Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6482.0 CrAccepted-AOC CRYSTAL TOWER 4TH FLOOR TELIBANDHA RAIPUR | RAIPUR | RAIPUR | CHHATTISGARH | ₹6482.0 Cr | 1 | Accepted-AOC Agreement Done |
| 2 | 2₹7202.9 CrRejected-Finance CIGNUS 14TH 15TH FLOOR PLOT NO 71A KAILASH NAGAR MAYUR NAGAR PASSPOLI POWAI MUMBAI MAHARASHTRA INDIA | MUMBAI | MUMBAI | MAHARASHTRA | 400087 | ₹7202.9 Cr | 2 | Rejected-Finance Not lowest, Hence EMD Return |
| Sl No | Description | Qty | Unit | Tata Projects Limited L2 | Larsen & Toubro Limited,BNF,PAF L1 |
|---|---|---|---|---|---|
| 1.00Part-A : EPC Mode | |||||
| 2.00 | A1 EPC Components
SITE-A1 CONSTRUCTION OF ADVAIT LOK "EKATM DHAM" consisting of Museum Complex and all its allied works as described in the scope of works, tender document, DBRs, Specification and as per drawings with all ancillary buildings and miscellaneous works including all Structural & Civil works inluding Internal and External Development work, Landscape & Horticulture works, External and Internal Electrical system, ELV system, HVAC system, Fire Fighting system, Lifts & Escalators, plumbing, external & intenal water supply system, sewerage system, STP, WTP all as per required capcity and design, water supply from Intake at Kaveri branch of Narmada river with pumps of required capacity alongwith pump house and water tanks of required size(s), all types of Furniture (loose & fixed),all wood works other than decorative carved wood works, Kitchen Equipments, Signages, roads & hard standing works, drainage system, crossover bridge etc. in all respects to make Museum complex functional as per directions of the Employer on EPC basis including all site clearance,development, all type of preparatory works, operation & maintenance as defined in the tender document for five (5) years.
&
SITE-A2 MANDHATA PARKING as shown in the drawings and specified in the tender document including STP, Wash Room (1 Block), Dormitory (1 Block), Ghat, Connecting Road between SITE A-1 to A-2 including Boundary wall/retaining wall, External Development work (Landscape & Horticulture), Electrical system, ELV system, water supply, sewerage, drainage system etc. in all respects as per directions of the Employer on EPC basis including all site clearance,development, all type of preparatory works, operation & maintenance as defined in the tender document for five (5) years. | 1 | Nos | 11,59,28,81,604.5 ₹1159.3 Cr | 9,78,30,16,219 ₹978.3 Cr |
| 3.00 | TOTAL A | 1 | Nos | 11,59,28,81,604.5 ₹1159.3 Cr | 9,78,30,16,219 ₹978.3 Cr |
| 4.00PARTB | |||||
| 5.00 | Part-B : Item Rate Work B1: Decorative Stone Work11003.1 SOLID CARVED STONE WORK Solid stonework with Design,supply,transporting, fabricating, hoisting and fixing in a position with good quality durable Banshi Phadhpur pink / Red sandstone of approved shade with typical carving work of specified size and thickness for different element for all the heights.Stone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. The work shall be carried out as per design based on concept image with combination of different process of carving (manual/ CNC machine/water jet machine). The intent for the carving shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The stone to be fixed including filling of gap, if any, with brick masonery or cement - mortar between RCC / PCC and stone section as per required specification as mentioned in the tender document , in line, Level and plumb including in all respect with the use of copper pins, dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by the architect of employer and employer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer and Employer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer and Employer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views. The rate shall be inclusive of all the material, mock up, labour, including all applicable taxes (excluding GST ), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, wastage, Protection impregnable water based sealer coating, buffing, finishing, cleaning etc, maintaining up till handling over the project complete. The rate shall also include the cutting, bending and installation of copper strips and pins as required for the connection , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone installation. Profile work shall be executed as per architect drawing and details as per sample approved by Employer and Employer's representative.Depth of Craving mentioned as element wise.
11003.1.1 DASHO
110003.1.1.A Banshi Phadpur Red solid sand stone work with carving of required size and depth as per approved drawing & sample.Depth of carving up to 50mm. | 3,461.81 | cft | 3,180 ₹1.1 Cr | 3,968 ₹1.4 Cr |
| 6.00 | 110003.1.1.B Banshi Phadpur Pink solid sand stone work with carving of required size and depth as per approved drawing & sample.Depth of carving up to 50mm. | 580.19 | cft | 4,000 ₹23.2 L | 4,266 ₹24.8 L |
| 7.00 | 11003.1.2 KADAV Banshi Phadpur Red solid sand stone work with carving of required size and depth as per approved drawing & sample. A) 150MM THICK STONE. Length and height as per architect approved design and drawings.Depth of carving up to 50mm. | 3,079.17 | cft | 2,680 ₹82.5 L | 3,968 ₹1.2 Cr |
| 8.00 | 11003.1.2.B Banshi Phadpur Pink solid sand stone work with carving of required size and depth as per approved drawing & sample.
A) 75 MM THICK STONE.Length and height as per architect approved design and drawings. Depth of carving up to 50mm. | 2,399.86 | cft | 3,500 ₹84.0 L | 4,266 ₹1.0 Cr |
| 9.00 | B) 150MM to 350 MMTHICK STONE. Length and height as per architect approved design and drawings.Depth of carving up to 50mm. | 737.92 | cft | 3,500 ₹25.8 L | 4,266 ₹31.5 L |
| 10.00 | 11003.1.3 KANPITH Banshi Phadpur Red solid sand stone solid Stone work with carving of required size and depth as per approved drawing & sample. Depth of carving up to 50mm. | 3,278.33 | cft | 3,060 ₹1.0 Cr | 4,047 ₹1.3 Cr |
Tender Value
Refer Docs
EMD Value
₹50 L
Closing Date
5 Aug 2025, 5:00 pmClosed
Kaushal Signh Bhadauriya
MP State Tourism Dev corp ltd, Bhopal
Engineering, Procurement and Construction and Operation and Maintenance Contract (Lump-Sum cum Item Rate)of ADVAIT LOK (Acharya Shankar Museum Complex and Parking) (EPC-2) at Omkareshwar, District Khandwa, Madhya Pradesh, India
2025_STDC_425343_1
817/Omkareshwar
Open Tender
Civil Works - Others
1095 days
work
Please refer Tender documents.
15 documents required · 15 mandatory
₹50,000
₹50 L
Head office Bhopal
30 Mar 2026
2 Jun 2025
6 Aug 2025
2 Jun 2025
5 Aug 2025
13 Jun 2025
10 Jun 2025
Amount
Part-A : EPC Mode
A1 EPC Components SITE-A1 CONSTRUCTION OF ADVAIT LOK "EKATM DHAM" consisting of Museum Complex and all its allied works as described in the scope of works, tender document, DBRs, Specification and as per drawings with all ancillary buildings and miscellaneous works including all Structural & Civil works inluding Internal and External Development work, Landscape & Horticulture works, External and Internal Electrical system, ELV system, HVAC system, Fire Fighting system, Lifts & Escalators, plumbing, external & intenal water supply system, sewerage system, STP, WTP all as per required capcity and design, water supply from Intake at Kaveri branch of Narmada river with pumps of required capacity alongwith pump house and water tanks of required size(s), all types of Furniture (loose & fixed),all wood works other than decorative carved wood works, Kitchen Equipments, Signages, roads & hard standing works, drainage system, crossover bridge etc. in all respects to make Museum complex functional as per directions of the Employer on EPC basis including all site clearance,development, all type of preparatory works, operation & maintenance as defined in the tender document for five (5) years. & SITE-A2 MANDHATA PARKING as shown in the drawings and specified in the tender document including STP, Wash Room (1 Block), Dormitory (1 Block), Ghat, Connecting Road between SITE A-1 to A-2 including Boundary wall/retaining wall, External Development work (Landscape & Horticulture), Electrical system, ELV system, water supply, sewerage, drainage system etc. in all respects as per directions of the Employer on EPC basis including all site clearance,development, all type of preparatory works, operation & maintenance as defined in the tender document for five (5) years.
