COMPREHSENSIVE AND PREVENTIVE MAINT OF VARIOUS LAUNDRY PLANTS AND EQUIPMENTS INCL CONNECTED ITEMS AT VARIOUS LOCATIONS UNDER GE UTILITY BATHINDA

Amount

Maintenance and servicing of following mentioned Machines of Mechanical Laundry including connected control Panel and carrying out routine check of the machine oiling, replacement of all the worn out parts such as nuts bolts washers, connectors, thimbles, lugs, greasing, replacement of defective safety devices, relays, control switch gears, alarms complete for smooth functioning complete all as per manufacturer's instructions and as directed. The Maint and Servicing has to be carried out through OEM or reputed dealer of OEM i.e. M/s Lucky Engineering Works.The Details and Specifications of the equipments are as follows :- (a) Horizontal washing machine of 50 Kg capacity having outer and inner stainless steel of AISI 304 quality,electrically heated ,front loading ,auto reverse ,auto timed ,auto temperature controlled ,fitted with control panel and 3 phase electric motor etc complete - 02 Nos (b) Direct drive Hydro Extractor of 25 Kg capacity having outer MS galvanised and inner basket SS of AISI 304 quality self balancing with rubber buffer mounts fitted with brake ,starter and 3 phase electric motor etc complete - 02 Nos (c) Tumble drier of 50 Kg capacity front loading type having outer MS galvanised and inner basket AISI 304 quality ,stainless steel ,electrically heated ,auto reverse auto timed ,fitted with control panel ,blower and 2 electric motors etc complete - 02 Nos (d) Flat bed press of size 30" x 60" with auto timer release and programmable temperature control, dry ironing top including compressor - 01 No (e) Air compressor with air tank pressure of 7 kg/sqcm to provide air to hot head press and flat work ironer complete with electric motor of required capacity.- 01 No (f) Vacuum ironing table of size 1480mm x 770mm x 830 mm with table top size 1250mm x 750mm with net weight 50 kg tubular constructionfitted with 2 nos shelves- 01 No. (g) Flat work ironer(steam heated) of roller length of 1600 mm dia of 600 mm - 01 No (h) Troller for wet and dry with holding capacity 50 kg of size 930mm x 630mm x 800mm with net weight 40 kg fully SS fitted with 4 nos sweveling type - 04 Nos. (j) Sluicing machine 7 Kg capacity electrically heated having two doors ,bucket ,wash motor, extractor motor,water inlet connections complete- 02 No (k) LT Panel box with start / stop push button, contractors, timer for automatic reverse and forward rotation of basket, over load relay, pilot lights, fuse units etc- 01 No

Maintenance and servicing of following mentioned Machines of Mechanical Laundry Plant including connected control Panel and carrying out routine check of the machine oiling, replacement of all the worn out parts greasing, replacement of defective safety devices, relays, control switch gears, alarms complete for smooth functioning all as per manufacturer's instructions and as directed.( three plant installed at different location). The Maint and Servicing has to be carried out through OEM or reputed dealer of OEM i.e. M/s Supershine Laundry Systems Pvt Ltd. The Details and Specifications of the eqpts are as follows :- (a )Front loaded Washing machine with inbuilt hydro extractor of 25 Kg capacity having outer and inner stainless steel of AISI 304 quality,electrically heated ,front loading ,auto reverse ,auto timed ,auto temperature controlled ,fitted with control panel and 3 phase electric motor etc complete- 09 Nos. (b) Front loaded tumble drier of 25 Kg capacity front loading type having outer MS galvanised and inner basket AISI 304 quality ,stainless steel ,electrically heated ,auto reverse auto timed ,fitted with control panel ,blower and 2 electric motors etc complete - 03 Nos. Note for Ser item No. 01.00 and 02.00 of BoQ : (i) Minor Spare parts amounitng to Rs 1000.00 which are not included in these items and are reqd to make mchine fucntional are deemed to be included in quoted rates and rest all spares which are required for replacement during the maintenance period shall be measured and paid separately at supply only rates and cost of labour for fixing these spares shall be deemed to be included in the rate quoted for these items and nothing shall be paid extra on this account . (ii) Cost of all consumables required during the maintenance period shall be deemed to be included in the rate quoted for these items and nothing shall be paid extra on this account. (iii) The tenderer has to call the Service engineer of M/s Lucky Engineering Works for servicing of the Machines every month for serial item No.1.00 of BoQ and M/s Supershine Laundry system Pvt Ltd for serial item No.2.00 of BoQ. The 02 (Two) preventive / periodical maint services and 01 (one) Half Yearly comprehensive maint service of all the machines as mentioned in Note (a) to (k) of serial item No.1.00 of Boq of Make : M/s Lucky Engineering Works in Note (a) to (b) of serial item No.2.00 of Boq of Make : M/s Supershine Laundry System Pvt Ltd has to be done from the OEM and. (iv) All the complaint / faults will be addressed within 30 min from the time of receipt of complaint. If, contractor or his tradesmen fails to attend the complained within 30 min from the time of receipt of complaint, the compensation/penalty of Rs. 500.00 (Rupees Five Hundred only) per complaint per hr for first 04 hrs and after that Rs. 1000.00 (Rupees One Thousand only) per complaint per hr shall be recovered from the contractor’s dues. (v) The cost of transportation (to and fro) and other necessary equipment shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.

