RequiredOEM Authorization Certificate Bid to RA enabled Yes T – Shirt ( 52 pieces ) ( Under PAC ) Make sportsun Model kit-01 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) UTILITY Utility Unisex * DIMENSIONS Size Large (L) Large (L) Length of T Shirt (cm) 78 ( Extra Large ) * Width Across Chest (cm) 55 ( Large ) * Sleeve Length (cm) 25 ( Large
RequiredHalf Sleeve * 1/5 ) Depth of hemming/binding at neckline
Requiredsleeve end and bottom binding 2.5 cm * MATERIAL Material ( composition ) 100% Polyester 100% Polyester Mass of Material (g m²) 160 160.0 Knitting Interlock knitted Interlock knitted Count of Yarn (Ne) NA * pH value of aqueous extract 6.0 to 8.0 ( Hot Method
Requiredas per IS: 1390 ) * Neck Binding/Collar Rib Knitted Fabric ( 1 X 1 Rib ) * Bottom Hem ( Bottom Binding ) Rib Knitted Fabric ( 1 X 1 Rib ) * Sleeve end Binding Rib Knitted Fabric ( 1 X 1 Rib ) * Lining With Lining With Lining Lining Material 100% Polyester Mesh * Mass of Lining (Gram per Square Meter) 50 * Netting mesh No of holes on base & bias within 625 Square millimeter Not Applicable * Colour of Mesh Lining Any other colour as per buyer's requirements * PATTERN Neck Type Polo Neck Polo Neck Sleeve Type Raglan * Sleeve Half Sleeve Half Sleeve Number of Buttons in T Shirt with Collar Not applicable * Side Slit With * Depth of side slit ( in case of T Shirt with Side Slit) (cm) 5cm * Pocket Without Pocket Without Pocket Size and position of pocket ( in case of T Shirt with Pocket ) ( Width X depth ) Not applicable * STITCHING Sewing Thread 145 d tex X 3
RequiredPolyester * 2/5 Raw edges
Requiredif any shall be bound by overlock stitching Yes * Stitches per dm ( min ) 36 * COLOUR Colour As per buyer's requirements As per buyer's requirements COLOURFASTNESS OF FABRIC AND DEPARTMENTAL LOGO Colourfastness to Washing [IS/ISO 105-C10
RequiredTest- C (3)] Change in Colour – 4; Staining of Adjacent Fabric – 4 * Colourfastness to perspiration ( IS 971 ) 4 * Colourfastness to Rubbing ( IS 766) Dry – 4/Wet – 3 * Colourfastness to Light ( IS 2454 ) 5 * Colour fastness – Potential to phenolic yellowing of fabric 4 ( Test method – ISO 105-X18:2007
RequiredLatest) * Colourfastness to Washing ( IS/ISO 105-C10
RequiredTest- C (3))- Mesh Lining Change in Colour- 4; Staining of Adjacent Fabric- 4 * Colourfastness to perspiration ( IS 971 )- Mesh Lining 4 * OTHER REQUIREMENTS Pilling Resistant [after 5 hours Test as per IS 10971 (Part 1)]
Requiredmin 4 * Dimensional stability to washing
RequiredShrinkage or Elongation Percentage
Requiredmax ( IS 2977 latest)
Requiredin lengthwise and width wise direction 3 * Spirality
Requiredpercentage
RequiredEnumerable +/- 4 N/A Mandatory max ( After one wash ) ( IS/ISO 16322-1:2005 ) ( Washing as per ISO 6330- 2A at 60 degree C ±4 * Label with Tag * LOGO AND MARKING Logo Marking As per buyer's requirements As per buyer's requirements Type of Logo Printed * Embroidery Thread for Logo Polyester * 3/5 TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes * Name of the Lab ITL LABS PVT LTD * Address of The Lab MANGOLPURI DELHI * Test Report No. M201903090027 * Test Report Date 04/04/2019 * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Yes * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply Yes Yes * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
