SPECIAL REPAIRS TO WINDOWS AND B/R WORKS ETC TO BLDG NO P-69 (OR MD ACCN) IN NML AREA UNDER GE (W) COLABA, MUMBAI

Amount

Taking down chowkhats with shutters (without taking off shutters from the frames) area nexc 1.5 sqm each including iron grills and all fitting and fixture all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) area exc 1.5 sqm but nexc 4 sqm including iron grills and all fitting and fixture all as specified and directed.

Taking down cement plaster on brick walls/ ceiling including racking out joints, hacking for key, scrubbing down with water and disposal of rubbish out side of the MD land all as specified and directed.

M&L Granite (of any type and size) 18-20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite laid over 15mm thick screed bed/backing coat in CM 1:4 on cill /jambs /ceiling of Window/Ventilator including rubbing, grinding and polishing all as specified and directed.

S&F Powder coated (of any shade approved by GE ) aluminium frame/shutter for window, ventilator of any type including sliding/hunge type all as directed with one or more rebates including fabrication of frame/shutters and fixing to wall with necessary lugs, cleat including all accessories such as glazing clips and rubber beading for fixing of glass panels, hinges locks all as specified and directed . (i) Glass panels/Wire cloth will be measured and paid seperately. (ii) The quoted rate shall be inclisive of cost of rubber beading, glazing clips and locking arrangement. (iii) Rate quoted shall also be includes filling of gap between frame and wall with silicon.

S&F sheet glass 4 mm thick ordinary quality in square n.exc 0.5 sqm in each pane and fixed with rubber beads all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm, fixed with stainless steel wire staples all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

Dismantaling wrought iron or mild steel work of any discription not otherwise provided all as directed by Engr-in-charge.

S&F hot rolled medium and high tensile structural steel of Fe-290(Gde E-165) as in traming for window chajja with angle cleats and connecting plates all as specified and as directed.

Dismantling plain or corrugated steel sheets in chajja coverings all as directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sun shades, chajja covering fixed with self tapping screws all as specified and as directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) in roof, kerbs or mud stop rounded or chamfered edges all as specified and as directed.

M&L for 15mm thick plastering in CM (1:4) on fair/unfair faces of brick work or concrete surfaces, finished surfaces fair and even all as specified and as directed.

M&L for 15mm thick plastering in CM (1:6) on fair/unfaired faces of brick work or concrete surfaces, finished surfaces fair and even all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of external walls plastered or unplastered and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 1549:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon addtives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of oil boud distempering over a coatof alkali resistant primer all as specified and directed.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar all as specified and directed. .

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius built in CM 1:6 all as specified & directed.

S&F stainless steel (Grade 304) railing made of hollow tubes,channels, plates, etc. including welding, grinding, buffing, polishing and making curvaure (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top floor or the side of waist slab with suitable arrengement all as specified & as directed.

SAHU AND SAHU CO. (BID ID -3222622)

Shivam Enterprises (BID ID -3223350)

sri construction (BID ID -3223642)

ASHOK CONSTRUCTION (BID ID -3223879)

Bright Construction Co (BID ID -3222581)

RUPESH CONSTRUCTION CO (BID ID -3223925)

HINDUSTAN BUILDERS (BID ID -3223674)

Unitech Enterprises (BID ID -3223168)

Shetty Construction Co (BID ID -3221303)

SRI SAIRAM COUNSTRUCTION (BID ID -3223660)

Anil Industrial Corporation (BID ID -3221798)

Mayur Enterprises (BID ID -3222554)

N.S.ENTERPRISES (BID ID -3220290)

GUPTA ENTERPRISES (BID ID -3222545)

Bidder Name

Unitech Enterprises

HINDUSTAN BUILDERS

Shetty Construction Co

SRI SAIRAM COUNSTRUCTION

ASHOK CONSTRUCTION

SAHU AND SAHU CO.

Anil Industrial Corporation

Mayur Enterprises

NATH CONSTRUCTION

Bright Construction Co

sri construction

RUPESH CONSTRUCTION CO

Shivam Enterprises

N.S.ENTERPRISES

GUPTA ENTERPRISES