Master Sewerage Scheme Faridabad - Repair/ rehabilitation of IPS Sec-29 of Badshahpur Zone, Faridabad.

Amount

Supply installation testing and commissioning of Pressure/Vacuum Gauge (-760 mmHG to 0) Bourdon Type SS Body 4 Inch Bottom Connection Glycerin Filled

Supply installation testing and commissioning of 25A Phase Corrector for Transformer

Supply installation testing and commissioning of 10 Sqmm Aluminium 4 core armoured Cable.

Supply installation testing and commissioning of 70 watt LED street light (70Wattage, 5700k CCT) , Product dimension in mm (362x232x72)

Supply installation testing and commissioning of LED Post top 20watt street light (20Wattage, 5700k CCT) , Product dimension in mm (330x330x405)

Supply and erection of DN 600 PN 10 Electromagnetic flowmeter (600mm) for sewage water Technical Specifications for Electromagnetic Flowmeter Process Data Fluid : Sewage Water Operating Pressure : Please Specify Operating Temperature : 50 Deg. C. Electromagnetic Flow Sensor Model : Optiflux 2000 Type : Pulsed DC Meter size : Refer table below Flow tube : SS 304 Coil housing : Fully welded Sheet Steel, PU coated Liner : Hard Rubber Electrodes : SS 316 Grounding type : Rings Grounding ring material : SS 316 Process connection : Flanged to DIN PN10 (fully welded) Flanges : CS, SORF Area classification : Non-Hazardous Cable entry : M20 x 1.5 Protection class : IP 67 Electromagnetic Signal Converter Model : IFC 100 Cable length : 20 Meters. Mounting : Remote wall mounted Output : 4-20mA, HART plus Pulse/Frequency plus Status Accuracy : ± 0.5% of measured value Display : Large back lit LCD Display, fully programmable Parameters : Actual flow rate, totalized flow (10 digit), flow direction, flow velocity, conductivity, mass flow rate (at constant density) Diagnostics : Empty pipe detection, Electrode error, Noise, Coil temperature, Coil resistance, Conductivity etc Power supply : 85-250VAC, 48-63Hz Housing : Die cast Aluminium with PU finish Cable entry : M20 x 1.5 Area classification : Non-Hazardous Protection class : IP 67 Accessories : NA

Supply installation testing and commissioning of Horizontal dewatering motor Pump set of 2.5HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of mechanical coarse bar screen CW: 1500 mm CD: 8000 mm WD: 1500 mm Bar Spacing: 20 mm Bar Size: 10x50 mm Inclination: 75degree MOC: SS-304 alongwith Panel and Sensor for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of SS body control Panel for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of Belt Conveyor for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply Installation Testing and Commissioning of rising spindle flush bottom CI Sluice Gate size(1000mmx1000mm) generally conform to IS:133-19 material detail 1 Frame, door, guide, extension, wedge, wall thimble, floor standard. CI. to IS 210 Gr. Fg 260 2 Spindle SS: 304 3 Seating faces SS :304/SSCF8 4 Wedge Block DI with SS AISI: 304/CF8 Lining 5 Lift Nut High ternide brass(HT2) 6Fastner (Thimble/Adjustable wedge) Stainless steel 7. Other fastners Carbon steel 8 Extension spindle SS: 304 9 Guide bracket CI to IS.210 Gr. Fg.260 10. Coupling SS AISI: 304 for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Enginee- in-Charge complete in all respect.

Supply Installation Testing and Commissioning of rising spindle flush bottom CI Sluice Gate size(500mmx500mm) generally conform to IS:133-19 material detail 1 Frame, door, guide, extension, wedge, wall thimble, floor standard. CI. to IS 210 Gr. Fg 260 2 Spindle SS: 304 3 Seating faces SS :304/SSCF8 4 Wedge Block DI with SS AISI: 304/CF8 Lining 5 Lift Nut High ternide brass(HT2) 6Fastner (Thimble/Adjustable wedge) Stainless steel 7. Other fastners Carbon steel 8 Extension spindle SS: 304 9 Guide bracket CI to IS.210 Gr. Fg.260 10. Coupling SS AISI: 304 for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply installation testing and commissioning of energy efficient 200W Lamps including fittings on High Mast complete in all respects (6 for High mast and 4 on building)flood light (200Wattage, 5700k CCT) , Product dimension in mm (350x285x85) for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Engineer- in-Charge complete in all respect.

Supply of Safety Equipment`s like gloves 2 pair, Fire extinguisher (min. 5), rubber mat (05meter) etc.

Supply installation testing and commissioning of Non Clog HORIZONTAL PUMPS of 725cum/hr@20m of 100HP for sewer disposal/ Intermediate Pumping Station Approved make as per satisfaction of Enginee- in-Charge complete in all respect.

Nicking cement concrete surface (over 28 days old including preparation and laying slurry) in sewer sumpwell including loading ,unloading and carriage of material lead within 5 KM

Bidder Name

Amount

M/s Shree Jee Enterprises(GSTN-NA)--1033218

Anil Dahiya Contractor(GSTN-NA)--1032195

M/s Shree Jee Enterprises

M/s Shree Jee Enterprises