RJPB-Setting up of Quick Watering Arrangements as per CAMTECH design at RJPB.

Item Breakup - B-Sch-B

local sand, with common burnt clay non modular bricks. 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 18 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 105 282 29610 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 13.42 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. 19 13.42.1 Two or more coats on new work Sqm 49.95 92.75 4632.86 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 Sqm 60 158.95 9537 20 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.2 Painting wood work with Deluxe Multi Surface Sqm 4 144.9 579.6 Paint of required shade. Two or more coat 21 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 50 140.05 7002.5 Paint to give an even shade. Two or more coat 22 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 16.0 ROAD WORK 16.1S ROADS 16.3 Supplying and stacking at site. 23 16.3.7 Stone screening 11.2 mm nominal size (Type B) cum 2 2065.7 4131.4 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing G.I. pipes complete with G.I. 18.12 fittings including trenching and refilling etc.- External work 24 18.12.1 15 mm dia nominal bore Metre 20 267.5 5350 25 18.12.2 20 mm dia nominal bore Metre 20 315.35 6307 26 18.12.3 25 mm dia nominal bore Metre 20 417.95 8359 DANAPUR DIVISION-ENGINEERING/EAST CENTRAL RLY 27 18.12.4 32 mm dia nominal bore Metre 10 457.7 4577 28 18.12.5 40 mm dia nominal bore Metre 10 558.35 5583.5 29 18.12.6 50 mm dia nominal bore Metre 10 654.2 6542 30 18.12.8 80 mm dia nominal bore Metre 500 919.1 459550 18.23S C.I./DUCTILE IRON PIPES & SPECIALS Providing flanged joints to double flanged C.I./ 18.30 D.I. pipes and specials, including testing of joints : 31 18.30.4 150 mm diameter pipe Each 10 343.55 3435.5 18.31S C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. 18.31 (the tail pieces if required will be paid separately) : 18.31.3 150 mm diameter 32 18.31.3.1 Class I Each 1 5980.45 5980.45 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and laying S&S C.I. Standard specials 18.66 such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 : 33 18.66.1 Up to 300 mm dia Quintal 1 7509.4 7509.4 Providing and laying Double Flanged (screwed / 18.71 welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : 34 18.71.2 150 mm dia C.I. Double Flanged Pipe Metre 20 2880 57600 20.0 PILE WORK Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, 20.3 excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 35 20.3.1 300 mm dia piles Metre 12 2560.9 30730.8 Extra over single under ream for providing additional bulbs in under reamed piles, under 20.4 specified diameter(only the nos. of extra bulbs are to be paid) 36 20.4.1 300 mm dia piles Each 4 2182.6 8730.4 23.0 RAIN WATER HARVESTING & TUBEWELLS Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, 23.1 including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil 37 23.1.1.3 400 mm dia Metre 90 828.85 74596.5 DANAPUR DIVISION-ENGINEERING/EAST CENTRAL RLY Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, 23.2 including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 23.2.1 All types of soil 38 23.2.1.3 400 mm dia Metre 60 1036.1 62166 23.8 Gravel packing in tubewell construction in cum 25 1479.25 36981.25 accordance with IS: 4097, including providing 39 gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed 23.10 & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 23.10.3 200 mm nominal size dia having minimum wall Metre 150 2082.1 312315 40 thickness 5.40 mm 23.12 Development of tube well in accordance with IS : Hour 72 916.8 66009.6 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch 41 method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore 23.13 well housing/ casing pipe, removable as per requirement, all complete for borewell of: 42 23.13.3 200 mm dia Each 1 280.95 280.95 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per 23.14 IS: 2800 (part I), including necessary bolts & nuts of required size complete. 43 23.14.3 200 mm clamp Each 2 1827 3654 Providing and fixing Bail plug/ Bottom plug of 23.15 required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 44 23.15.3 200 mm dia Each 1 308.55 308.55 Total 9512917.24