Loading…
Loading…
Tender Value
₹25 L
Closing Date
28 Jul 2026, 5:00 pm2d left
ADD CEO ZP YAVATMAL
EXECUTIVE ENGINEER ZP WORK DIV 2 ZP YAVATMAL
IMPROVEMENT OF SHIRFULI TO SHIRMAL ROAD (V.R. 141) TOTAL LENGTH 5/00KM IN PART 0/00 TO 2/00 AND C.D .WORK , TQ.- MAHAGAON, DIST.- YAVATMAL
2026_YAVAT_1317842_1
NIT06C/2026-27
Open Tender
Civil Works
Percentage
180 days
MAHAGAON
Please refer Tender documents.
2 documents required · 2 mandatory
₹560
Exempted
14 Jul 2026
14 Jul 2026
29 Jul 2026
14 Jul 2026
28 Jul 2026
14 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By /manaual Means ) | 376.54 | Cubic Metre | 239 | ₹89,993.06 |
| 2 | Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate | 5.98 | Cubic Metre | 241 | ₹1,441.18 |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. | 1 | Cubic Metre | 1,899.9 | ₹1,898 |
| 4 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in- charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. | 71.68 | Cubic Metre | 4,800.25 | ₹3,44,081.92 |
| 5 | Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite
/gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications ( Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) | 37.58 | Cubic Meter | 8,204.25 | ₹3,08,315.71 |
| 6 | Providing cast in situ / ready mix block of M10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications ( Natural sand / VSI sand finely washed etc ), cement 4.40 bags/cumt) | 0.2 | Cubic Meter | 9,353.65 | ₹1,869.79 |
| 7 | Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with
SCADA | 79.26 | Cubic Meter | 10,767.4 | ₹8,53,424.12 |
| 8 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and
curing etc. complete. | 15 | Running Metre | 2,733 | ₹40,995 |
| 9 | Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. | - | Cubic Meter | 912.2 | - |
| 10 | Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. | 0.2 | Metric Tonne | 88,689.1 | ₹17,728.95 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.14 MB
BOQ_2259021.xls
BOQ • 0.24 MB
SBD1.pdf
Tender Documents • 1.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].