Tender for Repairing of Rainout Shelter at Hiraj Farm of ICAR-NRCP, Solapur

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and 6.19 Cum

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 1.94 Cum

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer Incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 16.29 Cum

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 2.24 Cum

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stone in cement mortar 1:3 in basement with patent water proofing compound added to it at rate of 1Kilogramper bag of cement including bailing out water manually, scaffolding racking out joints when plastering is to be done and watering etc. complete. 6.14 Cum

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 1.07 Cum

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 1.77 Cum

Providing Autoclaved Aerated Concrete Block masonry of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of Fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) 24.45 Cum

Providing and casting in situ lintels and chhajja as per detail drawing and design including reinforcement and M20 grade concrete, curing finishing complete and as directed by engineer in charge and up to his satisfaction. 5.00 Nos.

Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. 119.66 Sqm

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete 119.66 Sqm

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. 119.66 Sqm

Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineer Incharge with all necessary aluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 Kilogram/One Square Metre is considered. 7.43 Sqm

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (Excluding the primer coat) etc. complete. 119.66 Sqm

Providing and applying two coats of exterior acrylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. 119.66 Sqm

Treads and risers for brick steps in rough shahabad stone 20.00 Sqm

Providing and fixing rolling shutter with box including fitting and oil painting two coats etc complete. 4.25 Sqm

Removing existing flooring and cleaning and levelling the floor Lumpsum

Providing and laying in position cement concrete M20 grade, for flooring and applying trimix treatment to the concrete floor including shuttering, curing and all required work and as directed 6.80 Cum

Nitin Maruthi Nanavre (BID ID -3297331)

Shinde Suraj Dadasaheb (BID ID -3297240)

Venture Engineers and Contractors (BID ID -3297243)