PERIODICAL SERVICES TO MD/OTM ACCN AT CABS, INS TANAJI, NOFRA AND NSB UNDER GE (NW) MANKHURD

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scrubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed

M&L for rendering 15mm thick on fair faces of bricks or concrete surface work in CM 1:6, finished the surfaces even & smooth with sagol finish etc. complete all as specified and as directed

M& L rendering 5 mm thick in CM 1:3 on ceiling surface finished even & smooth with sagol finish etc. complete all as specified and as directed

M&L for Ready mix plaster 20mm thick (12+8mm) on fair faces of bricks or concrete surface including necessary scaffolding upto 24m height etc. complete all as specified and as directed

Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, even including necessary scaffolding up to 24 m height etc. complete all as specified and as directed Note: Hard concrete shall not be removed by force.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application even including necessary scaffolding up to 24 m height etc. complete all as specified and as directed.

M&L for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats etc. complete all as specified and as directed. Note : Mode of measurement: superficial area of concrete will be measured.

M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed. Note:- Mode of measurement: superficial area of concrete will be measured.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still sticking upto 20mm thickness including levelling, profiling etc even including necessary scaffolding up to 24 m height etc. complete all as specified and as directed

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Monolith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still sticking upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm,even including necessary scaffolding up to 24 m height, etc. complete all as specified and as directed

Supply only water proofing compound etc. complete all as specified and as directed

M&L for preparation of newly plastered surfaces of celings and applying three coats of white wash etc. complete all as specified and as directed

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of new surfaces and necessary scafolding etc. complete all as specified and as directed. Note : The contractor shall clean the window panes including splashes of paint etc and the quoted rate is deemed to be included for the same.

M&L for preparing new plastered surface of walls, and applying two coat of Distemper oil emulsion over & including a coat of putty 3mm thick etc. complete all as specified and as directed

M&LPreparation of old plastered or un-plastered surface of wall and applying one coat of white wash etc. complete all as specified and as directed

M&L Preparation of old plastered or un-plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L Preparation of old plastered or un-plastered surface of wall and applying two coat of distemper oil-emulsion of white or tinted and over & including a coat of putty 3mm thick etc. complete all as specified and as directed

M& L for preparing old surfaces walls of distempered & painted surfaces and applying one coat of oil bound distemper etc. complete all as specified and as directed

Material & Labour for applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including preparation of old surfaces and necessary scafolding etc. complete all as specified and as directed

M & L for complete removal of existing treatment and applying one coat of exterior cement based water proofing putty and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over old surfaces including necessary scafolding etc complete all as speicified and directed. Note : The contractor shall clean the window panes including splashes of paint etc and the quoted rate is deemed to be included for the same.

M& L preparation of old painted wooden surface of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint etc. complete all as specified and as directed

All as per item No 21.00 above but on steel surfaces etc. complete all as specified and as directed

M&L for preparation of existing old surfaces of wall, chajjas, beams, parapets etc, filling of cracks after cutting the same to V shape approximate 10mm wide and upto full depth of cracks with Chemistic crack seal caulking compound (Acrylic sealant) of M/s. Chemistik or equivalent of Dr. Fixit or of M/S STP Ltd as approved by the GE, also including necessary scaffoldings etc. complete all as specified and as directed

M&L for leak/seapage proof coating consisting of preparing the surfaces of Newly plastered or existing exterior walls, parapet walls chajjas etc, with wire brush to remove all loose dirt, oil grease etc, and filling cracks above 5mm thickness with Dr Fixit Pidicrete URP or with plaster seal of STP Ltd and cracks less than 5mm with Dr Fixit Crack X powder or with plaster seal of STP Ltd and applying one coat Dr Fixit primeseal primer or STP Ltd (and allow to dry for 8 hrs) under torch dry condition and subsequently two coats of water proof decorative elastomeric coating system; of Dr Fixit Raincoat with DFT 100 microns or shalicry 215 of STP(The surface after painting one coat shall be allowed to dry at 6 hours before next coat) etc, complete all as per manufacturer instruction etc. complete all as specified and as directed

Dismantling cast iron water pipes (pvc) (any size or pattern ) including all fittings, balance under credit ( measure overall as fixed along the centre line over fitting and accessories ) etc. complete all as specified and as directed

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls etc. complete all as specified and as directed

All as per item No 26.00 above but 75mm bore etc. complete all as specified and as directed

S&F 110mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal etc. complete all as specified and as directed

S&F 110mm bore PVC (SWR) bend etc. complete all as specified and as directed

S&F 75mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal etc. complete all as specified and as directed

S&F 75mm bore PVC (SWR) bend etc. complete all as specified and as directed

Removing plant/growth including its roots upto 1.00m of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, etc. complete all as specified and as directed Note : A sum of Rs 1,400.00.00 towards sch of credit shall be deducted to arrive the contract sum