WELCOME MAINTENANCE OF OFFICER MD ACCN AND CERTAIN REPAIRS TO OPEN STROM DRAINS INCLUDING MISC REPAIRS UNDER AGE BR-II OF GE NAGROTA.

Amount

Preparation of old surfaces incl brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil , greasy spots etc and applying one coat of white wash on walls after filling any hole with putty complete all as specified and directed by Engineer-in-charge.

All as per srl item No 1.00 here in before but applying one coat of white wash on ceiling.

M & L for preparation of old plastered or unplastered surface of wall and applying 1 to 2 mm thick wall putty and applying two coats of oil emulsion distemper upto three storey, complete all as specified and directed.

M & L for preparation of old plastered or unplastered surface of wall and applying one coats of oil emulsion distemper upto three storey, complete all as specified and directed.

Preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for non skid ceramic coloured tiles 400x 400 x 7 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or beddding layer of CM 1:6, complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 450x300x7mm thick as in vertical surface, dado/skirting, over and including 10 mm thick screed bed in CM 1:4 , complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles exceeding 0.18 sqm but n. exc 0.36 Sqm as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and including 15 mm thick screed bed in cement mortar 1:4 , complete all as specified and directed.

Taking down shutters any discription exc 1 sqm each and n. exc. 2.00 sqm each and refixing in same opening, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each and n. exc. 4.00 sqm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sqm each and removing from site complete all as specified and directed.

Taking down shutters any discription exc 1 sqm each and n. exc. 2.00 sqm each , complete all as specified and directed.

S&F pressed steel frames factory made for doors with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105 x 60mm complete all as specified and directed.

S & F 40 mm thick second class hard wood factory made plain, framed, panelled shutters any numbers of panels) with pannels of timber flat on both sides (Feather edged) or of veneered particles board medium density, wood particles board with commercial face veneers, fitted to chowkhats, complete all as specified and directed.

S & F 35 mm thick second class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

S&F Box type Steel windows/ventiletors , including hinges, steel handle, tower bolt 100 mm and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface two coat of synthetic enamel paint before fixing , complete all specified and directed and shown in drg No. CEUZ/TD/1518/18Sheet No.1/3 to 3/3.

Prepration of new wood or wooden based new or previously untreated surface of any description, over 10 cm width or gridth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples to all door/window/vent shutters, complete all as specified and directed.

S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S & F 150 mm aluminium handles cast type anodized, complete all as specified and directed.

S & F 300 mm long mild steel helical door springs including roller and roller plate complete and necessary welding required, complete all as specified and directed.

S & F 100 mm long hasp and staple aluminium anodized with steel hinge pin including bolt to hinge plate, complete all as specified and directed.

S&F in repair 20 to 25 mm dia CP curtain rods fixed on wall including funnels and brackets in any position complete all as specified and directed

S&F in repair 600mm long CP towel rail fixed with and including chromium plated brass screw, complete all as specified and directed

S&F in repair 1.00mm thick stainless steel sink for kitchen or laboratory with plug, waste pipe, washers including bedding in cement mortar on to dwarf wall or fixing cantilever cast iron brackets connecting union etc., over all size 915 mm x 460 mm x203 mm with bowl size 405 mm x 354 mm x 203 mm with waste coupling, complete all as specified and directed.

S&F in repair Stainless steel plate rack made out of 0.63mm thick sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden gutties complete all as specified and directed.

S&F in repairs shower rose 125mm, CP, with otr without swivel joints, any size including fixing to steel pipe or union,complete all as specified and directed.

S & F in repairs 10 Ltrs capacity PVC valveles, symphonic action type, flushing cistern low level, white with inlet, ball valve, float and handle including bracket , complete all as specified and directed.

S&F in repairs Vitreous china wash basin, white, flat back, size 550X400 mm with CP pillar tap and waste coupling, angle brackets, PVC connection 15 mm size, 450mm long, including waste pipe, complete all as specified and directed

S & F in repair 15 mm bore Brass CP non telephonic mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed

S & F in repair 15 mm bore Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed

S&F in repairs 15mm bore Bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs 20mm bore ball valves high pressure of PTMT (Minimum weight 210 gm) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F 500 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all accessories includind dismantling of old water storage tank, complete all as specified and directed.

