Dhani Bhakran Upgradation of water works laying of distribution pipe line and providing FHTC under JJM Category II in village Dhani Bhakran

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Clear water pump set (At W/W ) 1000 LPM, 45 mtrs head

Supply, erection, testing and commissioning Wall mounted (B) Raw water pump set (At W/W ) 1000 LPM 12 mtrs head

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pumpset 1000LPM 45 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 1000 LPM x 45 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over switch 63 amp 1No.

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- for clear water pumpset 1000LPM 12 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 1000 LPM x 12 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over switch 63 amp 1No.

Supply and fixing following CI D/F pipe and sluice valves /non return valves/ bell mouth/Reflex valves including cost of Jointing materials, laying, jointing, refilling including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank up-to the rising main laid by the deptt. as per plan shown from the fundation well of pump chamber for all raw water and clear water pumping set at w/w in position as per specification given in schedule No.II B) CI D/F pipes 250mm i/d

B) CI D/F pipes 150mm i/d

Design & construction of automated PLC with SCADA controlled water purification plant of 0.50 MLD capacity at Water Works Dhani Bhakhra including remote terminal units (RTU’s) for raw water Pumping station & MBS synchronization with SCADA of water works, comprising of interconnecting DI pipe from raw water pump to inlet box of WTP, CWT & Suction Well for CW , inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed with automation complete in all respects as per NIT (Sluice valves of make IVC/VAG)

Supply erection testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 mm complete in all respects with accessories like thimble etc.

Providing and fixing of complete floating arm and floating drum fabricate of GI sheet of 16 guage with M.S. bolts made of M.S. flat and C.I. flange welded on it with coller one side and other side wire mash welded to prevent foreign elements to enter in floating arm fixed with CI swall bend with C.I. base plate fixed with anchor bolts in water tank haudi 8" i/d Floating arm complete in all respect as per specification of Engineer-In-Charge

Supply erection , testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch , button , plug, PVC conduict pipe & copper wire etc. as per approved specifications.

Providing & fixing celling fan 1400 mm 56" with speed adjuster make (make crompton, usha, Bajaj) complete in respect.

Bidder Name

Amount

Ashok Kumar Contractor(GSTN-NA)