REPAIR/REPLACEMENT OF AC SHEET, TILING, PLUMBING, CHAJJA, TOILETS, JOINERY AND OTHER MISC B/R WORKS AT GRTE, CENTRAL AMENITIES, C ZONE AND OTHER UNITS UNDER AGE B/R-II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Taking down cement plaster on brick or concrete surface etc including racking out joints, hacking for key, scrubbing down with water etc including removing the item obtained from taking down to a distance exc 1.50 km but not exceeding 5.00 Km out side MD land complete all as specified and as directed.

M&L for rendering 10mm thick on concrete surfaces of ceiling/Chajja/Facia of chajja etc in cement morter 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

BLANK

M&L rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finishing the surfaces fair and even without using extra cement complete as specified and directed.

M&L rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finishing the surfaces fair and even without using extra cement mixed with water proofing compound as per manufacture instructions complete as specified and directed. (Note : WPC shall be measured and paid separately).

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed with neat finish (using extra cement) to plastering mixed with water proofing compound as per manufacture instruction for shaft etc complete all as specified and directed (Notes : WPC shall be measured and paid seperately )

Dismantling floor, hearth or wall tiling including cement mortar bedding(But not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick (squares/rectangular polished) area of each tile not exceeding 0.36 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M&L for Non Skid ceramic tiles (colour) of size 400X400X 7 to 8 mm thick, (square / rectangular) area as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M&L for glazed ceramic tiles coloured of size 450 x 350 x 6 to7mm thick as in dado, skirting, riser to steps, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor over 20mm thick screed bed of CM 1:6 etc complete all as specifed and as directed.

M&L for granite (of any type) stone slab 16 to 18mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed of 15mm thick screed bed of CM 1:4 jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar, 15mm thick cement mortar 1:4 laying floor finishes etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and directed.

Dimantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S&F 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and as directed

Ditto all as per item no 18.00 above but except sheet complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F Pre-painted coloured plain profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-W (Gde -E-250) quality 'B' includng welding or riveting etc complete all as specified and directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde - E-165 etc complete all as specified and directed.

S&F Hard drawn steel wire fabric in available size weight not exc 4.00 Kg /sqm fixed in tank caging including welding, riveting, framing etc complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, Fe-410-W (Gde -E-250) quality 'A', drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness incl cover fillets, frame GI/Aluminium etc complete all as specified and directed.

S&F Decorated PVC False ceiling of size 600mmX600mmX5mm thick (±0.25) plain PVC sheet of 600 Kg/Cum density manufactured by an ISO-9000 certified company, used as a panel insert in a frame work made using GI T-section of size 25mmX25mm of 19 gauge or 1mm thick in square pattern of grid size 600mmX600mm. The aluminum frame work is supported from the ceiling with the help of J Hook or 4 mm GI wire of required size to maintain the proper levels etc. The aluminum frame work is supported on side wall with the use of aluminum L section of size 25mmX25mm of 19 gauge or 1mm thick angles etc. complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters) from the frame area n.exc 1.5 sqm etc including removing complete all as specified and as directed.

Taking down chowkats or frames with shuters (without taking of shutters) from the frame area exc 1.5 sqm but n.exc 4 sqm etc including removing complete all as specified and as directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete all as specified and as directed

S&F for Pressed Steel frames 1.25mm thick for doors of size 165x60mm with one or more rebates for double shutter including necessary fixing lugs, hinges, lock strike plate, etc, all as specified.

S&F for Pressed Steel frames 1.25mm thick for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, all as specified.

S & F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

M&L for cement concrete type C1 1:3:6 (20mm graded aggregate) as in holdfast/hollow portion of steel frame filling etc complete all as specified and as directed.

S&F of 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

BLANK

S&F of 25mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L 19/20mm thick Pre laminated exterior grade both sides laminated with decorative choice laminations fixed with screw to timber frame as in cupboard shutter, shelve, kitchen cabinet etc complete all as specified and as directed

S&F Decorative fancy type drawer handle for kitchen kabinate handle of 200mm long complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core complete all as specified and directed.

