Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.2 Craccepted-finance | ₹4.2 Cr | accepted-finance |
Tender Value
Refer Docs
EMD Value
₹4.7 L
Closing Date
2 Jan 2026, 8:30 pmClosed
Bengaluru Water Supply And Sewerage Board
Nalini M
Repair, Replacement of EMF flowmeters at South East division and various locations coming under AEE (UFW)subdivision.
BWSSB/2025-26/WS/WORK_INDENT2740/CALL-2
BWSSB/2025-26/WS/WORK_INDENT2740/CALL-2
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
BWSSB Head Office Bengaluru
10 documents required · 10 mandatory
List of existing commitments and ongoing works
List of works for which tenders already submitted
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
Executed in any one year the following minimum quantities of work.a) Providing and installation / repair & replacement of EMF flowmeter with Modbus communication 5 Nos EMF Flow meters.b).Providing and laying of copper control cable-1440 Mtrs.c).Providing and fixing of Steel work Framed work 7860Kgs.d).MS specials for pipeline 500mm and above -14880 Kgs.e).30 Months warranty conformation certificate from the OEM has to be uploaded in the tender.f).Tenderer should upload the OEM manufacturer authorization letter for the existing flowmeter spares compatibility and availability.
Should have Civil/Electrical Contractor registration in BWSSB or PWD/KUWSSB/KPTCL/CPWD/CEIG etc.,
Should have achieved in at least two financial years a minimum average financial turnover (in all classes of civil engineering construction works) of Rs.936.42 lakhs (Including GST).
Tenderer as prime contractor should have satisfactorily completed during the last five years at least one similar work to an extent of 25% of the cost of the work value not less than Rs 117.05 lakhs(Including GST)Repair, Replacement and installation of EMF flowmeters completed in all respects
Tenderer as prime contractor should have satisfactorily completed during the last five years at least one similar work to an extent of 50% of the cost of the work value not less than Rs.234.10 lakhs(Including GST) (Repair, Replacement and installation of EMF flowmeters completed in all respects).
Availability by owning 50% of the required / specified key & critical equipment for this work & remaining 50% can be deployed on lease / hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work shall be furnished.
Total value of civl engineering works executed and payments received in the last five years (year-wise)
Liquid assets and /or availability of credit facilities of no less than Rs.119 lakhs /-(Credit lines/letter of credit/certificates from Nationalized / Schedule banks in India for meeting the fund requirement etc.,
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Form of tender as per KW-4 has to be upload
₹5,000
₹4.7 L
2 Jan 2026
26 Dec 2025
3 Jan 2026
30 Dec 2025
30 Dec 2025
Repair, Replacement of EMF flowmeters at South East division and various locations coming under AEE (UFW)subdivision.
Providing, installation of power operated 250mm dia EMF meters as per site conditions & with hard rubber approved make to the water supply mains, Modbusoutput suitable for transferring flow data to th...
Providing, installation of power operated 350mm dia EMF meters as per site conditions & with hard rubber approved make to the water supply mains, Modbusoutput suitable for transferring flow data to th...
Painting the CI/ M.S/ D.I pipes and specials with two coats of bitumastic paint both inside and outside etc. complete - 250mm dia. Pipes.
350mm dia. Pipes.
900mm dia. Pipes.
Repair and servicing of M/s.Krohne marshall make flowmeters, Equipment type: Magflow meter OPTIFLUX Primary, Equipment name: OPTIFLUX DN 150 mm primary Head,
Repair and servicing of M/s.Krohne marshall make flowmeters, Equipment type: Magflow meter OPTIFLUX Primary, Equipment name: OPTIFLUX DN 300 mm primary Head,
Supply and installation of Ac/DC powered ELECTROMAGNETIC FLOWMETER CONVERTER with modbus communication.
Supply and fixing of JUNCTION BOX PCB AND POTTING KIT (FLOW SENSOR) for power operated EMF meters.
Supply and fixing of JUNCTION BOX PCB AND POTTING KIT (FOR CABLE JOINT) for power operated EMF meters.
Supply of RTU - ( Remort Terminal Unit) suitable for M/s.siemens make flow meters which is including HART input MODEM,GSM/GPRS MODEM, WITH 4-20 MA ,iM2M, power operated, suitable for BWSSB existing se...
