PERIODICAL SERVICES AND CERTAIN B/R REPAIR TO OTM ACCN LIKE WOODEN/ALUMINIUM JOINERY WIREMESH ALUMINIUM SHEETING BATHROOM FLOOR TILING AND OTHER MISC WORK UNDER AGE BR II OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

M&L vitrified tiles dark shade 10mm thick (square/rectangular) polished, area of each tile exc 0.18 sqm but not exceeding 0.36 sqm , in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 20 mm thick screed bed in CM 1:6 all as specified.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.

M & L Coloured glazed ceramic tiles 450 x350 x7 mm thick on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment

M&L for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Engineer-in-Charge.

S & F powder coated aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and locking arrangement etc complete all as specified and directed by Engineer-in-Charge.

S&F aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples alu shutters complete all as specified and directed by Engineer-in-Charge.

S&F 4 mm thick figured glass pin headed type and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

M&L aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (80 x 66mm aperture) all complete.

Taking down shutter of any description exc 1 sqm and n exc 2 sq. m each complete all as specified and directed by Engineer-in-Charge.

S & F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

M&L for Preparation of new or previously untreated surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of pink primer and two coat of synthetic enamel paint, complete all as specified and as directed by EIC.

Supply and fix stainless steel butt hinges of size 100mm, complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm size of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

S & F extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed.

S & F extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

S&F for machine cut kota stone slab single piece length as in jambs/cills of windows 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing (Note : kota stone single pice of Cill will be fixed in two steps) complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge,such as in steps,cooking plateform,and other similar situations

Taking down cement plaster of any description including racking out joints hacking for key scrubbing down with water in patches n.exc. 4 Sqm each.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of bricks work or concrete finished even and smooth without using extra cement.

M&L for 05 mm thick plastering in CM 1:3 on concrete surface on ceiling finished even and smooth all specified & as directed.

M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge.

Supply only integral water proofing compound of approved ISI make.

M&L preparation of new decorated surfaces of wall and applying two coats of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge.

M&L applying two coats of Oil bound distemper over a coat of primer including wall care putty to wall incl preparation newly plastered surfaces.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

Complete removal of existing treatment, Preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces with alkali-resistant priming paint and one coat of wall care putty all over the surface and two coats of distemper oil emulsion, white or tinted on walls

M&L preparation of old decorated surfaces of wall including washing and applying one coat of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge.

M&L for preparing of old painted concrete or plastered surface of any description described and applying one coat of acrylic OBD over a coat of primer complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

M&L for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC.

S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter, with wooden beading (any size) with aluminium wire staples and removing old beading, complete all as specified and directed.

T/d alu windows/vent & refixed in repairs with proper seal adhesive after easing, tighten & proper fixing of loose fittings i.e. Screws, handles, hinges, T/bolt replacing damaged glass , wiremesh aluminium sections etc all as specified and directed.( Alu section, wiremesh,glass shall be msrd and paid seperately)

M&L for mirror polishing on existing Kota/Marble stone floors fixed in any position of any description all complete as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Excavating in post holes each n. exc 0.5 cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm watering ,and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil.

S&F steel work in tubular trusses /posts/purlins including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS -1161-1979 grade st -240 all as spd and directed

S & F rolled mild steel sections such as channel, angle or tee section. MS plate etc confiming to Gde fe 410 as in post hip and jack rafter brackets, rafters, railing and purlins including necessary welding etc. complete all as specified and directed by Engineer-in-charge

S&F including fabrication framed work in MS iron such as grills, gratings gate fencing , etc with end of bars shouldered and/ or riveted or bolted with nuts and bolts framework confirming to Fe.290. Gde-E-165 complete all as specified and directed.

Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-charge

Supply and Fixing in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as in roof covering/claddig to wall, fixed with self tapping screws,

M&L preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth complete all as specified and directed.

Demolition Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles in cement mortar.

M&L brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4

M&L for Cement concrete type B-1 1:2:4 ( 20 mm graded stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, , coping etc concrete complete all as specified and directd.

M&L rendering 15mm thick on fair faces of brick work or concrete in CM 1:4 finished even and smooth without extra cement.

Demolition of cement concrete (unreinforced) in ground floors & paving not exceeding 15 cm thick below & above Ground level complete all as specified & directed by Engineer in charge

Dismantling stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc.complete all as specified and directed.

M & L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green all as directed .

Material and labour, forming construction joints of width 10mm & depth 25mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.

Material and labour, forming contraction joints (dummy joints) of width 10mm & depth 35mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushioning complete (Note : Sand cushioning shall be measured and paid separetely).

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushioning complete (Note : Sand cushioning shall be measured and paid separetely).

M&L for Sand filling under floors or in foundation including watering and consolidation all complete.

M&L machine cut Kota stone ( greenish colour, mirror polished) slab flooring 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing completly with 20mm thick screed bed in CM 1:4 complete all as specified.

M&L granite (of any type) slab 18 to 20mmthick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for kitchen plateform/gate pillars including 20 mm thick screed bed in CM 1:4 etc.

S & F Precast plain cement concrete prepolished coloured chequerd floor tiles 300 x 300 x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed.) Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)

S & F rough finished Precast plain cement concrete vitrified digital paver tiles 400x 400 x 8 to 12 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed.) Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)

M & L screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying tiles all as specified.

M&L cleaning the existing surfaces of chequered tiles/paver blocks with wire brush and keeping all dirt /dust away and applying two coats of floor guard paint

M&L anodised aluminium sheeting 22 gauge thick fixed in repairs as in crumple section.

M & L for applying two coats of water proofing coating system by applying shalicry - 215 of STP ltd/Rain coat 601 of Dr Fixit/Barrier coat of Araldite Ltd. over a coat of respective primer including prepariation of old plastered surfaces or complete removal of existing treatment filling up of all cracks with approved crack fillers all as specified and directed

Removing demolished/excavated materials and debris laid at Navy Nagar outside MD land . (Note : for item No 1 to 70 work to be carried out upto and inculding G+14th floor).

RAMESH ENTERPRISES

M/s. MAYUR ENTERPRISES

IDEAL CONSTRUCTION COMPANY

S S ENTERPRISES

BOB ENTERPRISES

SHREE JAGDISH FURNITURE CO.

RS Enterprises

AGRAWAL ASSOCIATES