SMART PERIODICAL SERVICES TO MD/OTM ACCN AND REPAIR/ REPLACEMENT TO ROOF TREATMENT, PLUMBING AND SANITARY FITTING UNDER AGE B/R-I AT SRI GANGANAGAR MIL STN

M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying two coat of white wash complete all as specified & directed by Engineer-in-Charge.

All as per item No 1 above but two coats of white wash on ceiling surface complete all as specified & directed by Engineer-in-Charge

M&L for complete removal of existing treatment by scrapping upto plastered surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc complete all as specified & directed by Engineer-in-Charge

M&L for applying water proof putty @ 0.5 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted surface which scrapping is done to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface

M&L for one coat of acrylic water based interior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified & directed by Engineer-in-Charge

M&L for applying two coats of distemper (Oil emulsion) on internal surface walls/ceileing of approved tint applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI including one coat of primer and allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified & directed by Engineer-in-Charge

M&L for applying one coat of distemper (Oil emulsion) on internal surface walls/ceileing of approved tint with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI over primed surface complete all as specified & directed by Engineer-in-Charge.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 ltr(undiluted) /10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified & directed by Engineer-in-Charge

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, Allow 6-8 hrs to dry the surface for painting of subsequent coats over exterior primer complete all as specified & directed by Engineer-in-Charge.

All as per item No 09 above but one coats of Premium acrylic emulsion paint complete all as specified & directed by Engineer-in-Charge