TOTAL A
PARTB
Part-B : Item Rate Work B1: Decorative Stone Work11003.1 SOLID CARVED STONE WORK Solid stonework with Design,supply,transporting, fabricating, hoisting and fixing in a position with good quality durable Banshi Phadhpur pink / Red sandstone of approved shade with typical carving work of specified size and thickness for different element for all the heights.Stone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. The work shall be carried out as per design based on concept image with combination of different process of carving (manual/ CNC machine/water jet machine). The intent for the carving shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The stone to be fixed including filling of gap, if any, with brick masonery or cement - mortar between RCC / PCC and stone section as per required specification as mentioned in the tender document , in line, Level and plumb including in all respect with the use of copper pins, dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by the architect of employer and employer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer and Employer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer and Employer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views. The rate shall be inclusive of all the material, mock up, labour, including all applicable taxes (excluding GST ), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, wastage, Protection impregnable water based sealer coating, buffing, finishing, cleaning etc, maintaining up till handling over the project complete. The rate shall also include the cutting, bending and installation of copper strips and pins as required for the connection , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone installation. Profile work shall be executed as per architect drawing and details as per sample approved by Employer and Employer's representative.Depth of Craving mentioned as element wise. 11003.1.1 DASHO 110003.1.1.A Banshi Phadpur Red solid sand stone work with carving of required size and depth as per approved drawing & sample.Depth of carving up to 50mm.
110003.1.1.B Banshi Phadpur Pink solid sand stone work with carving of required size and depth as per approved drawing & sample.Depth of carving up to 50mm.
11003.1.2 KADAV Banshi Phadpur Red solid sand stone work with carving of required size and depth as per approved drawing & sample. A) 150MM THICK STONE. Length and height as per architect approved design and drawings.Depth of carving up to 50mm.
11003.1.2.B Banshi Phadpur Pink solid sand stone work with carving of required size and depth as per approved drawing & sample. A) 75 MM THICK STONE.Length and height as per architect approved design and drawings. Depth of carving up to 50mm.
B) 150MM to 350 MMTHICK STONE. Length and height as per architect approved design and drawings.Depth of carving up to 50mm.
11003.1.3 KANPITH Banshi Phadpur Red solid sand stone solid Stone work with carving of required size and depth as per approved drawing & sample. Depth of carving up to 50mm.
Banshi Phadpur Pink solid sand stone work with carving of required size and depth as per approved drawing & sample.Depth of carving up to 50mm.
11003.1.4 SOLID STONE PILLARBnashi Phadhpur Pink solid SandStone work with typical carving of required size and depth as per approved drawing & sample.Depth of carving up to 50 mm for up to 4 mtr height of piller. More then 4 mtr height of piller , depth of carving up to 75 mm as per approved sample.
11003.1.5 CLADDING PILLAR Bnashi Phadhpur Pink solid SandStone work with typical carving of required size and depth as per approved drawing & sample.( Including cost of approved SS 304 grade steel under cut anchors and specified metal frame system for Fixing. Steel frame ( SS 304 grade steel ) member shall be fixed with adjustable steel bracket ( SS 304 grade steel ), SS 304 anchor fastners as recommended by Employer's / Engineer's representative and SS 304 nuts, bolts and washer as recommended by Employer's / Engineer's representative. The Steel quality shall be SS 304 grade steel and relevent BIS code ).
11003.1.6 BEAM Bnashi Phadhpur Pink solid SandStone work with carving of required size and depth as per approved design & drawing . Depth of carving upto 75mm.
11003.1.7 SAMRAN Bnashi Phadhpur Pink solid SandStone work with Typical Carving of required size and depth as per approved drawing & sample.Depth of carving up to 150mm.(Including Sealing the joints with approved sealant as per Architectural drawing and direction of Engineer's representative. (Joint sealer master seal 473 / master seal 551 or equivalent sealer).
11003.1.8 CEILING Bnashi Phadhpur Pink solid SandStone work with typical carving of required size and depth as per approved drawing & sample - 225mm to 250mm thick of the approved stone ( Including water proofing coating of FAST FLEX or equivalent on the exposed surface of stone and Sealing the joints with approved sealant as per Architectural drawing and direction of Engineer's representative. (Joint sealer master seal 473 / master seal 551 or equivalent sealer). Depth of carving upto 75 mm for 225mm thick stone ceiling.
11003.1.9 TYPICAL DOME Bnashi Phadhpur Pink solid SandStone work with Typical Carving of required size and depth as per approved drawing & sample. ( Including water proofing coating of FAST FLEX or equivalent on the exposed surface of stone and Sealing the joints with approved sealant as per Architectural drawing and as directed by Engineer's representative. (Joint sealer master seal 473 / master seal 551 or equivalent sealer).
11003.1.10 PLAIN DOME WITH CARVED KEY Plain Bnashi Phadhpur Pink SandStone work Dome with Typical Carved Stone Key of required size and depth as per approved drawing & sample. ( Including water proofing coating of FAST FLEX or equivalent on the exposed surface of stone and Sealing the joints with approved sealant as per Architectural drawing and as directed by Engineer's representative. (Joint sealer master seal 473 / master seal 551 or equivalent sealer)
11003.1.11 CARVED CHHAJA Bnashi Phadhpur Pink solid SandStone work with typical carving of required size and depth as per approved drawing & sample.Depth of carving up to 75 mm.
11003.1.12 PLAIN CHHAJA ( PROFILE WORK ) Bnashi Phadhpur Pink solid SandStone work with PROFILE WORK of required size and depth as per approved drawing & sample
11003.1.13 KEWAL Bnashi Phadhpur Pink solid SandStone work with typical carving of required size and depth as per approved drawing & sample.Depth of carving up to 75mm.
11003.1.14 LODHIYA Bnashi Phadhpur Pink solid SandStone work with typical carving of required size and depth as per approved drawing & sample.Depth of carving upto 60 mm.
11003.1.15 KANGRA Bnashi Phadhpur Pink solid SandStone work with carving of required size and depth as per approved drawing & sample. Depth of carving upto 130mm as per approved sample.
11003.1.16 KANAS Bnashi Phadhpur Pink solid SandStone work with typical carving of required size and depth as per approved drawing & sample.
11003.1.17 SAHI Bnashi Phadhpur Pink solid SandStone work with Typical Carving of required size and depth as per approved drawing & sample.Depth of carving up to 75 mm.
11003.1.18 PETI TYPICAL Bnashi Phadhpur Pink solid SandStone work with Typical Carving of required size and depth as per approved drawing & sample ( depth of carving, machine and hand both up to 100 mm as per approved sample.)
11003.1.19CHHATRI Solid Stone work with carving of required size and depth as per approved drawing & sample ( INCLUDING PILLER ,BEAM,CHHAJA,KEWAL,CEILING & SAMRAN) Kewal: 225 to 250 mm height and 450 mm to 500 mm width as per architect drawing. Chhaja: Height: 175 mm to 200 mm and Width: 475 mm to 500 mm as per architect drawing. Samran:Samran type-G Size: 300 mm x 300 mm X ( Height : 2475 mm to 2500 mm ) Piller: Height 3600 mm to 3650 mm. Beam: Height 300 mm.Length and width as per architect Drawings. Ceiling: 200 mm to 225 mm thick Stone
11003.1.20 TERRACE COORIDOOR Bnashi Phadhpur Pink SandStone work with carving of required size and depth as per approved drawing & sample.( including pillers, kewals, parbolic jali and samran) 11003.1.20.1 Kewal-1 size : 200 to 250 mm height and 600 to 700 mm width as per architect drawing.
11003.1.20.2 Kewal-2 size: 200 to 230 mm height and 450 mm to 500mm width of stone.
11003.1.20.3 (Parabolic Jali)Roof jali: 150 mm thick stone.
11003.1.20.4 Piller: height 2200 mm to 2300 mm.
11003.1.20.5 Samran: Samran type -F and height of Samran: 2000 mm to 2100 mm ( Height measure from top of the kewal-2)
11003.1.21 KAMAN Bnashi Phadhpur Pink solid SandStone work with Typical Carving of required size and depth as per approved drawing & sample
11003.1.22 STONE FRAME Bnashi Phadhpur Pink solid SandStone work with Typical Carving of required size and depth as per approved drawing & sample 11003.1.22.A Window Frame
11003.1.22.B Wall Frame
11003.1.23 TORANPATTI Bnashi Phadhpur Pink solid Sand Stone work Typical Carved work - 275 mm to 300 width & maximum 1200 mm height ( depth of carving, machine and hand both up to 100 mm as per approved sample.