S&F 1000 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all accessories includind dismantling of old water storage tank, complete all as specified and directed.

S&F in repair 15 mm bore stop/angle valve fancy type , cromimum plated with long shank(concealed type) cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union, complete all as specified and directed.

S & F in repair 32 mm bore PVC waste pipe flexible including PVC waste coupling with minium length 800 mm, complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store, complete all as specified and directed.

M&L 15mm bore dia uPVC pipes of pressure rating 10 kgf/sqcm with all fittings (union, tee, socket, nipple, elbow) and fixing complete to walls, ceilings or in floors etc, connections 15 mm bore, complete all as specified and directed

M&L 20mm bore dia uPVC pipes of pressure rating 10 kgf/sqcm with all fittings (union, tee, socket, nipple, elbow) and fixing complete to walls, ceilings or in floors etc connections 20 mm bore, complete all as specified and directed

S&F in repair Hand Jet (Healthfuset) complete all as specified and directed.

S&F in repair Toilet paper holder chromium plated fixed, complete all as specified and directed.

Hacking out old glasses (any thickness, size, quality or description) from metal or wooden frame including punching or drilling out old glazing pins /spring clips or glazed putty or fixed with beads, complete all as specified and directed.

S & F 3.00 mm thick Sheet glass ordinary quality and glazing with oil putty fixed with bends glazing pins n exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repair soap dish of cast copper alloy, chromium plated (CP), complete all as specified and directed.

S&F in repair Glass Shelf 550mm x 100mm Size with stainless steel rail in two row, complete all as specified and directed.

S&F 300mm corner glass shelf (with bracket) , complete all as specified and directed.

M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over and including 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match, complete all as specified and directed.

Cleaning of water storage tank completely by removing all scale, dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint, tank of capacity ranging exc 250 ltrs but n. exc 500 ltrs, complete all as specified and directed.

Cleaning of water storage tank completely by removing all scale, dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint, tank of capacity ranging exc 250 ltrs but n. exc 1000 ltrs, complete all as specified and directed.

S&F in repair kitchen cabinets made out of PVC sheet board 19 mm thick including making drawers, partitions, shelves and PVC board on all sides with following specification and as directed by Engr-in Charge:- (a) 19 mm thick PVC solid flush board with 5 mm thick pre-laminated sheet fixed on one side , as kitchen cabinet. (b) Frame of size 50 mm x 47 mm. (c) Shutters having piano hinges and brass handle 75 mm long for each shutter. (d) Bottom back and sides of cabinet covered with 19mm thick PVC board with 5mm thick pre laminated sheet fixed on one side. (e) Drawers having one brass handle 75 mm and two long sliding rails for each drawers. (f) Cabinet must have one drawers supported of sliding rails. (g) Size of each cabinet shall not be exceeding 0.9m x 0.75M and 0.60 M depth . (h) Measurement will be considered only for front face i.e length & height & depth 0.50 m. Note: Measurement for purpose of unit payment shall be on exernal face for width x height (Considering frame).

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.

All as per srl item No.60 here in before but except bricks

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work, stone masonry or concrete surfaces in CM 1:4 on wall surface finished the surface even and smooth with out using extra cement complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for MH Cover, drain pipe bed, hard standing etc, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base etc, complete all as spd and directed

M & L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drains, complete all as specified and directed.

M&L extra forming fair finished drain or channel 30 cm inner girth in cemnt concrete , using extra cement, including forms, mould, mitred/stopped ends, complte all as specified and directed

M&L Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregate) as in coping, bed plates, kerbs and the like benching, including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified.

Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips qfuality conforing to Gd I, IS 432(part I) or Fe-410 S or Fe- 410-o complete all as specified.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in landing cover slabs for manholes, complete all as specified and directed.

M&L for walling of random rubble uncoursed well bonded,bedded and solidly hearted built in CM 1:6 compelte all as specified and directed.

All as per ser item No.71 here in above but except stone

Raised pointing to random or polygonal rubble uncoursed or brought upto courses in cement mortar 1:4 compelte all as specified and as directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for MH Cover etc, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 47,746.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/S MANISHA BUILDERS

Nitika electricals and engineers works

S R CONSTRUCTIONS

ASHWANI KUMAR KHAJURIA AND SONS