Rajkiye Mudhralaya Ramnagar Varanasi ke karyalay parisar me aantarik marg ke punah nirman ka karya

Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. (Including all taxes but excluding GST)

Construction of Earthen Shoulders with approved material obtained from availble land as permitted and approved by Engineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1, with all lifts and leads, 2 spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 (Carted Earth) (Including all taxes but excluding GST)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth MORD specificaions 401 (Including all taxes but excluding GST)

Providing, laying, spreading and compacting of sukrut stone stone aggregates of specific sizes to water bound macadam specification (G-2) including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, MORD specifications 405.2 (Including all taxes but excluding GST)

Providing, laying, spreading and compacting of sukrut stone aggregates of specific sizes to water bound macadam specification (G-3) including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN In stages to proper grade and camber, MORD specifications 405.3 (Including all taxes but excluding GST)

Brick edging on both side of road with first class brick 8 cm. (3") wide 12 cm. (4.50") deep laid with mud mortar 6 including all materials, lab our, T & P etc. complete. (Including all taxes but excluding GST)

Providing and applying primer coat with bitumen emulsion (55) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means as per Technical Specification Clause 502 (Including all taxes but excluding GST)

Providing and applying tack coat with Bitumen (VG-10) using distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. (Including all taxes but excluding GST)

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm-11.2 mm aggregates using penetration grade bitumen to 9 required line, grade and level to serve as wearing course 35 on a previously prepared base, by manual MORD specific. 508 (Including all taxes but excluding GST)

Providing and laying seal coat sealing the volds in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification 35 Clause 510 (Including all taxes but excluding GST)