CONSTRUCTION OF DOUBLE STOREY BUILDING ( ART CRAFT , SCIENCE LAB 2 ADDITIONAL CLASS ROOMS AND LIBRARY AT GHSS SUINSAR (ZONE GANDHI NAGAR) DISTRICT JAMMU

Amount

Demolishing Brick tiles covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metre lead.

Demolishing of mud phaska in terracing and disposal of material with in 50 metre lead.

Demoloshing RCC work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50m lead

Demolshing brick work manually/ mechanical means including stacking of serviceable material and disposal of unserviceable material with in 50m lead in cement mortar

Demolshing cement concrete manually/ mechanical means including disposal of material with in 50m lead 1:3:6 or richer mix

Demolshing cement concrete manually/ mechanical means including disposal of material with in 50m lead 1:4:8 or leaner mix

Earthwork in excavation by manual means in trenches for foundation,drains, pipes,cables etc(not exceeding 1.5 mt in width)and for shafts,wells cesspits and the like not exceeding 10sqm on plan depth up to 1.5mt including disposal of excavated earth up to 1 mt from cutting edge disposed earth to be levelled and neatly dressed. All kinds of soils .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate with 40mm nominal size) Crushed including all lead lift and all carriages.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed. including all lead lift and all carriages.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)including all lead lift and all carriages.

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15°slope. excluding cost of centering and shuttering , all work upto floor V level including all lead lift and all carriages.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) including all lead lift and all carriages.

Reinforcement for RCC work including straightening cutting, bending, placing in position & binding all complete with TMT bars.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) & Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) including all lead lift and all carriages.

Half brick masnory with bricks of class designation 75 in foundation and plinth in cemet mortar 1:4 (1 cement: 4 coarse sand) & extra for half brick masnory in super structure above plinth level upto floor five level. including all lead lift and all carriages.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Centring and Shuttering including strutting, propping etc and removal of form work for Foundations: footings, bases of columns etc. for mass concrete.

Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform

Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts

Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls (under 20 cms wide)

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand) including all lead lift and all carriages.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge). 35mm Thick first class kail wood.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick Second class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative ply wood both side decorative veneer (type 1) conformiong to IS 1328 BWR type

Providing and fixing glass strips in joints of terrazo/cement concrete floor.40 mm wide and 4 mm thick

Cement concrete Flooring in 1:2:4 (1 cement : 2 coarse sand: 4 Graded Stone aggregate) finishing with floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. compete. 50 mm thick 20 mm nominal size stone aggregate Crushed. including all lead lift and all carriages.

6mm cement plaster to ceiling pf mix 1:3(1 cement 3 fine sand)

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed including all lead lift and all carriages.

Forming grooves of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the grooves complete as per specificatiOns and direcUon of the Engineer-in-charge 13.83.1 15mm wide and 15mm deep groove metre 35.25

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

Providing and laying 75MM thick bed of dry brick aggregate 40 mm thick nominal size including spreading, well rammed, consolidated and grouted with fine sand including finishing smooth etc. complete as per direction of engineer incharge. including all lead lift and all carriages.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4coarse sand) including grouting the joints with white cement and macthing pigments etc. complete size tile 60x60 cm. (Double Charged)

Providing and fixing white vitreous china laboratory sink with C. I. brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the walls wherever required Size 600x450x200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 40 mm dia

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg. 15mm nominal bore of standard back type

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, anity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 16mm thick

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. 15 mm dia. nominal bore medium

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. 20 mm dia. nominal bore medium

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15mm nominal bore

Providing and fixing PTMT grating of approved quality and colour Circular type 125 mm nominal dia with 25mm waste hole.

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 15mm Nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 20mm nominal bore

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm Nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20mm nominal bore

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 75MM

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 75MM

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Single socketed pipes 110 mm diameter.

Constructing soak pit 1.20x1.20x1.20m filled with birckbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design

Constructing brick masonry manhole in cement mortar1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cemE?nt : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stoneaggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design. Inside size 90x80 em and 45 em deep including C.l. cover with frame (light duty) 455x61 Omm.internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 Crushed stone aggregate.

Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank(Sintex, Electorplast, star, lotus or equivalent having valid ISI license

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm Sliding Door bolts.

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 200x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm

Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete.with residuallype petroleum bitumen of penetration 80'100

Providing & laying Tar sheet roof complete job as per direction of engineer incharge at site

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thickmud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with bhusa at 35kg per cum of earth and gobrileaping with mix 1:1 ( 1 clay: 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat with Hand moulded F.P.S brick tiles.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : in 75x75 mm deep chase.

Making Khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement :2 Coarse sand :4 graded stone aggregate of 20mm nominal size) over P.V.C sheet 1m x1m x 400 micron, finished with 12mm cement plaster 1:3(1 cement: 3 coarse sand) and a coat of neat cement , rounding the edges and making and finishing the outlet complete.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings,frames, guard bar, ladders, railings, brackets, gates & similar works.

Engangement of painter for Writing name of school.

Making Blackboard (1no.)one in each class room in cm (1:4) complete in all respect as per drawing.

Providing and fixing electric point complete in all respects as per directions of Engineer incharge

RAJINDER KUMAR SHARMA

KIRPAL SINGH

Ashwani Kumar

ROHIT ARORA

MOHD. ISMAYAL CONTRACTOR

Joginder Lal

Ajay Kumar

M/S PEE ESS BUILDERS

Sh. Bardri Nath Khajuria

M/S BHARAT BHUSHAN KHAJURIA