Installation and commissioning of RTU unit at existing flowmeter and integrate with BWSSB Existing server to take the readings online and 24/7 monitoring obtain the reading with the server.
replacement of liner for the EMF flowmeters for 150 mm dia.
replacement of liner for the EMF flowmeters for 300 mm dia.
replacement of liner for the EMF flowmeters for 450 mm dia.
replacement of liner for the EMF flowmeters for 600 mm dia.
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Dismantle, transport, re-instal and commission the bulk flow meters with the following works: (1). Removing of sensor probes from the existing pipe lines (2). Dismantling of the sensor cables from the...
Providing and Laying of multi-core sensor cable from the sensor probes to the transmitter panel.
Shifting of transmitter panel with all points accessories from one location to other location as per direction of Engineer in charge.
Repair or replacement of existing panel for painting, welding, replacement of rubber gaskets, complete re-wiring, cleaning the panel with dust cleaner and providing panel lock.
Providing, fabricating and fixing at site various diameter MS MJ ends to suit CI / DI pipe as per the sketch .The cost is inclusive of all materials, i.e, rubber 'O' rings, flanges, bolts and nuts, co...
Do-For CI / DI pipes of 300mm dia.
Do-For CI / DI pipes of 150mm dia.
Do-For CI / DI pipes of 450mm dia.
Do-For CI / DI pipes of 600mm dia.
Do-For CI / DI pipes of 900mm dia.
Providing, installation of power operated 900mm dia EMF meters as per site conditions & with hard rubber approved make to the water supply mains, Modbusoutput suitable for transferring flow data to th...
Providing, fabricaing and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire ch...
Do-Flanges of 600mm dia and 25mm thick.
Do-Flanges of 250mm dia and 20mm thick
Do-Flanges of 300mm dia and 20mm thick
Do-Flanges of 150mm dia and 12mm thick
Do-Flanges of 900mm dia and 32mm thick.
Providing and fixing bolts including nuts and washers complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-C...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS-732...
Do-for above 500mm dia pipes.
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3in volume and stock piling at designated locations and disposal of dismantled...
Work of supply, erection and commissioning of indoor upto 250 Amps distribution panel as specified below: Supply, erection and commissioning of Indoor type upto 250 Amps MCCB distribution panel with o...
Supply and fixing of Surge Protection devices (SPD)of type-2 at the power source to the sensitive Electronic and Electrical Equipment.Detail Specification is as follow: - In Conformance with standards...
Providing, filling and laying of sand bags filled with sand / clay for diversion of sewage during execution of work.
2 kVA Online UPS (230 V AC, 1 phase, 50 Hz) UPS with Battery confirming to KPTCL specification.
Wiring, Installation, Testing & Commissioning of UPS with batteries & cables.
Supply of 48 V DC Converter for SDH Equipment DC supply.
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Hydraulic Excavator of 0.9 m3 bucket.
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confor...
Pipe of 914mm dia-10mm thick.
Providing Outer lining to M.S pipes by spinning including cleaning the outer surface, removing rust, millscales etc., with CM 1:3 for minimum 25mm thick over 50x50 weldmesh of 13 gauge lining and conf...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip.
Digging of Pit for providing GI Pipe type Earthing Ordinary Soil.
600 x 600 x 3 mm Copper plate.
Dismantling of kerb stones by mannual means ansd disposal of dismantled materials with all lead and lifts.
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Mobile Hydraulic Crane 10 t capacity.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Spreading of Stone Dust : Supplying and providing stone dust in the station yard or wherever required including watering, ramming, consolidating and dressing. The rate includes the cost of material, l...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Copper control cable 4C x 10 Sq mm.
Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any) 2.5 to 25 Sqmm.
Laying of cable in existing trench/GI Pipe/Stone ware/RCC hume pipe using wooden/aluminum rollers as directed by the deparmental staff 2.5 to 25 Sqmm.
Supplying & Fixing of Power strip.
Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary soil/Soft rock & depth not exceeding 300mm as p...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supply and installation of solar plant suitable for the flowmeter.DC charges, DC to AC converter, Litium battery backup
Engineering Graduate Employee - 2 person x 0.5 year
licening charges for obtaining 1KW 230V power supply for the flowmeters, including deposit charges, meter cost etc.
Dewatering Pump 10 HP
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DTP- South East-2nd call.doc
Tender Document • 1.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .