SPECIAL REPAIRS TO CIVILIAN MARRIED ACCOMMODATION BLDG NO P 95 AND P 96 AT INS CHILKA

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each including making good to match with the existing complete all as directed by Eng-in-charge.

All as per Item No.1 above but exceeding 1.5 sqm and not exc 4.0 sqm each complete all as directed.

S&F Second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified.

S&F 35 mm thick 2nd class hard wood plain, framed, panelled factory made shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers; supplied and fitted to chowkats complete all as specified.

S & F 35 mm thick second class hard wood glazed and skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc, divided in to squares with plain chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.20(a) complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified

S&F 300 mm size ordinary rat tail rod pattern springs ,ISI marked including roller and plate complete all as directed.

S & F 100 mm size cold rolled mild steel (medium weight) butt hinges complete all as specified.

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.

S & F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.

S & F 150 mm long aluminium alloy handles, anodised,cast type, complete all as directed.

S & F 125 mm long aluminium alloy handles, anodised,cast type, complete all as directed.

S&F 250 mm long, aluminium alloy,anodised sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed.

S & F 75 mm Hasp and staple mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as directed.

S & F 140 mm long floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor complete all as directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for sliding windows track (single/double/triple) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium window shutters,sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including aluminium anodised fittings such as locking arrangements,etc complete all as specified and directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters,without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including aluminium anodised fittings such as peg stay 150 mm long (01 No),100 mm long type B-21hinges (2 Nos) and suitable handle (01 No.) etc, complete all as specified and directed.

S & F Powder coated aluminium deco grills pattern of DG-202 with aperture of size 60x45 mm securing with suitable alumiium channel to frame complete all as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified

M&L for 18 mm thick plywood grade BWR type BB as fixed in repairs complete all as specified.

M&L 6 mm thick teak wood lipping fixed with nails on 18 mm thick ply wood or any type of board complete all as directed.

M&L Deocrative laminate 0.90 mm type1 of surface finish,colour and pattern as approved and fixed with approved adhesive as per manufacturers instructions and as directed by Eng-in-charge.

S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane for fixing to aluminium/wooden joinery complete all as specified.

S&F 4 mm thick figured glass,pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane for fixing to aluminium/wooden joinery complete all as specified.

S&F 25 mm stainless steelcurtain rod as fixed in repairs complete all as directed.

S&F Decorative SS brackets for curtain rails complete all as directed.

M&L RCC ( Nominal mix) 1:2:4 type B1 ( using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified.

M&L RCC ( Nominal mix) 1:2:4 type B1 ( using 20 mm graded stone aggregate) as chajjas and the like complete all as specified.

Use and waste of form work to chullah hoods,chajjas,troughs and similar items including edges rough finished surface of concrete complete all as specified.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified

Dismantling of wrought iron or mild steel work of any description not otherwisw provided for complete all as directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars, etc., and precast concrete articles and removing rubbish to the site complete all as specified and as directed.

M & L for brickwork with using flyash bricks straight or curved on plan exe 6m mean radius, built in cement morter 1:6 complete all as specified.

M & L Forming jambs,etc to openings including cutting,toothing and properly bonding in to old workalso facing,jointing and pointing to match existing work using CM (1:4) complete all as directed.

Taking down existing roof treatment including taking down existing cement mortar from brick/RCC wall/RCC slab by scrapping and removal of rubbish up to distance n.exc 100m complete all as directed.

M&L clean and washing down with water to remove dust etc.on roof surfaces and applying neat cement slurry @3 kg per sqm as in grading to roof surface and providing 10mm thick in cement mortar 1:4 with water proofing compound @ 2% ratio finished even and smooth without using extra cement to recieve roof treatment complete all as specified. (Note : Supply only approved water proofing compound shall be measured and paid separately under relevant item)

M& L for water proofing roof treatment consists of five layered Atactic polyptopylene modified polymeric membrane of minimum 3mm thick not less than 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms / sqm) laid with LPG torch forced application over roof surface with a side & end overlaps of minimum 100mm with and including priming the surface with acoat of hot blown bitumen of grade 85/25 @ 1.2 Kg /sqm each at top and bottom of the membrane as bonding material and a coat of bituminous aluminium primer @ 100 gm / sqm on topincluding sealing all joints by thermo fusion complete all as per manufacturers instructions,as specified and directed.