Supply Only Steel wool suitable for Flat Work Ironer Machine

Supply Only Flannel cloth suitable for Flat Work Ironer Machine

Supply Only Final cover suitable for Flat Work Ironer Machine

Supply Only Conveyor belts with hook & pin suitable for Flat Work Ironer Machine

Supply Only Guide tape suitable for Flat Work Ironer Machine

Supply Only Main bearing set roller suitable for Flat Work Ironer Machine

Supply Only SS flexible Hose of size 25mm for steam inlet suitable for Flat Work Ironer Machine

Supply Only VFD drive suitable for Flat Work Ironer Machine

Supply Only V-belt set suitable for Flat Work Ironer Machine

Supply Only V-belt of size A-102 of main drive suitable for Drying Tumblers of 25 Kg capacity

Supply Only Main drive bearing of size-2210 alongwith sleeves suitable for Drying Tumblers of 25 Kg capacity

Supply Only Bye Pass Assembly with SS Ball valves of size 25 mm suitable for Drying Tumblers of 25 Kg capacity

Supply Only Idler drive bearing of size-22213 alongwith sleeves suitable for Drying Tumblers of 25 Kg capacity

Supply Only Aluminium blower for suction suitable for Drying Tumblers of 25 Kg capacity

Supply Only Glass with rubber packing fixed with and including SS screws suitable for Drying Tumblers of 25 Kg capacity

Supply Only Rubber Packing for lint screen for Drying Tumble of capacity 25 Kg

Supply Only Door Latches for lint screen suitable for Drying Tumblers of 25 Kg capacity

Supply Only Door limit switch suitable for Drying Tumblers of 25 Kg capacity

Supply Only Main door lock suitable for Drying Tumblers of 25 Kg capacity

Supply Only Timer 0-60 sec time delay suitable for Drying Tumblers of 25 Kg capacity

Supply Only MPD for Drying Tumbler of capacity 25 Kg

Supply Only Timer rev-fwd action suitable for Drying Tumblers of 25 Kg capacity

Supply Only Digital temperature controller suitable for Drying Tumblers of 25 Kg capacity / flat bed press

Supply Only Contactor AC3 type for Drying Tumbler pf capacity 25 Kg

Supply Only Teflon Sheet/Cloth with round end springs for Flat Bed Press

Supply Only Padding set suitable for Flat bed Press

Supply Only Finial cover with rod and spring for Flat Bed Press

Supply Only Main bearing suitable for Flat bed Press

Supply Only Main spring with eye bolt suitable for Flat bed Press

Supply Only Solenoid Valve for main cylinder for Flat bed Press

Supply Only Silencers suitable for Flat bed Press

Supply Only Flow control valve of size 25 mm suitable for Flat bed Press

Supply Only Flexible hose pipe of size 20 mm for air suitable for Flat bed Press

Supply Only Air valve of size 15 mm for manual control suitable for Flat bed Press

Supply Only By pass valve heavy duty of size 25 mm suitable for Flat bed Press

Supply Only FRL unit for Flat Bed Press

Supply Only Timer GIC type suitable for Flat bed Press

Supply Only SS flexible steam inlet pipe of size 20 mm suitable for Flat bed Press

Supply Only White nipples suitable for Flat bed Press

Supply Only Thermo Couple for Flat Bed Press

Supply Only Red / green push button

Supply Only Indicator lamp

Supply Only Transformer of 15 Amp capacity suitable for Hydro Extractor of 25 Kg capacity

Supply Only Buffer suitable for 25 Kg Hydro extractor

Supply Only Oil seal suitable for 25 Kg Hydro extractor

Supply Only Brake Timer 0-60 sec time delay suitable for 25 Kg Hydro extractor

Supply Only Diode 10HI CN 25D suitable for 25 Kg Hydro Extractor

Supply Only Over load relay suitable for Hydro Extractor of 25 Kg, 5 HP Motor capacity

Supply Only Limit switch suitable for 25 Kg Hydro extractor

Supply Only Timer 0-15 sec time delay suitable for 25 Kg Hydro extractor

Supply Only 3 Ph, 415 Volt , contactor, 40 Amps with neccessary NO & NC aux contact suitable for 25 Kg Hydro extractor

Supply Only 3 Ph, 415 Volt , contactor, 25 Amps with neccessary NO & NC aux contact suitable for 25 Kg Hydro extractor