11003.1.24 DWARSAKH Bnashi Phadhpur Pink SandStone Dwarsakh work ( Including Talkda, Utrang, Sakh, Bracket,Pickok top,Lamsha, Chhajli ) with Typical Carving of required size and depth as per approved drawing & sample.Depth of carving up to 75 mm.
11003.1.25 CARVEDL SKIRTING KUMBHI LEVEL Soild Stone work with Typical Carving of required size and depth as per approved drawing & sample.Depth of carving upto 50 mm as per approved sample. 11003.1.25.A BANSHI PHADHPUR PINK SAND STONE CARVED BOTTOM SKIRTING
11003.1.25.B PINK GRANITE CARVED BOTTOM SKIRTING
11003.1.26 SOLID STONE CARVED TOP SUPPORT OF JALI Bnashi Phadhpur Pink SandStone work with Typical Carving of required size and depth as per approved drawing & sample.Depth of carving upto 50 mm as per approved sample.
11003.1.27 STONE BITH Bnashi Phadhpur Pink SandStone work with Typical Carving of required size and depth as per approved drawing & sample.Depth of carving up to 75 mm as per approved sample.
11003.1.28 MANDOVER Bnashi Phadhpur Pink SandStone work with Typical Carving of required size and depth as per approved drawing & sample.Depth of carving up to 75 mm as per approved sample.
11003.1.29 WALL STONE AND GALLERY STONE 11003.1.29.A Bnashi Phadhpur Pink SandStone work with Typical Carving of required size and depth as per approved drawing & sample.Depth of carving up to 75 mm as per approved sample.
11003.1.29.B Bnashi Phadhpur Pink SandStone work with Plain Profile work of required size as per approved drawing & sample.
11003.2 STORY TYPE ELEPHANT Design,Supply, transporting, hoisting and fixing in a position with good quality durable Banshi Phadhpur pink sandstone of approved shade of Story-Type Elephant Sculpture work an artistically detailed elephant with various narrative carvings or miniature figures carved . The sculpture tells a story through intricate designs that symbolize cultural, mythological, or historical themes. The elephant is carved or cast with detailed attention to natural anatomy, including life like ears, trunk, tusks, and skin texture. The elephant may feature additional decorative elements such as traditional caparisons (cloth covering), ornamental harnesses, or intricate patterns on the body. The elephant can be depicted in different stances, such as standing, walking, or raising its trunk in a welcoming gesture.Stone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. The work involves hand or machine intricate carving on approved stone, ensuring smooth and sharp detailing with proper finishing. The stone surface should be adequately prepared prior to carving. The stone to be fixed including filling of gap with brick masonery or cement - mortar between RCC and stone section as per required specification as mention in the tender document , in line, Level and plumb in all respect with the use of copper pins, dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by the architect's and Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's / Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views. The rate shall be inclusive of all the material,mock-up, labour, taxes, transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, Wastage, Protection coating, buffing, finishing, cleaning etc, maintaining up till handling over the project etc complete. The rate also includes the cutting, bending and installation of copper strips and pins as required for the connection , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone installation. solid Stone work with Intricate Carving of required size and depth as per approved drawing & sample Height: Ranges from 1 meters to 2.5 meters depending on the requirements. Length ,Height & Thick as per approved design.
11003.3.1HEIGH RELIEF SCULPTURAL WORK Design,Supply, transporting, hoisting and fixing in a position high-relief sculptural work with good quality durable Banshi Phadhpur pink sandstone of approved shade including carving intricate designs with a maximum projection of 300 mm from the base surface, crafted with precision to depict detailed patterns, figures, or motifs as per approved drawings and specifications. Stone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. The work involves hand or machine carving on approved stone, ensuring smooth and sharp detailing with proper finishing. The stone surface should be adequately prepared prior to carving. The stone to be fixed including filling of gap with brick masonery or cement - mortar between RCC and stone section as per required specification as mention in the tender document , in line, Level and plumb including in all respect with the use of copper pins, dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by the architect's and Engineer's representative. All the work shall be executed as per architectural drawing and details as per approved sample (by Employer's / Engineer's representative). Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental works. As per Employer's / Engineer's representative requirmen, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views. The rate shall be inclusive of all the moke-up, material, labour, including all applicable taxes( excluding gst ), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, Wastage, Protection coating, buffing, finishing, cleaning etc, maintaining up till handling over the project etc complete. The rate shall also include the cutting, bending and installation of copper strips and pins as required for the connection , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone installation. High-relief sculptural work - Width of the stone - 900 mm( including carving / embossing ( machine and hand both )depth = upto 300 mm as per approved mock-up ). Height and Length as per approved design.
11003.3.2 Type-B : High-relief sculptural work - depth of Story type intricate carving ( Panel Work) = upto 600 mm as per approved mock-up. Height up to 45 feet and Length as per approved design.Total width of the Stone ( Carving Work + Background Stone) as per Engineer's in charge and Employer's requirment.
WALL BEND Solid stonework with supply, transporting, fabricating, hoisting and fixing in a position with good quality durable Banshi Phadhpur pink sandstone of approved shade with typical carving work of specified size and thickness for different element for all the heights.Stone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine/water jet machine). The design for the carving shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The stone to be fixed including filling of gap with brick masonery or cement - mortar between RCC and stone section as per required specification as mention in the tender document , in line, Level and plumb including in all respect with the use of copper pins, dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by the architect's and Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views. The rate shall be inclusive of all the material, mock-up, labour, including all applicable taxes (excluding gst), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, Wastage, Protection coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include SS 304 garde steel strips, fastner and pins as required for the connection , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone installation. Solid Stone typical Carved Bend such as flower, trees, chhaler patti, tekra etc. - 150 mm height of the stone .Depth of carving, machine and hand both up to 50 mm as per approved sample.
Solid Stone typical Carved Bend such as flower, trees, chhaler patti, tekra etc. - 150 mm height of the stone .Depth of carving, machine and hand both up to 50 mm as per approved sample.
Solid Stone Carved Bend such as rectangle, square or any geomatrical pattern etc. - 150 mm height of the stone .Depth of carving, machine and hand both up to 50 mm as per approved sample.
PLAIN SKIRTING The work involves design,supplying, cutting, and fixing Pink granite stone of 75mm thickness and typically ranging from 250mm to 300 mm. The stone shall be of approved quality, free from cracks, stains, and other defects, and shall match the specified colour and texture. The edges shall be machine-cut with a smooth finish, free from chipping.The surface of the wall where the skirting is to be applied must be cleaned, leveled, and prepared adequately. The stone skirting shall be fixed with a suitable adhesive or mortar mix (such as 1:4 cement mortar or as directed by Engineer's representative) and aligned properly to maintain uniformity along the length of the wall. Joints between the skirting pieces shall be minimized and filled with matching grout or sealant (directed by Engineer's representative ) to ensure a neat and continuous appearance. Expansion joints shall be provided where required, as per the approved drawings.After fixing, the stone skirting shall be polished to a smooth, glossy, or honed finish depending on the specifications. All exposed edges and corners shall be chamfered, rounded, or finished as specified to avoid sharp edges. The surface shall be cleaned and wiped to remove any stains, dirt, or excess mortar. The rate shall include the cost of all materials, labour, cutting, polishing, adhesive/mortar, tools, scaffolding, and final cleaning. Transportation of stone to the site and protection of installed skirting until final handover.
Stone Railing with 3D Jali Work The work include design,providing, carving, shaping, polishing, and installation of stone railing with intricate 3D jali work (perforated or latticed screen) as per approved design, drawing, and specifications. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine/water jet machine). The intent for the carving shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. All the work shall be executed as per architectural drawing and details as per sample approved (by Employer's/ Engineer's representative). Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings includes all the elements and ornamental works.The site for the stone railing installation shall be properly prepared, and the necessary supports or mounts for fixing the stone railing shall be in place.The item consists of a designed to provide both aesthetic appeal and functional safety. The stone shall be of approved quality, free from cracks, stains, and other defects, and shall match the specified colour and texture. 3D jali with piller shall be crafted by skilled artisans, featuring geometric, floral, or traditional motifs. Smooth, polished finish with edges finely chiseled for aesthetic appeal.The jali section shall be intricately carved to achieve a refined, elegant look. Fixed securely using stone anchors, SS 304 grade steel ,or traditional methods like dowels and mortise-tenon joints, cement mortar or adhesive as directed by Engineer's representative. The jali shall be Installed with stone pillars, depending on architectural design.Any gaps between the stone railing and adjacent structures (walls, columns, etc.) shall be properly sealed with approved sealent. After installation, the stone railing shall be polished to a smooth, glossy, or honed finish as per approved sample . All exposed edges and surfaces shall be cleaned and treated to avoid any sharp edges or blemishes. A protective coating or sealer approved by Employer's / Engineer's representative (if required) shall be applied to enhance durability and resistance to weathering. The rate shall be inclusive of all the material,mock-up, labour, including all applicable taxes (excluding GST), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, Wastage, Protection coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include SS 304 grade steel anchor, Fastner, Pins, water and power with necessary cable & accessories required for cutting, Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone Railing installation. Standard height generally between 900 mm to 1200 mm, depending on the use case.