S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be approved by Garrison Engineer as in frame , shutters for Door/Windows / Ventilators, fixed/openable/sliding or any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and stainless steel wirecloth, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wirecloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid.

S&F standard anodized aluminium section and shall be approved by Garrison Engineer as in frame for partition, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and stainless steel wirecloth and particle board, etc complete all as specified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and particle board shall be measured and paid separately under respective items. (iii) The accessories required to be provided for partition as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid.

S&F for Steel window with side hung shutters including hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

Ditto all as per item no 45.00 above but without glazing bars complete all as specified and directed.

S&F for Steel ventilator with top hung shutters including hinges and steel peg stay complete complete all as specified and directed.

Making good steel windows Z section by taking down and refixing including cutting/welding if required and made good to smooth functioning including replace of minor fittings (hinges, handle, stay etc.) of the window complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 4.00 mm thick figured glass, pin headed and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 5.50 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F stainless steel wire cloth galvanised 0.36mm nominal dia avg width of aperature 1.40mm fix with tinned pack or galvanised wire staple incl all cutting, wastage complete for door only etc completed all as specified and as directed.

S&F in repair stainless steel wire cloth galvanised 0.36mm nominal dia avg width of aperature 1.40mm fix with tinned pack or galvanised wire staple incl all cutting, wastage complete for door only etc completed all as specified and as directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F Mild steel butt hinges heavy weight cold roled 100mm long etc complete all as specified and as directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

M&L Reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto all as per item No. 65.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, canopies, deck slabs and shelves and the like complete

M&L RCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate as in chajjas, shelves complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M&L for brick work with Fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 etc complete all as specified and as directed.

Ditto all as per item No. 74.00 here-in-before but except bricks.

M&L for brick work with Fly ash bricks straight or curved on plan exc 6m mean radius built in half brick wall in cement mortar 1:4 etc complete all as specified and as directed.

Ditto all as per item No. 76.00 here-in-before but except bricks.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 25 mm dia bore complete all as specified and as directed

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Re-fixing of serviceable galvanised iron tubing 15mm bore and connection in new or old position (wall, ceiling floors etc) with new fitting as required including cleaning of pipes obtained item No. 78.00 above complete all as directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Re-fixing of serviceable galvanised iron tubing 20mm bore and connection in new or old position (wall, ceiling floors etc) with new fitting as required including cleaning of pipes obtained item No. 79.00 above complete all as directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, with all fitting and fixed complete to walls and ceilings or laid in floors, 25mm bore complete all as specified and directed.

Re-fixing of serviceable galvanised iron tubing 25mm bore and connection in new or old position (wall, ceiling floors etc) with new fitting as required including cleaning of pipes obtained item No 80.00 above complete all as directed.

Dismantling water tanks and removing to site exc 250 and not exc 500 ltr capacity complete all as specified and directed.

Dismantling water tanks and removing to site exc 500 and not exc 1000 ltr capacity complete all as specified and directed.

S&F rotational moulded PVC water storage tank 500 ltr capacity conforming to IS 12701 (1989) cylindrical vertical type multi layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

S&F rotational moulded PVC water storage tank 1000 ltr capacity conforming to IS 12701 (1989) cylindrical vertical type multi layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) etc complete all as specified and directed.

S&F 25 mm Gun metal, globe or gate valves with iron wheel heads, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20 mm Gun metal, globe or gate valves with iron wheel heads, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.

S&F in repairs vitreous china wash hand basin flat back basin white size 550x400mm (Oval shape) excluding taps but including CP waste coupling 32mm bore, wase pipe 610 long etc a pair of MS bracket and cutting for pinning in ends of brackets complete all as specified and directed.

S&F for Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

M&L for Vitreous China wash down water closet pan (pedestal pattern, European type), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., complete including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe. (Make: Hindware or Parry)

S&F PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately)

Supply only water proofing compound (Liquid) complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C1 using 20 mm graded stone aggregate for plinth protection, Sub base of flooring fair finished etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregates, 25mm thick as in sub base of flooring etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregates, 50mm thick as in sub base of flooring etc complete all as specified and directed.

