Pdg. Special Repair to E.I. in Hostel Building of State Health Family Welfare Training Centre Building Rohtak.

Amount

HSR Items

Ceiling Fan / Exhaust Fan

20.71 Supply, Erection, Testing of Ceiling Fan IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-Charge

23.5 COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED

23.5.1 Wiring only in 1.5 sqmm PVC insulated copper conductor cable for LIGHT/FAN/Call bell point in existing conduit pipe and MS boxes including cost of Bakelite cover for MS box, switch, wall socket, ceiling rose/connector etc.

23.5.1.2 Group B

23.5.4 Wiring only in existing conduit and MS box for 3-pin 5 amp. Plug point by using 2 no. 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire including providing 1 no 5/6 Amp 3/5 pin socket and 1 no. 5/6 Amp Switch etc. complete as required

23.5.4.2 Group B

23.5.5 Wiring only in existing conduit system for 3-pin 15 amp. Plug point by using 2 no. 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthing including providing 1 no 15/16 Amp 3/6 pin socket and 1 no. 15/16 Amp Switch etc. complete as required

23.5.5.2 Group B

23.5.6 Wiring mains and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated copper conductor cable 1100 volts grade in existing MS/PVC Conduit etc. as required

23.5.6.1 1 run of Size 1.50 Sqmm (1/1.40mm)

23.5.6.3 1 run of Size 4 Sqmm (1/2.24mm)

23.7 PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL

23.7.6 Supply and Erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work

23.7.6.2 PVC Pipe of 25 mm dia.

23.8.1 Providing and fixing piano type accessories of approved make in existiong box and bekelite sheet including fixing and making necessary connections complete in all respect

23.8.1.12 Bakelite angle/straight button holder large size

23.22 MCCB, Distribution Boards, MCB's, RCCB's, Change Over etc.

23.22.4 Supply and erection of double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.

23.22.4.7 TPN DB Horizontal type Double Door 8 way (8 incoming and 3 phase * 8 outgoing)

23.22.5 Supply and erection of miniature circuit breaker 240/ 415 V in the existing distribution board including making necessary connections

23.22.5.1 6 Amp. to 32 Amp. Single Pole

23.22.5.8 40 Amp. to 63 Amp. MCB's FOUR Pole

23.24 MS STAND, BUS BAR CHAMBER AND PANELS

23.24.3 Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S. sheet and fixing with rag bolts on wall or on existing pedestal/angle iron frame including bonding, detachable top and bottom including painting and necessary connection etc. (Aluminium bars)

23.24.3.3 100 amp 4 bars of 100 cm each (cross section 25 mm x 6 mm ) chamber overall size 1.10 m 45 cm x 18 cm

24.1 Earthing and Lightening Arrestor

24.1.3 Earthing with GI earth Plate 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or cake and salt) complete as required

24.1.5 Extra for using salt and charcoal / coke for G.I. Plate or copper plate earth electrode.

24.1.7 Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia GI pipe as/from earth earth electrode including soldering etc. as required

24.1.8 Supplying and laying 25mm x 3 mm G.I. strip on surface or in recess for connections etc. as required with all labour and material

24.4.3 Supply and erection of 32 mm dia metre 1.5 m long bracket (B-Class) making an angle of 10 degree to 15 dgree with horizontal plane for mounting street light fitting fixing of G.I. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting , welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connection

M.R. Items

NS-1 S/E of underground cable loose in existing pipe or trenches complete in all respect upto the entire satisfation of Engineer-in-Charge of the work.

i) 10 Sqmm 4 core Cable (Armd.)

ii) 25 Sqmm 4 core Cable (Armd.)

iii) 35 Sqmm 4 core Cable (Armd.)

N.S - 2 Supply and Erection of LED street light lumanaries of Havells make Endura PLEARL NEOSL 60W LED or its equivalent model and specifications of Bajaj/Wipro/Phillips make with die cast housing, toughened glass IP66 with all acessories as supplied by the manufacturer with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work.

N.S - 3 Supply & Erection of MS Sadles and clamp on wall/RCC parapit for fixing undergoing cable at distance of 0.60 metre centre to centre fixed by means of Rawl plug including the cost of labour and petty material etc. complete in all respect up to the entire satisfaction of Engineer-in charge of the work. (Based on HSR)

DEVENDER KUMAR CONTRACTOR

Balraj Singh Contractor