Standard height generally between 900 mm to 1200 mm, depending on the use case.
BALUSTER RAILING The work include providing and fixing decorative stone railing including supply, carving, shaping, polishing, and installation, complete as per approved design, drawing, and specifications. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine/water jet machine). The intent for the carving shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view.The railing shall include stone balusters, handrails, base rails, and any decorative elements as specified, Stone balusters, handrails, and base rails shall be carved or cut as per the design provided. All edges shall be smoothened and finished, with the top of the handrail chamfered or rounded as specified. Mortises or grooves shall be provided in the base rail to hold the balusters securely in place. The handrail shall be designed to sit firmly on top of the balusters, with all joints made flush and neat. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's / Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental works.The site for the stone railing installation shall be properly prepared, and the necessary supports or mounts for fixing the stone railing shall be in place. The stone railing components shall be assembled and fixed using suitable mortar (such as 1:4 cement mortar or adhesive directed by Engineer's representative), ensuring proper alignment and levels. All joints between the balusters, handrail, and base rail shall be filled with matching grout or sealant to create a seamless finish. Any gaps between the stone railing and adjacent structures (walls, columns, etc.) shall be properly sealed with approved sealent. After installation, the stone railing shall be polished to a smooth, glossy, or honed finish as per specifications. All exposed edges and surfaces shall be cleaned and treated to avoid any sharp edges or blemishes. A protective coating or sealer approved by Employer's / Engineer's representative (if required) shall be applied to enhance durability and resistance to weathering .The rate shall be inclusive of all the material,mock-up, labour, including all applicable taxes (excluding GST), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include SS 304 grade steel anchor, Fastner, Pins, water and power with necessary cable & accessories required for cutting, Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone Railing installation. Standard height generally between 900 mm to 1200 mm, depending on the use case.
BIG HANSH WITH PEDESTAL & STAND Design,Supply, fabricating, transporting, hoisting and fixing of Solid Stone HANS WITH PEDESITAL & HAND in a position with good quality durable Banshi Phadhpur pink sandstone of approved shade with typical carving work of specified size and thickness for different element for all the heights.Stone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine/water jet machine). The intent for the carving shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The stone to be fixed , in line, Level and plumb including in all respect with the use of copper pins, dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by the architect's and Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings includes all the elements and ornamental works. Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views. The rate shall be inclusive of all the material,mock-up, labour, including all applicable taxes (excluding gst), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include the cutting, bending and installation of copper strips and pins as required for the connection , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone installation. Solid Stone Typical Carved Stone STAND ( Maximum Height - 900mm ) as per design and approved mock-up.
Solid Stone HANS ( 10'-6"X4'-0"X11' ) WITH PEDESITAL & STAND ( Maximum Height - 900mm ) as per design and approved mock-up.
DRY PLANE CLADDING ( 40mm ) Design,Providing and fixing Dry stone cladding upto 20 metre height with 40mm thick gang saw cut to the required size and shape as per approved drawing fixed to cement based fly ash brick/ RCC/ CC Block/ ACC block /chimney bricks walls as the case be with approved SS 304 grade steel under cut anchors and specified metal frame system. Cladding pattern shall be as per approved drawings, in singal size or in combination of different sizes / materials of stone of required finish , shade and as per approved sample. At the cornor 'L' shape angle stone shall be fixed, so joint line can't be appear at corners. "L" shape stone shall be cut from stone box with wire cutting machine of required thickness as per design ( thickness may be vary as per design, contractor shall not claim for the same ). Offset shall be provided in stone thickness to create groove of approximate size 10 mm as per concept design. Steel frame ( SS 304 grade steel ) member shall be fixed with adjustable steel bracket ( SS 304 grade steel ), SS 304 anchor fastners and SS 304 nuts, bolts and washer as per directed by Engineer's Representative. The Steel quality shall be SS 304 grade steel and relevent BIS code. Framing system shall be using intermediate profile including required accessories, fastners and fixtures and cutting, drilling holes etc. complete as per drawings . The undercut anchor shall be fixed to stone with special bolts, tackles, equipment and as directed by Engineer's representative. Installation, testing and the setting instructions shall be strictly followed as per approved Employer's /Engineer's representative. All beds and joints shall be free from any waviness and to give truly vertical / horizontal surface as required. Sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer's representative. Contractor shall prepare and submit shop drawings, 3d view etc. based on the concept drawings for approval before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental work etc. The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps, pins /metal framing, nuts, bolts, fastners etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone cladding installation. Pink Banshi Phadpur Sand Stone Cladding work - 40mm( Thick )
1st grade Makrana/ Vietnam White Marble Stone Cladding - 40mm
11003.1JALI Stone Jali work with design,supply, fabricating, transporting, hoisting and fixing in a position with good quality Banshi Phadhpur pink sandstone jali in any shape any pattern of approved shade and specified size and thickness for different element for all the heights.Stone shall be hard, sound durable and tough free from cracks, decay and weathering and defects like cavities cracks, flaws, holes, veins, patches of soft or loose materials etc. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine/water jet machine). The drawings for the jali shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in indecative drawing . The jali to be fixed in line, Level and plumb in all respect with the use of SS 304/ metal framing,dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by Engineer's representative. All the work shall be executed as per architectural drawing and detail and as per sample approved by Engineer's representative. Contractor shall prepare and submit shop drawing based on the concept and drawings, design 3d view etc for approved before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamentation work.The rate shall be inclusive of all the material, mock-up, labour, taxes ( excluding GST), transportation, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include supporting SS 304/metal framing work, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of JALI installation. Pink Sand Stone Jali work - 75 mm thick stone JALI
Pink Sand Stone Jali work - 100 mm thick stone JALI
STONE INDEPENDENT INDRA STATUE STATUE(INDRA MURTI) with design,supply,Transporting, hoisting and fixing in a position with good quality durable Banshi Phadhpur pink sandstone of approved shade of specified size and thickness for all the heights. Indra statue shall be meticulously hand and machine both carved with intricate details, featuring the deity’s traditional attributes like his thunderbolt (Vajra) and royal posture, often depicted on his divine mount, Airavata (a celestial elephant). The statue shall capture a sense of majesty and divine authority with lifelike proportions and expressive featuresStone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine/water jet machine). The intent for the STATUE shown are indicative/ tentative and may vary to the extant of design etc as shown in intent image or view. The STATUE to be fixed in line, Level and plumb including in all respect with the use of copper pins, dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by the architect's and Employer's representative. The stone surface of Statue shall be finely polished or left with a natural, textured finish, depending on the desired look as per directed by Engineer's representative.All the work shall be executed as per architectural drawing and details as per sample approved by Employer's / Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings includes all the elements and ornamental works. Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views. The rate shall be inclusive of all the material,mock-up, labour, including all applicable taxes (excluding GST), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning etc, maintaining up till handling over the project etc complete. The rate shall also include the cutting, bending and installation of copper strips and pins as required for the connection , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of statue installation. 11003 .11.1 Pink Sand Stone Statue work - Height more than 72" inch and upto 96" inch.
