GE(S) BTD TOKEN NO 28 OF 2021-22 REPAIR REPLACEMENT OF INTERNAL UNSERVICEABLE POINT REWIRING FITTINGS FIXTURES DBS SUB MAIN WIRING SWITCHES AND CONNECTED ACCESSORIES WORK IN NILGIRI ENCLAVE UNDER GE(S) AT BATHINDA MIL STN (2nd CALL)

Amount

Taking down carefully existing copper point wiring (light/fan/sockets) complete with all accessories such as switches sockets ceiling rose, wall bracket etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface etc complete all as specified and directed.

M&L point wiring for one light point / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia, medium duty, ISI marked including modular frame ,plate,new steel terminal sunken boxes suitable for modular switch/socket flush to surface for modular frame and cover plate for fixing of modular switches as per requirement one light point, fan point , controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm multi stranded copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) and finishing the surface to match with existing surface etc complete all as specified and directed. (Note :- Switches, sockets etc shall be measured and paid separately).

All as per srl item No. 2.00 (here-in-before) but for one 5 pin socket out let 5 Amp on same board complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for one 5 pin socket out let 5 Amp on independent board complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed.

All as per srl item No. 2.00 (here-in-before) but for call bell point complete all as specified and directed.

All as per item No 2.00 (here-in-before) but for but one light point controlled by two switches two way complete all as specified and directed.

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia medium duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed.(Note :- Switches, sockets etc shall be measured and paid separately).

All as per item No 08.00 but for socket 5 Pin, 5 Amp 230 Volt on same board complete all as specified and directed.

All as per item No08.00 but for one socket point outlet 3 Pin, 5 Amp 230 Volt on independent board complete all as specified and directed.

All as per srl item No. 08.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed.

All as per srl item No. 08.00 (here-in-before) but for call bell point complete all as specified and directed.

All as per item No 08.00 (here-in-before) but for but one light point controlled by two switches two way complete all as specified and directed.

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in existing conduit, and existing sunken boxes but including 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed by Engineer-in-charge.(Note :- Switches, sockets etc shall be measured and paid separately).

All as per item No 14.00 but for socket 5 Pin, 5 Amp 230 Volt on same board complete all as specified and directed.

All as per item No 14.00 but for one socket point outlet 3 Pin, 5 Amp 230 Volt on independent board complete all as specified and directed.

All as per srl item No. 14.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed.

All as per srl item No. 14.00 (here-in-before) but for call bell point complete all as specified and directed.

S& F modular type switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed

S& F in repair modular type switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) two way etc complete all as specified and directed.

S&F in repair modular one socket 5 Pin 5 Amp 240 volts AC complete all as specified and directed. Note:- Switch and socket shall be of same make.

S& F modular type switch piano flush type, 16 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed.

S&F in repair modular one socket 6/ 16 Amp 240 volts AC complete all as specified and directed. Note:- Switch and socket shall be of same make.

S&F in repair modular 5 Step Fan regulator 2 Module 240 Volt, AC (ISI Marked) suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F in repair modular bell push switch 240 Volt, AC (ISI Marked) all as specified and directed by Engineer-in-Charge.

S& F switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed.

S& F switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) two way etc complete all as specified and directed.

S&F socket 5 Amp 5 pin 230 volts AC Complete all as specified. Note:- Switch and socket shall be of same make complete all as specified and directed.

S& F switch piano flush type, 16 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed. Note:- Switch and socket shall be of same make & Model.

S& F Socket outlet flush type, 16 Amp 240 Volt, AC (ISI Marked) complete all as specified and directed. Note:- Switch and socket shall be of same make & Model.

S&F bell push,5 Amp, 230 V, AC etc complete all as specified and directed.

S&F deluxe fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified and directed.

S&F Lamp holder angular type PVC / Polycarbonate type complete all as specified and directed.

S&F call bell ding type, AC, 230 V etc complete all as specicied and directed.

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 8 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete and finishing the surface with the help of sand and cement as per site requirement complete all as specified and directed.

All as per item No 36 (here-in-before) but TPN 4 way Make : Ekinoxe Cat Part No.607715 or equivalent model No. of Legrand/L&T/ Schnider/Havells including taking down complete and finishing the surface with the help of sand and cement as per site requirement complete all as specified and directed.

S&F Isolator four pole 100 Amps complete all as specified and directed.

S&F MCB TPN 63 Amps C curves MCB repturing capacity 10 KA etc complete all as specified and directed.

S&F MCB SPN 40 to 63 Amps c curves MCB repturing capacity 10 KA etc complete all as specified and directed. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

S&F MCB 5 Amp to 32 Amp SP capacities 'C' series 10KA rupturing capacaity complete all as specified and directed. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor FR-LSH cable of size 6 sqmm, 1100 votls grade drawing through and including concealed conduit 20 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed including taking down old unserviceable wiring. (Note:- Three lengths of 6 Sqmm cable will be measured as one length).

S&F sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm in existing PVC conduit pipe and including 6.0 sqmm copper conductor single core wire connected by common earth all as specified.( Three lengths of 6 Sqmm cable will be measured as one length).

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burred in ground vertically earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of GI nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate upto 5 mtr and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion.

S&F blanking plate etc complete all as specified and directed.