Supply only water proofing compound complete all as specified.

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in roof complete all as specified.

Demolition of un reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to the site complete all as directed.

M & L PCC (1:4:8) type D2(Using 40mm graded stone aggregate) as in foundation filling in mass concrete complete all as specified.

M&L for 150 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified.

M&L for 100 mm thick PCC (1:2:4) type B2 (using 40 mm graded stone aggregate) as in flooring complete all as specified.

M&L for 75 mm thick PCC (1:2:4) type B2 (using 40 mm graded stone aggregate) as in plinth protection complete all as specified.

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

Roughening surfaces of old concrete floor by picking,sweeping clean and washingdown with water to remove dust ,etc complete all as directed.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM(1:6) complete all as specified.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM(1:6) complete all as specified.

M&L Glazed colured ceramic tiles of size 300 mm x 200 mm x 7 mm thick as in skirting,dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of mortar 10 mm thick in cement mortar 1:3 for fixing tiles complete all as specified.

Taking down cement plaster on brick or stone wall etc including ranking out joints hacking for keys scrubbing down with water etc complete all as specified.

M&L for rendering 15 mm thick in cement mortar 1:6 onfair faces of brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces ofl brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L Preparation of old plastered surfaces of walls including brooming down or steel wire brushing,scraping down moulds,mass and efflorescent salts and greasy spots and applying two coats of white wash complete all as specified and directed.

M&L Preparation of old plastered surfaces of ceilings including brooming down or steel wire brushing,scraping down moulds,mass and efflorescent salts and greasy spots and applying two coats of white wash complete all as specified and directed.

M&L Complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over one coat of primer including and including 3 mm thick wall care putty complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer including and including 3 mm thick wall care putty complete all as specified and directed.

M&L Complete removal of existing treatment on walls,chajjas and cantilever portion and making good the undulated surfaces by filling of putty including rubbing,scraping and grinding make the wall surface smooth and applying two coats of weather proof exterior acrylic emulsion paint exterior grade (100% acrylic) over a coat of primer as per manufacturers instructions,complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint exterior grade (100% acrylic) approved colour over a coat of primer as per manufacturers instructions,complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wooden primer complete all as specified.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

Taking down 15 mm bore steel tubing and connections including cleaning for removal to store complete all as specified.

All as per Item No.68 above but 20 mm bore complete all as directed.

Refixing of 20 mm bore old steel tubing and connections in new or old position complete all as directed.

Refixing of 15 mm bore old steel tubing and connections in new or old position complete all as directed.

S&F GI water tubing 20 mm bore, medium grade conforming to IS 1239 (Part-1) including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified.

All as per Item No.72 above but 15 mm bore complete all as specified.

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as directed.

S&F 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as directed.

Taking down eves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as directed.

S&F 110 mm bore PVC (SWR) soil,waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps complete all as specified.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified.

S&F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified.

S&F 110 mm bore PVC (SWR) branch pieces single Y equal or un equal complete all as specified.

S&F 110 mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified.

S&F White vitreous china pan "Orissa pattern" of size 580 mm x 440 mm with integral foot rests and "P" or "S" trap including provision of lime concrete bedding complete all as specified.

S&F 10 litres capacity, PVC valveless syphonic action type flusing cistern high/ low level, white, with inlet, ball valve, float and handle including brackets, as fixed in repairs complete all as specified.

S & F PVC 32 mm dia flush pipe for high/low level cistern for odissa pattern,including joints complete all as directed.

S & F PVC connection of 15 mm size with PTMT nuts and washers for 600 mm long pipe as fixed in repairs complete all as specified.

S & F 100 mm dia PTMT grating (min weight 25 grams) as fixed in repairs complete all as specified.

S&F 15 mm dia stop valve cast copper alloy chromium plated,fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions as fixed in repairs complete all as specified.

