Block Babina ke gram Khailar main Pracheen mandir Guda sarkar ki aur jane wali neher patri par sadak ka nav nirman karya

Earth work in cutting or in embankment in moorum mixed soil (in Bundelkhand areas, requiring use of special T&P such as pick axes and sabbals etc.) excavation to be in the form of regular pits not exceeding 1/2 meter (20'') in depth including rammaing and dressing the surface to required, lavels and slopes and also including 1.5 m. (5ft), lifts and 30 m. (100ft) lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within two km. distance including cost of royalty as directed by Engineer-in-charge

Construction of granular sub base by providing well graded material, spriding in uniform layers with motor grader on prepared surface mixing by mix in place method with roatvetor at OMC .and compacting with smooth wheel roaller to achieve the desiersd density, complet as per technical specification Clause 400.1

Providing, laying spreading and compacting stone aggregates of specific sizes to water bound macadom specification including spreading in uniform thickness hand packing, rolling with smooth wheel roller 80 - 100 KN in stages to proper grade and camber, apploying and brooming, stone screening to fillup the interstices of coarse aggregate, watering and compacting to the required density .Grading 3 as per technical specification class 405

Construction of un-reinforce,and Expansion joint construction joints only pcc pavement thickness as per design over a prepared subbase, with 43 grade cement or any other type as clause 1501.2.2 m-30 grade coarse and fine aggregate confirming to is 383 maximum size of coarse aggregate not exeding 25 mm mixed in a concrete mixer of not less than 0.20 cum capacity and appropriate weigh batcher using approved mix design laid in approved fixed side formwork and fixing of 125 micron polytheen film including the levelling the formwork as per drawing spreading the concrete with shovel, rakes, compacting using needle, screed and plate vibraters and finished in continious operation including provision of contraction and expansion joints applying primer and curing compound and water finishing to lines and grade as per drawing and technical specification clause 1501.

Supply and fixing of sign board including painting and lettering as directed by Engineer-in-charge.