REPAIRS TO PLASTER FLOORS TILING AND OTHER ASSOCIATED BR NATURE OF WORKS UNDER AGE BR I OF GE (W) AGRA

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) including removing of debris outside the MD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any position n.exc 15cm thickness (below or above ground level), including removing of debris outside the MD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including removing of debris outside the MD land complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.00 kg of cement per sq. metre all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

M&L for brick work with sub class ‘B’ bricks old size (except brick), straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed. Note:- Bricks obtained from item No 5 shall be reused after cleaning.

Taking down cement or cement lime plaster of any discription on brick or stone walls / ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ manufacturer's instrs finished fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and fair without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces and applying two coats of cement base paint on wall over a coat of priming paint complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of average 1mm thick wall putty complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including rendering 10mm thick in CM 1:4 on brick wall complete all as specified and as directed .

M&L glazed ceramic non skid joint free coloured tiles (1st quality/ premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick screed bed or bedding layer of cment mortar (1:4) complete all as specified and directed.

M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.

M&L glazed ceramic non skid joint free coloured tiles (1st quality/ premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat of cment mortar (1:3) complete all as specified and directed.

M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqm as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat of cment mortar (1:4) complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.38 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM ( 1:6) complete all as specified and as directed.

M& L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.38 sqm, in vertical surface etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster in CM (1:4) complete all as specified and as directed.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set & jointed in neat cement slurry and pointed with grey cement & pigment in floors laid over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection ( 75 mm thick ) laying in alternate ways finished even and fair without using extra cement all as specified.

M&L for PCC 1:2:4, type- B-2 (using 40 mm graded crushed stone aggregate) as in floors/paving/ path (75 mm thick) laying in alternate ways finished even and fair without using extra cement all as specified and as directed.

S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repair 15 mm bore CP angle/stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe or for union bore of pipe 15mm (min wt 90 gms), all as specified and directed.

S & F in repairs swivel shower rose of PTMT any colour for fixing with 15 mm pipe (Min wt 40 gms) all as specified & as directed.

S&F in repairs stop valve of PTMT any colour high pressure screwed for iron pipe or for union bore of pipe 15mm (min wt 90 gms) all as specified and directed.

S&F in repairs angle stop valve of PTMT any colour high pressure screwed for iron pipe or for union bore of pipe 15mm (min wt 90 gms), all as specified and directed.

S&F in repairs 15mm concealed stop cock, chromium plated fancy type with long shank and cup complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4, Type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

Refixing old steel water tubing 15mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.

Refixing old steel water tubing 20 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc. brick walls complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan pedestal pattern white (excluding fixng bolt flushing cistern and flush pipe) complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F fix in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mils steel chromium plated or aluminium hinging devices complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, 450 mm long complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste pipe, chain plug but including brackets, waste coupling of PTMT 32mm and 15 mm PTMT pillar cock complete all as specified and directed.

Removal & fixing only vitreous china wash basin (flat back or angle back type) any size incl cutting for and pinning in ends of brackets or erecting stand but excl of fixing of supply and waste pipe complete all as specified and directed. .

S&F in repair 15mm bore, brass chromium plated pillar cock fancy type screwed down for pipe and fixed complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms / 40mm-60 gms) of 32mm bore suitable for wash hand basin/kitchen sink complete all as specified and directed.

S&F 32 mm dia PVC waste pipe for wash basin /sinks 800mm long complete all as specified and directed. Make Prayag Cat No 327 or equivalent approved

S&F in repairs kitchen sink made of stainless steel 1mm thick with plugs, washers and waste pipe incl bedding in CM 1:4 on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.

S & F in repairs swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 150 mm square PTMT grating with openable flap (Min weight 100 gms) complete all as specified and directed.

S&F in repair PVC cabinet mirror assy 500x400mm size complete all as specified and directed. make Prayag Cat No 556

S&F in repair PVC Jet spray 15mm bore suitable for EWC complete all as specified and directed. Make Prayag Cat Part No 521

S&F in repair chromium plated PVC health faucet 15mm bore complete all as specified and directed. Make Prayag Cat Part No 456

S&F in repair wall mixer with provn for OHS complete all as specified and directed. Make Prayag Cat No 9975 or equivalent

S&F in repair central hole basin mixer without popup waste system with 450mm long flexible hose complete all as specified and directed. Make: Prayag Cat No 8750 or equivalent

M & L in repairs 19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L Machine cut kota stone 20-25 mm thick as in floor, stair case, landing etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and mirror polishing over 20mm thick screed bed in CM ( 1:6) as in floor complete all as specified and directed.

M&L Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick rendering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm area fixed on walls/pillars incl 10 mm thick rendering as bed or bedding layer in CM (1:4), with and including one number SS clamps (grade-202) of flat 30mm x 2mm, 150 mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed.

M&L Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm and not exceeding 0.5 sqm area fixed on walls/pillars incl 10 mm thick rendering as bed or bedding layer in CM (1:3) with and including one number SS clamps (grade-202) of flat 30mm x 2mm, 150 mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in clause No. 8B.2 at Sl page No. 143 to 144 and shown in drawing on sl page No 156 of SSR 2010 respectively and as directed

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled stainless steel Butt hinges complete all as specified and directed.

S & F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed.

S & F Mild steel work in framed work such as grills, gratings, guard bars etc, with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 410 - O or Fe 310 - O complete all as specified & directed.

S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

M & L for preparation of new steel surface over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of new steel surface of any description, n.exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

N.K. ENTERPRISES

Om shri sain ram enterprises

Messars Maa Devi Construction Co.