STONE GHOKHLA Bnashi Phadpur Pink SandStone solid stone ghokhla with Chhajli, Thamli, Dodiya, and Chhaja Solid Stone with supply, Transporting, hoisting and fixing in a position with good quality durable Banshi Phadhpur pink sandstone of approved shade of specified size and thickness for all the height.The Ghokhla shall be designed an arched or rectangular opening often framed by intricate carvings and supported by ornamental brackets.Chhajli: Refers to the roof or canopy over the Ghokhla. It serves both aesthetic and functional purposes. The underside of the Chhajli shall be elaborately carved with floral or geometric patterns, adding to the decorative appeal.Thamli: These shall be the vertical stone columns or pillars that support the structure, particularly the ghokhla platform or the Chhajli above. The Thamli shall be carved with detailed designs, such as fluted patterns, scrollwork, or floral motifs. The capital (top) of each Thamli may feature ornate detailing.Chhaja: A stone overhang or eave that projects outward above the ghokhla and Chhajli. It helps divert rainwater away from the structure and adds another layer of decoration. The Chhaja shall be typically adorned with carved brackets (kagura’s) that support it from below, often featuring intricate designs like floral patterns, animal figures, or historical motifs. The edge of the Chhaja may be scalloped or otherwise ornamented to add a finishing touch.The design for the carving shown will be indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental works. As per Employer's/ Engineer's representative requirment ,Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material as per approved shop drawing & 3d views. The rate shall be inclusive of all the material, labour, taxes, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, finishing work, repairing of carving (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone carving.
Bnashi Phadpur Pink SandStone solid stone bracket with supply, Transporting, hoisting and fixing in a position of approved shade of specified size and thickness for all the height.The bracket shall be usually L-shaped, designed to provide structural support. The vertical portion is attached to the wall, while the horizontal portion extends outward to support features such as jharokhas (stone windows), or chhajjas (overhangs).The surface of the bracket shall be finely carved with detailed motifs and patterns, which will include:Floral motiff: Flowers, vines, and leaves delicately carved into the surface.Geometric patterns: Repeating shapes such as interlocking circles, diamonds, or scrolls.Scrollwork: Often found on the edges, with curved lines and leaf-like structures. It shall serve both aesthetic and functional purposes.The intent for the carving shown will be indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental works. As per Employer's/ Engineer's representative requirment ,Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material as per approved shop drawing & 3d views. The rate shall be inclusive of all the material, labour,including all applicable taxes (excluding GST), cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, finishing work, repairing of carving (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone carving.Height: Typically between 1.5 to 3 feet, depending on the size and purpose. Depth: Projects outward 16-22 inches, providing adequate support for architectural features like overhangs or balconies Thickness: The thickness of the bracket varies between 5-7 inches, allowing for both strength and detailed carving without compromising structural integrity
STONE PATTERN WALL Stone 3D Pattern Wall work with design,supply, fabricating, transporting, hoisting and fixing in a position with good quality Banshi Phadhpur pink sandstone jali in any shape any pattern of approved shade and specified size and thickness for different element for all the heights.Stone shall be hard, sound durable and tough free from cracks, decay and weathering and defects like cavities cracks, flaws, holes, veins, patches of soft or loose materials etc. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine/water jet machine). The drawings for the jali shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in indecative drawing . The Stone to be fixed in line, Level and plumb in all respect with the use of SS 304/ metal framing,dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by Engineer's representative. All the work shall be executed as per architectural drawing and detail and as per sample approved by Engineer's representative. Contractor shall prepare and submit shop drawing based on the concept drawings, design, 3d view etc for approval before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamentation work.The rate shall be inclusive of all the material, mock-up, labour, taxes ( excluding GST), transportation, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include supporting SS 304/metal framing work, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of pattern carved stone installation. Pink Sand Stone 3d pattern wall work - Depth of pattern up tp 75 mm.
PANCHAYTAN TEMPLE 11003.15.1 SOLID STONE CARVED STONE WORKSolid stonework with Design,supply,transporting, fabricating, hoisting and fixing in a position with good quality durable Banshi Phadhpur pink sandstone of approved shade with typical carving work of specified size and thickness for different element for all the heights.Stone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. Before starting the work, the contractor shall get the samples of stone approved by Engineer-In-charge. Approved sample shall be kept in custody of Engineer-in-Charge. Stones supplied and used on the work shall confrm to sample with regard to soundness, colour, veining and general texture.The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine/water jet machine).Upon completion of the carving, the stone surface shall be polished, honed, or given a natural finish as required, ensuring smooth edges and a uniform appearance. Where necessary, the application of surface treatment, such as sealing or weatherproofing as approved by employer's and Engineer's representative, shall be done to enhance durability and protect the carved stone from environmental elements. The intent for the carving shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The stone to be fixed including filling of gap, if any, with brick masonery or cement - mortar between RCC / PCC and stone section as per required specification as mentioned in the tender document , in line, Level and plumb including in all respect with the use of copper pins, dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by the architect of employer's and Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's / Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views. Depth of carving shall be decided by approved( by Employer's / Engineer's representative) mock-up.The rate shall be inclusive of all the material,BRICK MASONERY, CEMENT MORTOR, PCC etc work with material, mock up, labour, including all applicable taxes (excluding GST ), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, wastage, water repellent coating as per approved by Employer's / Engineer's representative , buffing, finishing, cleaning etc, maintaining up till handling over the project complete. The rate shall also include the cutting, bending and installation of copper strips and pins as required for the connection , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone installation.JAGTI Banshi Phadpur PINK SOLID STONE WORK with carving of required size and depth as per approved drawing & sample.
PITH Banshi Phadpur PINK SOLID STONE WORK with carving of required size and depth as per approved drawing & sample.
OTLA Banshi Phadpur PINK SOLID STONE WORK with carving of required size and depth as per approved drawing & sample.
MANDOVER Banshi Phadpur PINK SOLID STONE WORK with carving of required size and depth as per approved drawing & sample.
PILLER Banshi Phadpur PINK SOLID STONE WORK with carving of required size and depth as per approved drawing & sample.
BEAM Banshi Phadpur PINK SOLID STONE WORK with carving of required size and depth as per approved drawing & sample at bottom and at side. Depth of carving upto 75mm.
SAMRAN Banshi Phadpur PINK SOLID STONE WORK with Carving of required size and depth as per approved drawing & sample.(Including Sealing the joints with approved sealant as per Architectural drawing and direction of Engineer's representative. (Joint sealer master seal 473 / master seal 551 or equivalent sealer)
CEILING Banshi Phadpur PINK SOLID STONE WORK with typical carving of required size and depth as per approved drawing & sample -( Including water proofing coating of FAST FLEX or equivalent on the exposed surface of stone and Sealing the joints with approved sealant as per Architectural drawing and direction of Engineer's representative. (Joint sealer master seal 473 / master seal 551 or equivalent sealer).
TYPICAL DOME Bnashi Phadhpur Pink solid SandStone work with Typical Carving of required size and depth as per approved drawing & sample. ( Including water proofing coating of FAST FLEX or equivalent on the exposed surface of stone and Sealing the joints with approved sealant as per Architectural drawing and as directed by Engineer's representative. (Joint sealer master seal 473 / master seal 551 or equivalent sealer).
SIKHAR Banshi Phadpur PINK SOLID STONE WORKwith carving of required size and depth as per approved drawing & sample.
BARSHAKH Banshi Phadpur PINK SOLID STONE Dwarsakh work ( Including Talkda, Utrang, Sakh, Bracket,Pickok top,Lamsha, Chhajli ) with Intricate Carving of required size and depth as per approved drawing & sample.
WET PLANE CLADDING ( 40mm ) Design,Providing and fixing Dry stone cladding upto 20 metre height with 40mm thick gang saw cut to the required size and shape as per approved drawing fixed to cement based fly ash brick/ RCC/ CC Block/ ACC block /chimney bricks walls .The stone CLADDING shall be fixed with a suitable adhesive or mortar mix (such as 1:4 cement mortar or as directed) and aligned properly to maintain uniformity along the length of the wall. Joints between the cladding pieces shall be minimized and filled with matching grout or sealant to ensure a neat and continuous appearance. Cladding pattern shall be as per approved drawings, in singal size or in combination of different sizes / materials of stone of required finish , shade and as per approved sample. At the cornor 'L' shape angle stone shall be fixed, so joint line can't be appear at corners. "L" shape stone shall be cut from stone box with wire cutting machine of required thickness as per design ( thickness may be vary as per design, contractor shall not claim for the same ). Offset shall be provided in stone thickness to create groove of approximate size 10 mm as per concept design. Installation, testing and the setting instructions shall be strictly followed as per approved Employer's /Engineer's representative. All beds and joints shall be free from any waviness and to give truly vertical / horizontal surface as required. Sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer's representative. Contractor shall prepare and submit shop drawings based on the concept drawings for approval before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental work etc. The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include copper pins, copper strips etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone cladding installation.