S & F Brass chromium plated shower roses 125mm size with swivel joints fixing to 15 mm dia GI pipe as fixed in repairs,complete all as specified.

S&F 15 mm dia,bib taps,CP,fancy type,with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and as fixed in repairs complete all as specified.

S&F PVC water tanks 500 ltrs capacity rotational moulded (cylindrical vertical with closed top) triple layered, hoisted and fixed in position including taking down old unserviceable tank complete all as specified and directed

S&F Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed (Min weight 210 gms) complete all as directed.

S&F Stack clamps for 110 mm pipe out of 50mm by 5mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof as fixed in repairs complete all as directed.

S&F PVC Floor tap 75 mm plain with grating including jointing with solvent cement complete all as directed.

S&F Cast Iron Floor tap 100 mm dia with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1 using 20 mm graded stone aggregate as fixed in repairs complete all as directed.

S&F Sink made of stainless steel 1 mm thick overall size 495x420 mm bowl size 410mmx330mmx160mm for kitchen or laboratory with plugs,washers including fixing of cantiler brackets and connecting to union,etc fixed on dwarf wall using cement mortar bedding,etc in complete all as directed.

S&F Plate rack of size 24x30x10 inches cat No. P-330 make Prayag or equivalent model as approved by GE.

Taking down carefully copper / aluminium point wiring surface/concealed [light, fan, socket, ceiling or power] complete including fittings, switches, ceiling roses, pendents, regulators, sockets, holders stair case light etc., and making good the disturbed surfaces complete all as specified.

M&L Point wiring concealed with 1.5 Sqmm (Nominal area) PVC insulated, sheathed cable FRLSH grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 1.5 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for one light/fan/ bell/5 amp socket point controlled by one switch complete all as specified.

All as per Item No.100 above but one socket outlet 3 pin.5/6 Amps on the same board with other switches.

All as per Item No.100 above but stair case light point controlled by 2 Nos 2 way switches.

M&L Point wiring concealed with 4 Sqmm (Nominal area) PVC insulated, sheathed cable FRLSH grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 2.50 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for power socket on indepedenet board complete all as specified.

Taking down carefully sub main wiring including batten/conduit by unscrewing from wall,ceiling,etc., and making good the disturbed surfaces complete all as directed.

M&L for sub main wiring concealed with two runs of 6 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 4 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Two runs of 6 Sq.mm,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit.

S & F switch paino flush type single pole one way, 6 Amps, 230 Volts,50Hz complete all as specified.

S & F switch paino flush type single pole two way, 5/6 Amps, 230 Volts,50Hz complete all as specified.

S & F Piano type switch socket outlet 3 pin, 5 Amps, 230V, flush type, complete all as specified.

S & F Piano type switch socket combination 2 in 1,3 pin, 5/15 Amps, 230V,complete all as specified.

S&F Ceiling rose surface bakelite 65x50mm 2/3 terminals, 230 volts,50Hz, complete all as specified.

S&F Five stepped electronic socket type fan regulator, as per site requirement to use in wiring 300 watt complete all as directed.

S&F Bell push 5 Amps,230 V complete all as specified.

S&F Bell electronic ding dong type,AC 230 V,complete all as specified.

S & F in replacement 10Watt,LED bulk head fitting environmental friendly ultra modern,energy saving surface mounted,decorative oval bulk head edge LED luminaries comprising high brightness LEDs complete all as directed. Make : Havells cat part No.HEXAFT 10W LED 857 SSYMBOPC or equivalent model in Bajaj/Philips/Surya Roshini/CG

S&F 20 Watt, tube light fitting with lamp, Endura linear LED wall and surface mounted LED batten,with THD<20% poly carbonate housing and integrated driver for efficient heat dissioatio with all accessories complete all as directed. Make : Havells cat part No.LUMILNEBS20W LED865SPCWH or equivalent model in CG/ Bajaj/Philips/Surya Roshini.

S&F 9 Watt, tube light fitting with lamp, Endura linear LED wall and surface mounted LED batten,with poly carbonate housing and integrated driver for efficient heat dissioatio with all accessories complete all as directed. Make : Havells cat part No.LUMILNEBS9W LED865SPCWH or equivalent model in CG/ Bajaj/Philips/Surya Roshini.