S&F in repairs call bell ding type, AC, 230 V etc complete all as specicied and directed. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

Supply and fixing single pole and neatural encolsure with a two pin and earth plug with socket complete with one single pole MCB 20 Amps and 240 Volts complete all as specified and directed.

Supply and fixing in repair/replacement of MCCB four pole, 63 Amps rupturing capacity 16 KA, 415 V, 50 Hz complete all as specified and directed.

Supply and fixing in repair/replacement of MCCB four pole, 100 Amps rupturing capacity 16 KA, 415 V, 50 Hz complete all as specified and directed.

Supply and fixing in repair/replacement of MCCB four pole, 160 Amps rupturing capacity 25 KA, 415 V, 50 Hz complete all as specified and directed.

S&F LED light fitting, 34/36 watts New generation energy saving and environment friendly long life LED EDGE LIT luminaire of size 595 x 595 mmm suitable forarmstrong grid ceiling complete all as specified and directed. The driver should be procured separatly but the qupting rate should be inclusive of both fitting and driver.

S&F LED Bulk head fitting energy saving new generation 6.5 W LED enclosed with poly coarbonate cover 6000K with IP65 protection, the system wattage of fitting should not be more than 5 watt ± 10%, surge protection of minimum 2KV, power factor should be more than 0.90, cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 900 lumens, total input voltage range 140-280V AC, colour rendering Index should not be less than 80complete providing all electrical connection complete all as specified and directed. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

S&F decorative wall mounting light fixture city-1 made up of poly carbonate with 7 watt LED bulb ( B-22 base) complete all as specified and directed. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

S&F surface mounted round LED downlight with ALdie cast body , finish with drop down PC diffuser to deliver low glare illumination with optimized heat shink for efficient heat dissipation the system wattage of fitting should not be more than 6 watt ± 10%, surge protection of minimum 2KV, power factor should be more than 0.90, cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 540 lumens, total input voltage range 140-280V AC, colour rendering Index should not be less than 80 complete with all light fitting connection and connecting with twin core 60 cm long copper conductor FR-LSH cable etc complete all as specified and directed. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

S&F LED light fitting, 1X25 watts complete with toughened glass IP66 with provn of suitable size GI bracket (01 No) and MS clamps (02 Nos) fixed to wall/ column including electrical connection providing 1.5 mtr long twin core round copper conductor cable of suitable size incl taking out old unsv

Supply and fixing integrated LED batten with white acrylic cover of 5 watt including connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete all as specified and directed. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

Supply and Fix REGAL Batten for LED tube with single LED Lamp 1x 20 w, Ultra bright glass LED Tubelight with very high efficacy suited for installation in T5/T8 fitting with lamp holders etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

S/F surface and wall mounted 9 watt LED batten with polycarbonate housing & integrated electronic driver 230V, 50Hz all as specified and directed by Engr--in-Charge. Note :- ARMAAN complaints should be attended on daily basis and no extra charges offered to fixing the same.

S& F Trim LED Panel Round aesthetically designed recessed mounted panel in a light weight plastic body of 3 W Ceiling cutout ø 42 mm, height 21 mm. Note :- ARMAAN complaints should be attended on daily basis and no extra charges offered to fixing the same.

S& F Trim LED Panel Round aesthetically designed recessed mounted panel in a light weight plastic body of 10 W Ceiling cutout ø 107 mm, height 22 mm. Note :- ARMAAN complaints should be attended on daily basis and no extra charges offered to fixing the same.

S/F LED Tube rod ecofriendly, 20W(+/- 10%) polycarbonate body, 1.20m length, LED T8 (tubular lamp), 6500K, G13, 230V, 50Hz all as specified and directed by Engr--in-Charge. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

S & F in repairs/replacement of the following Srl No. 63 to 83 items complete all as specified and directed by the Engr in charge. Note :- AARMAN complaints should be attended on daily basis and no extra charges offered to fixing the material through AARMAN complaints

S & F in repair Switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed.

S&F in repair Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F in repair Hylam sheet cover 3mm thick of size 125mmx125mm complete with machine screw/ washer etc complete all as specified

S&F in repair Hylam sheet cover 3mm thick of size 125mmx200mm complete with machine screw/ washer etc complete all as specified

S&F in repair Hylam sheet cover 3mm thick of size 200mmx275mm complete with machine screw/ washer etc complete all as specified

S&F in repair MS Sunken box of size 100mmx100mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S&F in repair MS Sunken box of size 100mmx175mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S&F in repair MS Sunken box of size 175mmx250mm with approved depth & thickness complete with earth dolly including making good the disturb surfaces CM (1:3) to match the existing complete all as specified

S& F in repair modular type switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) two way etc complete all as specified and directed.

S&F in repair modular one socket 5 Pin 5 Amp 240 volts AC complete all as specified. Note:- Switch and socket shall be of same make.

S&F in repair modular one socket 6/ 16 Amp 240 volts AC complete all as specified. Note:- Switch and socket shall be of same make.

S&F in repair modular 5 Step Fan regulator 2 Module 240 Volt, AC (ISI Marked) suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F in repair modular bell push switch 240 Volt, AC (ISI Marked) all as specified and directed.

S& F modular plate four Module complete all as specified and directed.

S& F modular plate five Module complete all as specified and directed.

S& F modular plate six Module complete all as specified and directed.

S& F modular plate eight Module complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit of Rs. 65939.00.

M/s SUPERTECH ENGINEERS

NASIB ENGINEERS AND CONSTRUCTION