TORAN Bnashi Phadpur Pink SandStone solid stone TORAN WORK with design,supply, Transporting, hoisting and fixing in a position with good quality durable Banshi Phadhpur pink sandstone of approved shade of specified size and thickness for all the height.The Toran shall be typically featured an elegant arch, often flanked by two robust pillars. The arch shall be either semicircular or segmented with intricate designs and sculptures as per approved design & drawings by Employer' representative.Stone Toran shall be often adorned with depictions of deities, celestial beings (apsaras), yakshas (nature spirits), or other figures in a narrative style. These figures are intricately carved, bringing stories from epics and puranas to life.The TORAN shall be elaborately carved with floral or geometric patterns, adding to the decorative appeal.The design for the carving shown will be indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative.Upon completion of the carving, the stone surface shall be polished, honed, or given a natural finish as required, ensuring smooth edges and a uniform appearance. Where necessary, the application of surface treatment, such as sealing or weatherproofing as approved by employer's and Engineer's representative, shall be done to enhance durability and protect the carved stone from environmental elements. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental works. As per Employer's/ Engineer's representative requirment ,Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material as per approved shop drawing & 3d views. The rate shall be inclusive of all the material, labour, taxes, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include copper pins, copper strips , water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, finishing work, repairing of carving (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone carving.
KASHASAN Bnashi Phadpur Pink solid Sand stone KASHAN with supply, Transporting, hoisting and fixing in a position of approved shade of specified size and thickness for all the height.The Kashasan shall be finely carved with detailed motifs and patterns, which will include:Floral motiff: Flowers, vines, and leaves delicately carved into the surface. It shall serve both aesthetic and functional purposes.The intent for the carving shown will be indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's / Engineer's representative. Upon completion of the carving, the stone surface shall be polished, honed, or given a natural finish as required, ensuring smooth edges and a uniform appearance. Where necessary, the application of surface treatment, such as sealing or weatherproofing as approved by employer's and Engineer's representative, shall be done to enhance durability and protect the carved stone from environmental elements.Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental works. As per Employer's / Engineer's representative requirment ,Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material as per approved shop drawing & 3d views. The rate shall be inclusive of all the material, labour,including all applicable taxes (excluding GST), cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include copper pins, copper strips, water and power with necessary cable & accessories required for cutting, Mock-up / samples , Carving, finishing work, repairing of carving (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone carving.
FLOORING Supply, Transporting, hoisting and fixing flooring with white makrana marble in a position of approved shade of specified size and thickness as per approved design & drawings by Employer's representative, over a prepared base with cement mortar (1:4 ratio, i.e., 1 part cement: 4 parts coarse sand or as directed by employer's respresentative) of thickness 20mm to 25mm. or adhesive for fixing the flooring material. Before fixing, Cleaning and leveling of the base floor, ensuring it shall be free of dust, grease, and other foreign materials. Applying a layer of primer or waterproofing compound (if required) to prevent moisture migration.Providing and laying a cement concrete bed of [mention ratio ........ 1:4:8] with a thickness of 75 mm or 100 mm] for base preparation (if required).Before starting the work, the contractor shall get the samples of stone approved by Employer's representative.Approved sample shall be kept in custody of Employer's representative. Stones supplied and used on the work shall confirm to sample with regard to soundness, colour, veining and general texture. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's / Engineer's representative. Upon completion of the flooring work, the stone surface shall be polished, honed, or given a natural finish as required, ensuring a uniform appearance.Contractor shall prepare and submit shop drawings based on the concept drawings for approvel before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements. As per Employer's / Engineer's representative requirment ,Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material as per approved shop drawing . The rate shall be inclusive of all the material, labour,including all applicable taxes (excluding GST), cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include copper pins, copper strips, water and power with necessary cable & accessories required for cutting, Mock-up / samples , the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone carving.
STONE BENCHES Solid Stone Bench with Design,supply,transporting, hoisting,finishing and fixing in a position with good quality durable Banshi Phadhpur pink sand stone of approved shade of specified size and thickness for different element .Stone shall be hard, sound durable and tough, free from cracks, decay and weathering effect and defects like cavities, flaws, holes, veins, patches of soft or loose materials etc. The work shall be carried out as per design based on concept image . The intent for the benches shown are indicative/ tentative and may vary to the extant of pattern/ design etc as shown in intent image or view. The stone to be fixed in line, Level and plumb including in all respect with the use of dowels, epoxy or stone fixing adhesive of approved make and cement mortar with matching pigment as required and as approved by employer and employer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer and Employer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer and Employer's representative requirment.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding GST ), transportation,fixing in position, cranes, machines, tools, tackles, equipment’s, wastage, Protection impregnable water based sealer coating, buffing, finishing, cleaning etc, maintaining up till handling over the project complete. The rate shall also include water and power with necessary cable & accessories required for cutting,installation and finishing work, repairing of stone (if any), the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone installation. Profile work shall be executed as per architect drawing and details as per sample approved by Employer and Employer's representative. Height ( Saet from the ground ) : up to 18 inches. (as per directed by employer and employer's representative)Depth ( Saet Width) : up to 20 inches.( as per directed by employer and employer's representative)Length: up to 6' (ft) suitable for 3 persons. ( as per directed by employer and employer's representative ) Back rest Height: up to 18 inches above the seat ensure comfertable back support as per directed by employer and employer's representative.
DECORATIVE STONE POTS The decorative stone pots shall be made from high-quality, durable Granite / sandstone / Marble of approved shade, size, and thickness as specified, and shall meet the aesthetic and functional requirements as per the design intent. The stone shall be hard, sound, durable, and free from any defects, including cracks, decay, weathering effects, cavities, flaws, holes, veins, or patches of soft or loose materials. The pots shall be manufactured to the specified dimensions ranging from 900mm to 1200mm in height, with designs to complement the overall theme of the project. The stone pots shall be crafted to the design shown in the concept image or as per the modified details based on the final approved drawings, as directed by the Employer and Employer's representative. The intent for the stone pots is indicative, and adjustments to the pattern/design may be required to match the site conditions or architectural context.. The rate shall be inclusive of all the material, labour,including all applicable taxes (excluding GST), cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, buffing, finishing, cleaning, maintaining up till handling over the project etc complete. The rate shall also include SS pins, water and power with necessary cable & accessories required for cutting, Mock-up / samples , the safety appliance, supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of stone carving.
Stone Masonery Providing and laying Coursed rubble stone masonry(1st sort) in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand), include curing, scaffolding, raking of joints, and necessary dressing of stones etc., complete as per direction of Employer and Engineer-in-Charge.
TOTAL B1
B2 DECORATIVE WOOD WORK
B2: Decorative Wood Work Wooden Cornice Frame Solid wooden Frame work with Design,supply,transporting, fabricating, hoisting and fixing in a position with CP ( Central Province ) teak wood (Grade/quality/class to be mentioned) known as natural durability, resistance to moisture & Termites and elegant grain patterns and minimal knots or blemishes "A grade Solid CP ( Central Province ) teak wood" of approved shade with architecture element of specified size and thickness for different element for all the heights. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine). The intent for Wooden Frame work shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The wood to be fixed in line, Level and plumb including in all respect with the use of (SS 304 grade steel) supporting cramps, screws,pins /metal framing, concealed fastners,interlocking system, adhesive material ( as per directed by employer's and Engineer's representative ) of approved make with matching pigment as required and as approved by the architect of employer's and Engineer's representative. Wooden Frame to be smooth finished with optional staining or natural varnish for enhanced appearance as per directed by Employer's/ Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Seasoning and kiln drying treatment, Anti- termite and anti- fungal treatment, polishing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps,screws, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of wood cladding installation.A) Solid Wooden Band: Thickness range from 100 mm to 175 mm and Width range from 100 mm to 175 mm. Length as per site requirment.
