REJUVENATION OF MUDDAMGUNDI LIFT IRRIGATION SCHEME IN MANVI TALUKA OF RAICHUR DISTRICT

Rejuvenation of Muddamgundi Lift Irrigation Scheme in Manvi Taluka of Raichur District

Improvement to Existing Pumphouse : Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming th...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proof...

Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of nea...

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and laying in position Cement Concrete for all Sub structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/b...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

PUMPING MACHINERY : Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) hav...

Providing and fixing Wafer type single flange Butterfly valve conforming to relevant IS 13099/9991 EN GGG40/50 with latest amendments as detailed below of the following diameter and types with TP set ...

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420 /431 and spring shall be spring steel...

Providing erecting and commissioning MS Dismantling joint as per requirement and department's approved drawing and specifications, inculding machining and rubber rings and suitable for 16 kg/cm2 worki...

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specified...

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...

Hand Operated Circular or Rectangular Travelling Crane (Single Girder). Providing, erecting and commisioning single girder hand operated circular/ Rectangular Travelling crane with 6 m lift complete w...

Supplying, installing and commissioning electrode actuated water level transmitter of approved make with all accessoreis to protect against dry running of pump. complete with all lead and lif...

Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder ...

Supplying of copper control cable a) 4 core 2.5 sqmm complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

Supplying of copper control cable b) 4 Core 6 Sq.mm Cables complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

Supplying of copper control cable c) 2 Core 6 Sq.mm Cables complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

Supplying of copper control cable d) 2 Core 2.5 Sq.mm Cables complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work...

Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors and complete as per directions, 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Arm...

Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors and complete as per directions, 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Arm...

Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation cha...

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Design, fabrication, supply, assembling, testing and commissioning of Main LT Panel made of sheet metal duly painted with recess for cable entries at bottom suitable for 415V equipped with circuit bre...

Designing, Supplying, Installing, Commissioning & testing of Flow Control Valve / Pressure relief valve for inlet with flow measuring, flow controlling, pressure monitering & web based with cable, PLC...

PUMP HOUSE LIGHTING : Open Conduit SystemSupplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS2509 with suitable size bends, junction boxes, adhesive paste etc ,and fixing using...

Wiring for lighting / power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...

Wiring for lighting / power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...

Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand...

Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0sqmm (Earthwire)FRLS multi strand P...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existi...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existi...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch complete with all lead and lifts including loading and unloa...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300mm) complete with all lead and lifts including loading and unloading...

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

Supplying of 1*4 feet-PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI80. Power Input:220-240V @ 50 /60Hz &Powe...

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. Electronic stepped regulator. complete with all lead and lifts including loading and unloading and as pe...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ba...

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fittin...

Fabricating supplying and mounting MS box made out 18SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. complete with all lead and lifts including ...

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

LED Light fixture with 40W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agen...

11 KV ELECTRICAL SUBSTATION : Lightning Arrestor 9KV LA, 5KA Polymeric type with ground disconnector (1 for Incoming/2 for transformer) complete with all lead and lifts including loading and unload...

Isolators:11 KV Isolator - 400 Amps, Double Break GOS complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

11KV DOLO Cut Out complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

Conventional RMU (VCB Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427 One Breaker (OD) Panel with Copper Busbar complete with all lead and lifts including loading and unloading an...

Testing & Commissioning For single 11 kV panel outdoor type/kiosk complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of...

a) Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 mm dia vertical 4 TMT ...

b) Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the dir...

Station Yard Lightning a) RCC pole 8 mtr Long, 115 kg WL complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

b) Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for w...

c) Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded po...

d) Supplying and Fixing of 32mm dia class A GI pipe bracket up to 2 mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts LED tube street light fitting of all capacities to GI or...

Grounding equipements Supplying and running of 25x3 mm GI/Copper strips for grounding connections to 11 kV LA/ GOS/Transformer/Cubicle/ Mounting structures etc.,using necessary fixing material as per ...

i) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg including excavation and backfilling complete wi...

ii) Good Quality well burnt Charcoal for grounding purposes packed in nonreturnable gunny bag of 30 Kg each complete with all lead and lifts including loading and unloading and as per specification wi...

iii) Good Quality Salt for grounding purposes packed in 50 Kg gunny bag complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-ch...

iv) Supplying and providing 450mm dia,450mm height, 1.5 to 2inch thick hume pipe color (non pressure type)including naming for each earth pit including all lead and lifts etc., complete with all lead ...

Fire fighting equipements with necessary mounting stand:Foam type extinguisher 9.0 Litre Capacity complete with all lead and lifts including loading and unloading and as per specification with the d...

Fire fighting equipements with necessary mounting stand:Carbon dioxide type 4.5kg capacity complete with all lead and lifts including loading and unloading and as per specification with the directions...

Fire fighting equipements with necessary mounting stand:Dry Chemical powder type 4.5 kg Capacity complete with all lead and lifts including loading and unloading and as per specification with the dire...

G.I.Bucket 9 Ltr.capacity complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

Steel stand complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.

Supplying and installation of RUBBER MAT 1mtr x 1mtr -10mm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications. complete with all lead and li...

RISING MAIN : Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. complete with all lead and lifts including loading and unloa...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. B) Above 600 mm to 900 mm dia complete with all lead and lifts including loading and unloading and as...

Providing and laying 250 mm thick sand blanket below embankment including cost of all materials, machinery, labour, spreading to specified thickness and all other ancillary operations complete. comple...

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel raising main pipe of specified diameter and ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. ...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

CONSTRUCTION OF VALVE CHAMBER : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine agg...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

ROAD CROSSING : Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately. By Mechanical Means A) Bituminous course. comple...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and filling murrum / gravely soil ( CNS soil ) for foundation or around pipes including cost of all materials, labour, spreading soil in layers of 100 to 150 mm, breaking clods, watering, co...

Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...

Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 percent of mix and filler, tr...

IMPROVEMENTS TO EXISTING CANAL : Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. complete with all lead and lifts includin...

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing cohesive non-swelling (CNS) soil lining to canals using soil from borrow area including cost of all materials, labour, machinery, spreading soil in layers of thickness not more than 150 mm, ...

Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour, cl...

Providing and laying insitu vibrated M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour, c...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...