complete including taking down of unsv cable all as specefied and as directed

All as per item No 47.00 above, but nominal cross sectional area 16 sqmm 4.0 Core complete all as specified and directed.

All as per item No 47.00 above, but nominal cross sectional area 25 sqmm 4.0 Core complete all as specified and directed.

All as per item No 47.00 above, but nominal cross sectional area 70 Sqmm 3.5 Core complete all as specified and directed.

Supply, laying and fixing of HDPE pipe of size 50 mm dia with all connected accessories complete all as specified and directed.

S&F in repair LED Street Light Luminaries 70/ 72 watt fitting aesthetically designed for road lighting, having secondary optics with uniform distribution of light. Pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V including LED driver complete all as specified and directed. Make: Crompton Cat part No LSTP-72-CDL/ Bajaj Cat part No BFTFG 72W LED V3/ Polycab Cat part No PCGLS T1 72 N.

S&F in repair energy efficeint LED Street Light Luminaries 60 watt fitting made of pressure die cast aluminium housing suitable for heat sink design to ensure fast heat dissipation in built driver, Degree of protection IP 66 protection, CCT 5700K (+/- 300 K) with operating voltage range 90V to 300 V including suitable size of wire from fittings to OH line/ pole box as per site requirement complete all as specified and directed. Make :-Polycab cat part No PCGLS T1 60 N / Havells cat part No ENDURA PEARL PLUS SL60WLED 757SASY TOPC/ Bajaj Cat part No BRTFG 60W LED V3 / Crompton cat part No LSTP-60-CDL

S&F in repair LED Street Light Luminaries 45 watt fitting aesthetically designed for road lighting, having secondary optics with uniform distribution of light. Pressure die cast aluminum housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage range 120 to 270 V including LED driver ccomplete all as specified and directed. Make: Crompton Cat part No LSTP-45-CDL/ Bajaj Cat part No BFTFG 45W LED I/ Polycab Cat part No PCGLS T1 45 N.

S&F in repair LED Flood light 200W decorative type , IP-66 having powder coated PDC Aluminium body with toughned glass visor fitted inbuilt LED driver, 5700K, efficacy min 100 lumens/watt duly electrical connection with suitable size of wire from fittings to pole box/ OH line as per site requirement complete all as specifed and directed. Make:- Crompton Cat part No - LSFO-200-CDL/60/ Polycab Cat part No PCGLF T1 01 200 57/ Bajaj Cat part No BJFL 200W LED I/ Havells Cat part No JETAIRISFLS 200W LED 757 PSYMLTG

S&F in repair street light bracket made out of 40mm GI pipe medium grade of length1.2mtr and bend to shape for fixing of street light fitting including two Nos of FI 50x6mm clamps with suitable nuts and bolts complete all as specified and directed.

M&L for flexible cable three core PVC insulated, PVC sheathed multi stranded copper conductor of size 2.5 Sqmm for connection junction box / Distribution box to security light with proper fixing in wall with saddles, clamp etc complete all as specified and directed.

S&F in replacement of 40 Watt LED post top in spherical shape polycarbonate difuuser and warm white colour with IP65 protection, control wiring and making good to the disturbed portion complete all as specified and directed. Make: Crompton Cat part No LPT0-40-CDLL/ Bajaj Cat part No BGCL 40W LED WH/ Polycab Cat part No PCGLP 01 40 O.

M&L for GI pipe light grade of size 50 mm dia laying in trenches/ under floor/on walls / gate / for protection of UG cables / fixing of garden / post top lantern complete including taking down complete all as specified and directed.

Supply and fixing in repairs of 10 sqmm 2 core 1100V grade heavy duty cable PVC insulated stranded AIuminium conductor served with inner sheathed by PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not move them 1 Meter apart including 4mm suspension wire oner twin core cable flat or circular for service connection complete all as specified and directed.

S&F in repairs of 16 sqmm 2 Core 1100V grade heavy duty cable PVC insulated stranded AIuminium conductor served with inner sheathed by PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not move them 1 Meter apart including 4mm suspension wire outer twin core cable flat or circular for service connection complete all as specified and directed.

S&F in replacement MCCB 400 Amps AC 4 pole 415 Volt 36 KA breaking capacity as per IEC 60947-2 adjustable thermal magnetic trip unit (TMD) range 400 Amp complete all as specified and directed.

S&F in replacement MCCB 250 Amps, AC 4 pole 415 Volt 25 KA Breaking Capacity as per IEC 60947-3 adjustable thermal magnetic trip unit range 250 Amp complete all as specified and directed.

S&F in replacement MCCB 160 Amps, AC 4 pole 415 Volt 25 KA Breaking Capacity as per IEC 60947-2 adjustable thermal magnetic trip unit range 160 Amp complete all as specified and directed.

S&F in replacement MCCB 100 Amps, AC 4 pole 415 Volt 20/25 KA Breaking Capacity as per IEC 60947-2 adjustable thermal magnetic trip unit range 100 Amp complete all as specified and directed.

S&F in replacement ON Load changeover switch enclosed type of rating160 Amps 4 pole 415 volt complete all as specified and directed.

S&F in repair DOL starter for 5 HP ,3 Phase ,415 Volts booster pump with all connection complete and old Unsv DOL starter deposite to MES Store yard complete all as specified and directed.

M & L for Servicing of OLD/ UNSV -SOLAR street light fitting of capacity 23-28 Watt 230 V including servicing of solar panel 12 V 100 W, Low maintenance tubular battery 12V,75AH by filling of Distilled water and first charging including replacement of damaged battery terminals, securing of all electrical wire circuit and connections, reparing of damaged foundation complete system if required complete all as specified and directed. Note:- 1. All type of T & P, Distilled water, control cable upto battery terminal, PCC, ladder & tripod etc required at site will be arranged by the contractor and rates for the same will be deemed to be included in the quoted rate. (Spares required to make functional of solar light shall be measured and paid seperately under relevent items of Sch 'A')

Spares of Solar security light

Replacement of Solar PV Module 74W (As per existing) complete all as specified and directed.

Replacement of White LED based light souce 12W (As per existing) complete all as specified and directed.

Replacement of Driver of solar street Lights (As per existing) complete all as specified and directed.

Replacement of Battery rating of 12V & 75AH (As per existing) complete all as specified and directed.

M/S Sonu Traders