Wooden CladdingDesign,Providing and fixing "A Grade Solid CP ( Central Province ) teak wood" cladding upto 20 metre height to the required size and shape as per approved drawing fixed with approved SS 304 grade steel under cut anchors and specified metal frame system. Cladding pattern shall be as per approved drawings, in singal size or in combination of different sizes,shade and as per approved sample. The Steel quality shall be SS 304 grade steel and relevent BIS code.The wood to be fixed in line, Level and plumb including in all respect with the use of (SS 304 grade steel) supporting cramps, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material of approved make with matching pigment as required and as approved by employer's and Engineer's representative. Installation, testing and the setting instructions shall be strictly followed as per approved Employer's /Engineer's representative. All beds and joints shall be free from any waviness and to give truly vertical / horizontal surface as required. Sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer's representative. Contractor shall prepare and submit shop drawings, 3d view etc. based on the concept drawings for approval before starting the work. Shop drawing contains all the final execution details in AutoCAD drawings including all the elements and ornamental work etc. The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Water Repellent coating, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of wood cladding installation. Wooden Cladding work - 25mm( Thick
Wooden Cladding work - 25mm( Thick )
Wooden Cladding work - 75 mm( Thick )
Wooden Bend A Grade Solid CP ( Central Province ) teak wooden Bend work with Design,supply,transporting, fabricating, hoisting and fixing in a position with A grade teak wood known as natural durability, resistance to moisture & Termites and elegant grain patterns and minimal knots or blemishes A grade Solid CP ( Central Province ) teak wood of approved shade with architecture element of specified size and thickness for different element for all the heights. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine). The intent for Wooden Bend work shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The wood to be fixed in line, Level and plumb including in all respect with the use of (SS 304 grade steel) supporting cramps, screws,pins /metal framing, concealed fastners,interlocking system, adhesive material ( as per directed by employer's and Engineer's representative ) of approved make with matching pigment as required and as approved by the architect of employer's and Engineer's representative. Wooden Frame to be smooth finished with optional staining or natural varnish for enhanced appearance as per directed by Employer's/ Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Seasoning and kiln drying treatment, Anti- termite and anti- fungal treatment, polishing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps,screws, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of wood cladding installation.A) Solid Wooden Bend: Thickness ranges from 75 mm to 550 mm and Width range from 75 mm to 150 mm . Length as per site requirment.
Wood Ceiling Bend Solid wooden Ceiling Bend work (Solid CP ( Central Province ) teak wooden) with Design,supply,transporting, fabricating, hoisting and fixing in a position with Premium grade teak wood known as natural durability, resistance to moisture & Termites and elegant grain patterns and minimal knots or blemishes A grade Solid CP ( Central Province ) teak wood of approved shade with architecture element of specified size and thickness for different element for all the heights. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine). The intent for Wooden ceiling bend work shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The wood to be fixed in line, Level and plumb including in all respect with the use of (SS 304 grade steel) supporting cramps, screws,pins /metal framing, concealed fastners,interlocking system, adhesive material ( as per directed by employer's and Engineer's representative ) of approved make with matching pigment as required and as approved by the architect of employer's and Engineer's representative. Wooden Frame to be smooth finished with optional staining or natural varnish for enhanced appearance as per directed by Employer's/ Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Seasoning and kiln drying treatment, Anti- termite and anti- fungal treatment, polishing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps,screws, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of wood cladding installation.A) Solid Wooden Ceiling Cornice Bend: Thickness range from 50 mm to 75 mm and Width range from 50 mm to 75 mm. Length as per site requirment.
B) Solid Wooden Ceiling Carved Bend: Thickness range from 50 mm to 225 mm and Width range from 50 mm to 500 mm. Length as per site requirment.
Wooden Dome Ribs Solid CP ( Central Province ) teak wooden Dome Ribs work with Design,supply,transporting, fabricating, hoisting and fixing in a position with A grade CP teak wood known as natural durability, resistance to moisture & Termites and elegant grain patterns and minimal knots or blemishes A grade Solid CP ( Central Province ) teak wood of approved shade with architecture element of specified size and thickness for different element for all the heights. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine). The intent for Wooden Dome Ribs work shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The wood to be fixed in line, Level and plumb including in all respect with the use of (SS 304 grade steel) supporting cramps, screws,pins /metal framing, concealed fastners,interlocking system, adhesive material ( as per directed by employer's and Engineer's representative ) of approved make with matching pigment as required and as approved by the architect of employer's and Engineer's representative. Wooden Frame to be smooth finished with optional staining or natural varnish for enhanced appearance as per directed by Employer's/ Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Seasoning and kiln drying treatment, Anti- termite and anti- fungal treatment, polishing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps,screws, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of wood cladding installation. A) Solid Wooden Dome Ribs : 150 MM X 150MM Size as per Architect Drawings .
Wooden Jali Solid wooden Jali work ( A Grade Solid CP ( Central Province ) teak wood) with Design,supply,transporting, fabricating, hoisting and fixing in a position with Premium grade teak wood known as natural durability, resistance to moisture & Termites and elegant grain patterns and minimal knots or blemishes A grade Solid CP ( Central Province ) teak wood of approved shade with architecture element of specified size and thickness for different element for all the heights. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine). The intent for Wooden jali work shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The wood to be fixed in line, Level and plumb including in all respect with the use of (SS 304 grade steel) supporting cramps, screws,pins /metal framing, concealed fastners,interlocking system, adhesive material ( as per directed by employer's and Engineer's representative ) of approved make with matching pigment as required and as approved by the architect of employer's and Engineer's representative. Wooden Frame to be smooth finished with optional staining or natural varnish for enhanced appearance as per directed by Employer's/ Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Seasoning and kiln drying treatment, Anti- termite and anti- fungal treatment, polishing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps,screws, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of wood cladding installation. A) Solid Wooden Jali : 50 MM thick Wood
Wooden Dome Keys A Grade Solid CP ( Central Province ) teak wood Dome Key work with Design,supply,transporting, fabricating, hoisting and fixing in a position with Premium grade teak wood known as natural durability, resistance to moisture & Termites and elegant grain patterns and minimal knots or blemishes A grade Solid CP ( Central Province ) teak wood wood of approved shade with architecture element of specified size and thickness for different element for all the heights. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine). The intent for Wooden Dome key work shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The wood to be fixed in line, Level and plumb including in all respect with the use of (SS 304 grade steel) supporting cramps, screws,pins /metal framing, concealed fastners,interlocking system, adhesive material ( as per directed by employer's and Engineer's representative ) of approved make with matching pigment as required and as approved by the architect of employer's and Engineer's representative. Wooden Frame to be smooth finished with optional staining or natural varnish for enhanced appearance as per directed by Employer's/ Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Seasoning and kiln drying treatment, Anti- termite and anti- fungal treatment, polishing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps,screws, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of wood cladding installation. Customizable heights, diameters and profiles as per architect design & drawings.
WOODEN STATUE A Grade Solid CP ( Central Province ) teak wood Statue work with Design,supply,transporting, fabricating, hoisting and fixing in a position with A grade teak wood known as natural durability, resistance to moisture & Termites and elegant grain patterns and minimal knots or blemishes A grade Solid CP ( Central Province ) teak wood of approved shade with architecture element of specified size and thickness for different element for all the heights. The work shall be carried out as per design based on concept image with different process of carving (manual/ CNC machine). The intent for Wooden Statue work shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The wood to be fixed in line, Level and plumb including in all respect with the use of (SS 304 grade steel) supporting cramps, screws,pins /metal framing, concealed fastners,interlocking system, adhesive material ( as per directed by employer's and Engineer's representative ) of approved make with matching pigment as required and as approved by the architect of employer's and Engineer's representative. Wooden Frame to be smooth finished with optional staining or natural varnish for enhanced appearance as per directed by Employer's/ Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer's/ Engineer's representative. Contractor shall prepare and submit shop drawings & 3d views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's / Engineer's representative requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, Seasoning and kiln drying treatment, Anti- termite and anti- fungal treatment, polishing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps,screws, pins /metal framing, nuts, bolts, fastners,epoxy or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of wood cladding installation.A) Solid Wooden Statue : height : 96" inch. Width & length as per site requirment.
