Providing Development works for the construction of 1 INS, 3 SI and 46 PC/HC quarters for Thirupathur Nagar Police Station at Thirupathur in Sivagangai District (Re tender)

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

1.8) Earth work excavation in SDR for Open foundation (excluding refilling) b. 2 to 3 mt.

2.6) Supplying and filling with 40mm HBSJ

2.7) Supplying and filling with 20mm HBSJ

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

53.3) Supplying and fixing of C.I. steps (5 Kg)

Annexure 2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture

3.3.1) P.C.C. 1:8:16 using 20 mm broken brick jelly using crushed stone sand

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture a. In Foundation and basement

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 40mm thick a. In Foundation & Basement

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

50.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand

53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)

58.5) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

71.2) Supplying and fixing of 32 Amps triple pole main switch

80.1) Supplying and fixing of 450x375x20mm T.W. plank with 3 Nos. of 100 Amps 500 V bus bar type Ariel fuse

84.4) Run of Main 4 wires of 6 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

110) Supplying and fixing of Single Pole MCB 6A to 32A, 10KA

110.1) Supplying and fixing of four pole 40 Amps 30 MA RCCB / ELCB - Lower end

114) Supplying and delivery of following PVC Aluminium armoured LTUG cable a) 3.5 core 50 Sqmm PVC Aluminium armoured LTUG cable

b) 3.5 core 35 Sqmm PVC Aluminium armoured LTUG cable

115) Labour charges for laying of 3.5 core 35 Sqmm and 3.5 core 50 Sqmm PVC Aluminium armoured LTUG cable below ground level

116) Labour charges for laying of 3.5 core 50 Sqmm PVC Aluminium armoured LTUG cable above ground level

117) Supplying and fixing of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 50 Sqmm brass cable gland

b) 3.5 core 35 Sqmm brass cable gland

117.2) Supplying and fixing of cable clamps upto 95 Sqmm

119) Supplying and delivery of 1 HP submersible pumpset at borewell (Three phase) Duty - 50 lpm x 40m

119.1) Supplying and delivery of 2 HP submersible pumpset at borewell (Three phase) Duty - 50 lpm x 75m

119.2) Supplying and delivery of 3 HP open well submersible pumpset three phase circuit unit Duty - 50 lpm x 60m

120.1) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP

121.1) Supply and delivery of Direct online starter three phase panel board with two level guard and auto start 3 HP

121.2) Supply and delivery of Direct online starter three phase panel board with two level guard and auto start 1 HP and 2 HP

122) Supplying and fixing of following dia of the PVC, CI, GI & GM specials a) 32mm dia GI Bend

b) 32mm dia CI adopter

c) 32mm dia GI Coupling

d) 50mmx40mm GI Tee

e) 50 mm dia GI Coupling

f) 50 mm dia GM Gate valve (Heavy duty)

g) 50 mm dia GM Non Return valve

h) 50mm dia GI Union

i) 50mm dia GI Hex Nipple

j) 50 mm dia GI Tee

k) 32mm dia GI Union

l) 32mm dia GI Elbow

m) 32mm dia GI Hex Nipple

n) 25mm dia GI Coupling

o) 25mm dia GI Union

p) 25mm dia GI Elbow

q) 25mm dia GI Nipple

r) 50mm dia PVC Coupling

s) 50mm dia PVC Union

t) 50mm dia PVC Elbow

u) 50mm dia PVC Nipple

v) 65mm dia GI Bend

w) 65mm dia GI Coupling

x) 65mm dia GI Elbow

y) 65mm dia GI Bend

z) 65mm dia GI Coupling

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset

124) Supplying and fixing of following dia GI pipes 'B' class in position a) 65mm dia GI pipe

b) 50mm dia GI pipe

124.1) Supplying and laying including Labour charges for laying of GI pipe below ground level a) 25mm dia GI Pipe

b) 40mm dia GI pipe

c) 50mm dia GI pipe

d) 100mm dia GI pipe

125.1) Supplying and laying PVC pipe 10 Kg/cm2 a) 50mm dia (inner) PVC Pipe

b) 32mm dia PVC pipe

126.1) Supplying and fixing of following dia M.S. Clamp set a) 150 mm dia MS clamp set

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

129) Supplying and fixing of Stainless steel TNPHC Emblem (15")

130) Supplying and fixing of Aluminium die cast letters of size a) 12" height letters

b) 9" height letters

c) 4" height letters

132.2) Drilling of borewell to a size of 150mm dia to the required depth as directed including cost Rig, Fuel etc., complete a) Upto 150m

b) 151m to 180m

c) 181m to 220m

133) Supplying and delivery of following dia PVC casing pipe as per IS 12818/2010 a) 150mm dia PVC Casing Pipe of 6 Kg/cm2

134) Supplying and delivery of 160mm dia PVC end cap

134.2) Supplying of following dia UPVC column pipe for Borewell a) 32mm dia UPVC column pipe

139) Supplying of Godrej Navtal 7 Levers Lock with - 3 Keys

158) Supplying and fixing of Metering Panel for 10 services

158.1) Supplying and fixing of Metering Panel for 8 services

158.2) Supplying and fixing of Metering Panel for 4 services

158.3) Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection

160.1) Supplying and fixing of Rotary switch / Handle

RAMACHANDRAN SADEESH

M K SARAVANAN