M&L for sand filling under floors including spreading, levelling and well ramming watering and consolidation complete all as specified and directed.

M&L for PCC (1:3:6) Type C1 using 20 mm graded stone aggregate as in surface channel & drain including form work complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc., complete all as specified and directed

M&L for coloured machine pressed precast concrete interlocking block any shape and size set conforming to IS 15658-2006 of 60mm thickness,M-35 Grade & jointed with grey cement and pigment complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc. complete all as specified and directed

S&F in repairs stainless steel decorative curtain rod of 25 mm bore complete all as specified and directed.

S&F in repairs stainless steel decorative curtain brakets and end cap complete all as specified and directed.

S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

Ditto all as per item No. 114.00 here-in-before but tap 2 in 1 of 15mm bore complete all as specified and directed. (Make : Marc or equivalent)

S&F in repair stop valves /angle valves fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed CAT NO BS -76 of prayag or equivalent model of JAQUAR

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

S&F 50 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and directed

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

Taking down PVC drain pipes ( any size or pattern) including all fittings head shoes etc complete all as specified and directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed on wall, complete all as specified and directed.

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed on wall, complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed.

S&F PVC (SWR) junction T (single (single T ), equal or unequal 110mm dia with acess door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore fixed in position complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, upto 100mm bore jointed in cement mortar and taking out of trenches, if required

S&F in repair for 75 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and directed

S&F in repair for 100 mm bore Cast iron soil, waste and vent pipes(spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and directed

S&F 75mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and directed

S&F 100 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and directed.

S&F in repair for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 etc. complete all as specified and directed.

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing WPT felt beyond the MOD premises etc complete all as specified and directed.

M&L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications, complete all as specified and directed :- (a) applying oil bound bitumen primer @ 0.40 littre/Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centrigrade on the prepared dry surface. (b) Laying 4mm thick APP modified water proofing polymeric membrane reinforced with non woven polyester fibre using butane torch by torch application with 10 cm side lap and 15 cm end lap. (c) Physical properties of membrane shall be as under: (i) Membrane weight not less than 4.00 Kg/Sqm. (ii) Non woven polyester weight not less than 4.00 Kg/Sqm. (iii) Softening point of membrane not less than 150 degree celsius. (iv) Joint tensile strength-longgitudinal not less than 650N/Sqcm and transverse not less than 450N/Sqm. (v)Tear strength -longitudinal not less than 300 N and transverse not less than 250N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/ water tightness at at 2 Kgf/cm2 (viii) Water absorption, % - Not more than 0.15. (ix) Cold flexibility -(-) 5 degree C (x) Dimentional stability % change = Max 1% (xi) Heat resistance - Does not drip at 120 degree C.

M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm over APP membrane, complete all as specified and as directed.

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing new plastered surface of ceiling surface and applying two coats of white wash etc complete all as specified and directed.

M&L for applying one coat of white washing (Lime wash white) on ceiling surfaces including preparation of old decorated plastered /unplastered surface of ceiling by brooming down,scrapping cleaning & removing down smoke soot, moulds, moss and efflorescence etc complete all as specified and directed.

M&L for applying one coat of white washing (Lime wash white) including prepration of old decorated plastered/ unplastered surface of walls by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed

Ditto all as per item No. 146.00 here-in-before but two coat of white wash etc complete all as secified and directed.

M&L for preparing new or old plastered surface of walls with two coat Birla/Asian wall care Putty and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed.

M&L for applying one coat of oil emulsion distemoer (oil bound distemper) of any tint including preparation of surfaces of walls on old decorated plastered/unplastered surfaces by washing/rubbing down and scrapping old loose material,smoke,soot,moulds,moss and efflorence etc including filling and stopping the rough surface/nail holes with white cement/POP/wall putty complete all as specified and directed.

Ditto all as per item No. 149.00 here-in-before but two coats of distemper oil emulsion.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soots, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or plaster of paris and applying one coat of plastic emulsion paint, white or tinted complete all as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered/ unplastered surfaces of wall etc., and applying two coat of cement base paint complete all as specified and directed.