TOTAL B2
B3: Decorative
B3: Decorative GRC CEILING GRC Work Providing and fixing of carved GRC ceiling panels, made from high-quality Glass Reinforced Concrete, including molding, shaping, and intricate carving as per approved design. GRC product mixture of 40% White Cement, 40% Fine Aggregates, 0.4% Plasticizers, 4% Polymers, 11.5%-14% Water, and 3.5%-4% of AR Glass Fiber.Glass fibre shall be an alkali-resistant, continuous filament fibre developed and formulated specifically to have high strength retention in Ordinary Portland Cement environments. The glass fibre shall have a minimum ZrO2 content of 16% by weight, in accordance with internationally recognised standards.The panels shall have a minimum thickness of 12 mm with reinforcement to ensure structural stability and durability. The surface shall be finished with (smooth/texture/painted) as per architectural requirements.The work shall be carried out as per design based on concept image. The intent for GRC ceiling shown are indicative/ tentative and may vary to the extant of pattern/ design/ carving etc as shown in intent image or view. The GRC ceiling to be fixed in line, Level and plumb including in all respect with the use of metal framing (Galvanized Steel (GI): 1.2 - 1.5mm thick (minimum Z120 coating),Aluminium Sections: 1.5 - 2mm thick, Main channel: 38mm x 25mm x 1.2mm GI/Aluminium sections,Suspension: GI wire rods (Ø4mm) ,Cross tees: 25mm x 25mm x 1.2-1.5 mm GI/Aluminium sections,L-shaped GI/Aluminium angle (50mm x 50mm x 1.5mm) ), Concealed fastners: Self-tapping screws (SS/MS): 8mm diameter, corrosion-resistant Countersunk head screws, Expansion anchors: Ø6mm or Ø8mm, expansion fasteners (Ø6mm x 50mm length), sealent ( as per directed by employer's and Engineer's representative ) of approved make with matching pigment as required and as approved by the architect of Employer. GRC ceiling surface to be smooth finished as per directed by Employer's/ Engineer's representative. All the work shall be executed as per architectural drawing and details as per sample approved by Employer. Contractor shall prepare and submit shop drawings & 3D views based on the concept drawings for approval before starting the work. Shop drawing shall contain all the final execution details in AutoCAD drawings of all the elements and ornamental works. As per Employer's requirment, Contractor shall prepare mock-up of required size at the project location or as agreed by the employer with approved sample of material , as per approved shop drawing & 3d views.The rate shall be inclusive of all the material, labour, including all applicable taxes (excluding gst), transportation, Fixing, cranes, machines, tools, tackles, equipment’s, Wastage, polishing, finishing, cleaning, maintaining up till handling over the project complete. The rate shall also include supporting cramps,screws, pins /metal framing, nuts, bolts, fastners,sealent or adhesive material etc and supply of scaffolding material & installation as well as dismantling of scaffolding material in safe manner as per the requirements of GRC ceiling installation.
TOATL (B1+B2+B3))
TOATL (A+B)
Part-C : Novated Works
Coordination charges for Novation works of approx. INR 130 Cr. under EPC-2 Contract [Srishti Gallery+ Holding Area, Shri Yantra - Light & Sound Show,Nauka Vihar+Holding Area]
TOTAL PART C
TOATL (A+B+C)
Tata Projects Limited (BID ID -1298797)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.12 MB
Tendernotice_1.pdf
PDF • 0.32 MB
22Schedule05TendeDrawingsSTONEPart01.rar
Tender Documents • 31.87 MB
23Schedule05TenderDrawingsSTONEPart02.rar
Tender Documents • 25.53 MB
24Schedule05TenderDrawingsSTONEPart03.rar
Tender Documents • 34.51 MB
25Schedule05TenderDrawingsELECTPart01.rar
Tender Documents • 28.74 MB
26Schedule05TenderDrawingsELECTPart02.rar
Tender Documents • 23.17 MB
27Schedule05TenderDrawingsELV.rar
Tender Documents • 17.51 MB
28Schedule05TenderDrawingsFireFightingKitchen.rar
Tender Documents • 26.59 MB
29Schedule05TenderDrawingsHVACPHESTR.rar
Tender Documents • 32.87 MB
02SEC01toSEC04Part2.rar
Tender Documents • 32.69 MB
32Schedule05AUTOCADDrawingsARCHPART01.rar
Tender Documents • 18.60 MB
03SEC01toSEC04Part3.rar
Tender Documents • 34.86 MB
04Section05EmployerRequiremenSchedule01GeneralScope.rar
Tender Documents • 3.86 MB
05Schedule01APPENDICESPART1.rar
Tender Documents • 32.87 MB
33Schedule05AUTOCADDrawingsARCHPART02.rar
Tender Documents • 25.69 MB
06Schedule01APPENDICESPART2.rar
Tender Documents • 5.93 MB
34Schedule05AUTOCADDrawingsARCHPART03.rar
Tender Documents • 23.57 MB
07Schedule02ItsAppendices.rar
Tender Documents • 26.70 MB
35Schedule05AUTOCADDrawingsARCHPART04.rar
Tender Documents • 16.41 MB
36Schedule05AUTOCADDrawingsARCHPART05.rar
Tender Documents • 21.78 MB
08Schedul03DBRsPart1.rar
Tender Documents • 24.48 MB
37Schedule05AUTOCADDrawingsARCHPART06.rar
Tender Documents • 24.80 MB
09Schedule03DBRPart2.rar
Tender Documents • 17.86 MB
10Schedule03DBRAppendices.rar
Tender Documents • 12.13 MB
11Schedule04TechnicalSpecifications.rar
Tender Documents • 8.22 MB
12Schedule04ListofMakes.rar
Tender Documents • 3.87 MB
14Schedule05TenderDrawingsARCHPart02.rar
Tender Documents • 34.62 MB
15Schedule05TenderDrawingsARCHPart3.rar
Tender Documents • 33.85 MB
16Schedule05TenderDrawingsARCHPart04.rar
Tender Documents • 30.21 MB
17Schedule05TenderDrawingsARCHPart05.rar
Tender Documents • 24.31 MB
38Schedule05AUTOCADDrawingsARCHPART07.rar
Tender Documents • 32.49 MB
18Schedule05TenderDrawingsARCHPart06.rar
Tender Documents • 17.93 MB
19Schedule05TenderDrawingsARCHPart07.rar
Tender Documents • 30.15 MB
39Schedule05AUTOCADDrawingsARCHPART08.rar
Tender Documents • 29.73 MB
20Schedule05TenderDrawingsARCHPart08.rar
Tender Documents • 34.62 MB
40Schedule05AUTOCADDrawingsARCHPART09.rar
Tender Documents • 19.65 MB
21Schedule05TenderDrawingsARCHPart09.rar
Tender Documents • 34.19 MB
41Schedule05AUTOCADDrawingsLANDSCAPEPART01.rar
Tender Documents • 17.81 MB
43Schedule05AUTOCADDrawingsSTRUCTUREZone02.rar
Tender Documents • 18.46 MB
44Schedule05AUTOCADDrawingsSTRUCTUREZone05and07and08.rar
Tender Documents • 24.32 MB
45Schedule05AUTOCADDrawingsSTRUCTUREZone01.rar
Tender Documents • 21.00 MB
46Schedule05AUTOCADDrawingsELECTRICAL2NDFLOORPart01.rar
Tender Documents • 9.55 MB
47Schedule05AUTOCADDrawingsELECTRICAL2NDFLOORPart02.rar
Tender Documents • 10.40 MB
49Schedule05AUTOCADDrawingsELECTRICALUPTO1STFLOOR.rar
Tender Documents • 23.50 MB
50Schedule05AUTOCADDrawingsHVACPart01.rar
Tender Documents • 11.44 MB
51Schedule05AUTOCADDrawingsHVACPart02.rar
Tender Documents • 10.30 MB
52Schedule05AUTOCADDrawingsFIREFIGHTINGPart01.rar
Tender Documents • 5.29 MB
53Schedule05AUTOCADDrawingsFIREFIGHTINGPart02.rar
Tender Documents • 4.34 MB
54Schedule05AUTOCADDrawingsFIREFIGHTINGPart03.rar
Tender Documents • 4.46 MB
55Schedule05AUTOCADDrawingsELVPart01.rar
Tender Documents • 4.97 MB
56Schedule05AUTOCADDrawingsELVPart02.rar
Tender Documents • 5.26 MB
57Schedule05AUTOCADDrawingsELVPart03.rar
Tender Documents • 3.97 MB
58Schedule05AUTOCADDrawingsKITCHEN.rar
Tender Documents • 8.51 MB
01SEC01toSEC04Part01.rar
Tender Documents • 30.56 MB
BOQ_504412.xls
BOQ • 0.56 MB
30Schedule05TenderDrawingsLandscape.rar
Tender Documents • 16.83 MB
31ETABMODELZONE05FORREFERENCEONLY.rar
Tender Documents • 3.09 MB
42Schedule05AUTOCADDrawingsLANDSCAPEPART02.rar
Tender Documents • 28.07 MB
13Schedule05TenderDrawingsARCHPart01.rar
Tender Documents • 9.55 MB
48Schedule05AUTOCADDrawingsELECTRICAL3RDFLOORTERRACE.rar
Tender Documents • 9.11 MB
Download all tender documents and submit your bid