S& F in repairs LED street light 25 Watt made up of pressure die cast aluminium housing with high power LED as ligting source and lens embedded PC cover haning top opening separate driver compartment with IP 66 protection and impact resistance of IK07 complete all as directed. Make : Havells cat part No.VILUMINASL25WLED757SASYBOPC or equivalent model in CG/ Bajaj/Philips/Surya Roshini.

S &F in replacement LED retrofit lamp,B-22 hoder based with polycarbonate body and aluminium heat sink with warm white,9/10W LED lamp complete all as specified and directed. Make : Havells/Philips/Surya Roshni/Bajaj/CG

S & F in replacement of Lamp holder (angular),for LED bulb of any type complete all as directed.

Taking down carefully old un serviceable MCB DBs with MCBs of any type by unscrewing from wall,ceiling,etc., and making good the disturbed surfaces to match the original status complete all as directed.

S & F MCB DB,SPN, sheet metal enclosure, double door type, 8 way,AC,240 V with 200 Amps rated bus bar,complete all as specified and directed by Eng-in-charge.

S & F MCB DB,TPN, sheet metal enclosure, double door type, 4 way,AC,415 V with 200 Amps rated bus bar complete all as specified and directed by Eng-in-charge.

S & F MCB 4P,63 Amps, 415 Volts , 50Hz as fixed in repairs complete all as directed by Eng-in-charge.

S & F MCB SPN,40 Amps,240 Volts , C series complete all as directed by Eng-in-charge.

S & F MCB SP 6 to 32 Amps, C Series,240 Volts , complete all as specified and directed by Eng-in-charge.

S&F Exhaust fan heavy duty 300mm sweep, 1400 RPM, AC single phase 230 volts with louver shutter (with mosquito net), including multistranded flexible wire with copper conductor from ceiling rose to exhaust fan and necessary fixing arrangementlike anchor bolts,nuts and grouting,etc and making good the the disturbed surface complete all as directed. Make - Havells/Khaitan/Almonard/Bajaj/CG

M&L Painting of ceiling fans with blades complete in situ with synthetic enamel paintby spraying including filling cavities with filler,one coat after cleaning all dust,etc complete all as directed by Eng-in-charge.

Taking down carefully defective ceiling fans from its position and refixing back to its original position after repairs complete all as directed by Eng-in-charge.

Rewinding of ceiling fan motor of type 1200 mm sweep and any make with super enamelled copper wire of appropriate guage including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish,greasing the bearings,replacement of missing/worn out nuts,bolts,washers,split pins,etc complete all as directed by Eng-in-charge.

S&F in repairs ceiling fan capacitor/ condensors 2.5 mfd of approved make complete all as directed by Eng-in-charge. Make :Havells/Universal/Nicco

S&F in replacement of new ball bearing 6201/6202/6203 including metal filling,matching complete all as directed by Eng-in-charge. Make :SKF/NBC

S&F in replacement of fan clamp with nut & bolt and rubber bush suitable for ceiling fan of any sweep and make complete all as directed by Eng-in-charge.

M&L for cutting openings through brick/stone walls built in cement mortar for fixing exhaust fans of 300 mm sweep including making good in cement mortar (1:4) to match the existing wall surfaces complete all as directed by Eng-in-charge.

M&L Earthing complete with galvanised steel earth plate electrode 600×600× 6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia (up to 7.5 m in length from earth plate ) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point including earth work and excavtion in any type of soil, PCC 1:3:6 type C1 chamber and RCC 1:2:4 type B1 cover 40 mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI light grade pipe for earth lead protection, 20 mm dia GI medium grade pipe for watering, water funnel, testing point etc complete all as specified and directed by Eng-in-charge and testing on completion.

ABHIMANYU MAHARANA

ANIL KUMAR BISWAL

PABITRA MOHAN PARIDA

M/S JAGANNATH SASMAL

BHARAT KUMAR BALL

SOUTHERN BUILDERS

SREE VIJAYALAKSHMI ENTERPRISES

SAI KRISHNA ASSOCIATES