Supply Only Spring suitable for 25 Kg Hydro extractor

Supply Only Main Drive Bearing Block

Supply Only Main Drive Bearing

Supply Only Main Drive Sleeve

Supply Only Counter Bearing Block

Supply Only Counter Bearing

Supply Only Counter Sleeve

Supply Only Drive Belt

Supply Only Counter Belt

Supply Only Drive Motor

Supply Only Blower Motor

Supply Only Microprocessor Card for 50 Kg Machine

Supply Only Temperature Probe

Supply Only Reversing Contactor

Supply Only Blower Contactor

Supply Only Power Supply Card

Supply Only Emergency Swtich

Supply Only Door handle

Supply Only Door Glass

Supply Only Door Rubber Gasket

Supply Only Glass Gasket

Supply Only Blower fan

Supply Only Lint Mesh Filter

Supply Only Main Drive Pulley

Supply Only Main Drive Pulley Bush

Supply Only Counter Pulley

Supply Only Counter Shaft

Supply Only Motor Pulley

Supply Only Door Lint Handle

Supply Only Door Lint Lock

Supply Only Door Lint Key

Supply Only Door Hinges

Supply Only Heating Element 3 KW

Supply Only Heating Glass Wire

Supply Only Microprocessor Board for 25 Kg Washing Machine

Supply Only Output card

Supply Only Power Supply Card

Supply Only Heating Contactor

Supply Only Relay Card

Supply Only MCB Switch

Supply Only Variable Frequency Drive (VFD)

Supply Only Bearing Housing

Supply Only Main Bearing

Supply Only Bearing Sleeve

Supply Only Oil Seal

Supply Only Water Valve

Supply Only Chemical Valve

Supply Only Drain Valve

Supply Only Chemical Hose

Supply Only Drain Hose Pipe

Supply Only Emergency Switch

Supply Only Door Rubber Gasket for Washing Machine 25 Kg

Supply Only Door Glass for Washing Machine 25 Kg

Supply Only Door Glass Gasket for Washing Machine 25 Kg

Supply Only Heating Element for Washing Machine 25 Kg 2 Kw

Supply Only Heating Glass Wire for Washing Machine 25 Kg

Supply Only Main Motor

Supply Only Motor Belts of size B77 to 102

Supply Only Supply only heating coil as per sample. Make-Danfoss

Supply Only Supply only contactor ML-1.5 Make-L&T

Supply Only Supply only contactor ML-2 Make-L&T

Supply Only Supply only electronic timer ST100.Make-L&T

Supply only solenoid valve of size 1/3" to 2/3" as specified and directed by Engr-in-charge.

Supply only ON/OFF push button with thermo plastic body actuators with carrier having flush type push button.Make-AE

Supply only overload relay.Make-L&T

Supply only strip heater in paired (2 KW) of ISI marked 2 no as specified and directed by Engr-in-charge. Make: Danfoss

Supply only breaking transformer of 5KW capacity.

Supply only DC convertor of capacity 110V,2.5Amp.

Supply only Air pressure controller

Supply only air pressure gauge of capacity 0-300 PSI. Make-H Guru.

Supply only DOL starter 5 HP.make-L&T

Supply only gate valve 20mm .

Supply only auto cut switch for hand electric iron as specified and directed by Engr-in-charge.

Supply only Voltmeter Make-AE.

Supply only Ammeter .Make-AE

Supply only Pedestal bearing model NSK-517 .make-FK

Supply only trolly wheel for troller of capacity 50 Kg as per sample directed by Engr-in-charge .

M & L for Servicing and rewiding of motor of .5 /1 HP capacity including replacement of wornout bearing and bushes complete. Make- ABB/ Bharat bijlee.

M & L for Servicing and rewiding of motor of 3 HP capacity including replacement of wornout bearing and bushes complete.Make- ABB/ Bharat bijlee.

M & L for Servicing and rewiding of motor of 5 HP capacity including replacement of wornout bearing and bushes complete.Make- ABB/ Bharat bijlee.

M & L for Servicing and replacement of wornout bearing and bushes of hydraulic pump complete.

Desconnecting and removing unserviceable MCCB 630 amp. Supply and fixing MCCB 3 pole 415 volt of capacity 630 Amp,breaking capacity not less than 35 ka ,thermal setting 80-100%,Ics=100% Icu,confirming to IEC-947,IS-1347,including thimble,nuts,bolts washer etc.

All as per srl item no 136 here in before but capacity 100 Amp breaking capacity not less than 25 KA.

Desconnecting and removing unserviceable MCB 63 amp. Supply and fixing MCB 3 pole 415 volt of capacity 63 Amp,including thimble,nuts,bolts washer etc.

Desconnecting and removing unserviceable MCB 32 amp. Supply and fixing MCB 3 pole 415 volt of capacity 32 Amp,including thimble,nuts,bolts washer etc.

Supply only sensor for auto water filling in drum as specified and directed by Engr-in-charge.

Supply only programmable logic controller kit model-TM218LDA40DRN of ISI marked as specified and directed by Engr-in-charge.

Supply only contactor MNX-25. Make-L&T

Supply only contactor MNX-18. Make-L&T

Desconnecting and removing unserviceable MCB 10 amp. Supply and fixing MCB 3 pole 415 volt of capacity 10 Amp,including thimble,nuts,bolts washer etc.

Desconnecting and removing unserviceable MCB 6 amp. Supply and fixing MCB 3 pole 415 volt of capacity 6 Amp,including thimble,nuts,bolts washer etc.

SS CONSTRUCTION

M/s Kataria Construction Company

NASIB ENGINEERS AND CONSTRUCTION

ADP Engineering

Lucky Engineering Works