M&L for preparing Old plastered surfaces of wall and applying one coat of cement base paint by brooming down, scraping, cleaning and removing smoke soot, moulds, moss and efflorescence complete all as specified and directed.

M&L for applying one coat of exterior emulsion weather coat paint including preparation of old decorated surface of wall by washing/rubbing down and stopping of /filling nail holes /rough surfaces with putty/plaster of paris complete all as specified and directed.

M&L for applying two coat of exterior emulsion weather coat paint including preparation of old or new decorated surface of wall by washing/rubbing down and stopping of /filling nail holes /rough surfaces with putty/plaster of paris complete all as specified and directed.

M&L for treating small articles such as stops, covers, hold fast etc area not exc 0.1 sqm each and treated with tar, coal tar or black paint. complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Asbestos cement two pieces adjustable serrated ridge for corrugated or semi corrugated sheets ridges 6 mm thick fixed with L type or J type or cranked bolt type etc complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work such as trust frame complete all as specified and directed. .

M&L for 2nd class hard wood as in scantling, clean sawn, in unframed work complete all as specified and directed.

Ditto all as per item No. 161.00 here-in-before refixed in old position except new wood for truss frame complete all as specified and directed.

Ditto all as per item No. 161.00 here-in-before but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section etc complete all as specified and as directed.

Material and labour for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails sectional area exceeding 13 sqcm but not exceeding 25 sqcm all as specified and directed.

Ditto all as per item No. 164.00 here-in-before but if in repairs or if refixed in old position except new wood for perlin and rafter.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance with pieces, cleats etc and fabrication works Fe-410-W (Gde -E-250) quality 'B' all as specified and directed.

M&L for rolled mild steel works in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc Fe-410-W (Gde -E-250) quality 'B' complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11 mm to 15 mm complete all as specified and as directed.

BLANK

S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

Ditto all as per item No. 170.00 here-in-before but fixing only.

S&F 4 mm thick plain Non asbestos fiber cement building boards, fixed or laid /inserted to timber /GI /Aluminium framework with screws complete all as specified and as directed.

Ditto all as per item No. 172.00 here-in-before fixed in repairing only.

M&L second class hard wood, 35 mm thick, plain framed panel shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board medium density fitted to chowkats or frames complete all as specified and as directed.

M&L for 35 mm thick well seasoned 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F in repairs, mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged in spikes, framed guard bars and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L hard stone tiles coloured of Size 600mm X 600mm X 15 to 16mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L hard stone tiles coloured of Size 600mm X 600mm X 15 to 16mm thick in riser and steps, skirting, dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L for 9mm thick Pre laminated partilcle board, interior grade, prelaminated both side with decorative choice laminations, fixed with screw to timber frame complete all as specified and as directed.

Desludging of 100 mm dia sewage line by roading or by other means from adjacent manhole complete all as directed.

All as per item No. 182.00 here- in- before but 150 mm.

All as per item No. 182.00 here -in -before but 200 mm.

Cleaning of blocked pipe from Floor trap/ Nahani trap, Gully trap, water closet upto First Manholes by removing the sludge/ mud for smooth functioning including cleaning of all and replacing in position old Floor trap & Gully trap Covers complete all as specified and directed.

All as per item No. 185.00 here- in- before but from manhole of depth exc 30 cm but n exc 100 cm

All as per item No. 185.00 here- in- before but from manhole of depth exc 100 cm and n exc 200 cm

Cleaning & clearing of septic tank mechanically with combined high pressure water jetting cum suction (vacuum) type machine mounted on LCV/HCV and having facilities of high pressure water thermoplastic fiber braided water jetting hose and through conical/round shape nozzler pipe and flushing after cleaning including removing the deposited sludge/ solid/ liquid material, outside MD land, complete all as specified and as directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 83751.85 (refer Tender Srl Page No 44). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S GENERAL TRADERS

M/S LAKPA LAMA

M/S Banerjee construction co

M/S BENGAL ENGINEERING ENTERPRISES

SREE SWAPAN KUMAR GHOSH

S K ENTERPRISE