Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹8.1 L−₹46,995 (5.33%)Accepted-AOC PLOT NO 1A INDIRA NAGAR AGARAM ROAD SELAIYUR CHENNAI 600073 | CHENNAI | CHENGALPATTU | TAMIL NADU | 600073 | L2 | Accepted-AOC BEING L1 | |
| 2 | L1₹8.8 LRejected-Finance | L1 | Rejected-Finance BEING L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Due to inadequate category | |
| 4 | Rejected-Technical 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | - | Rejected-Technical Due to insufficient documents | |
| 5 | Rejected-Technical | - | Rejected-Technical Due to inadequate category |
Tender Value
₹10.0 L
EMD Value
₹20,000
Closing Date
16 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I RD AVADI
AGE I RD AVADI CHENNAI PIN 600054
REPAIR AND MAINTENANCE OF ROLLING SHUTTER AND CONNECTED ITEMS IN CERTAIN BUILDINGS (OTM/ MD) AT CVRDE AVADI
2024_MES_660531_1
8640/E8
Open Tender
Civil Works
Item Rate
180 days
AVADI
As per Tender Documents
8 documents required · 8 mandatory
₹500
AGE I RD AVADI
₹20,000
Yes
9 Oct 2024
19 Jun 2024
18 Jul 2024
19 Jun 2024
16 Jul 2024
2 Jul 2024
Amount
S&F Steel rolling shutters of 1.25mm thick MS sheet lath, with ball bearing as specified including top cover, anchoring rod, hasp and staple,etc and including one shop coat of primer before erection in position as indicated complete including taking down old rolling shutter all as specified and as directed by Engineer-in-Charge. Note: i) The painting shall be measured and paid separately.
-Ditto- all as per ser item No 01 above but gear operated type with bevel gear box and crank handle complete all as specified.
M&L for Preparation of old steel surfaces over 10cm in width or girth and applying one coat of aluminium paint in any position complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint in any position complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coats of synthetic enamel paint on new steel surfaces over 10cm in width or girth complete all as specified and as directed by Engineer-in-Charge.
M&L for applying two coats of aluminium paint on new steel surfaces over 10cm in width or girth complete all as specified and as directed by Engineer-in-Charge.
Servicing of steel rolling shutters (manual type) for easy operation, rectification of defects removing of dirts, greasing machanism, refixing with clamps revetting where necessary including repairs to locks all as specified and as directed by Engr-in-Charge for the rolling shutters of any following sizes including fixing only spare parts wherever necessary, taking down and refixing in position of shutters of size not less than 7.5 sqm and n.exc 30 sqm complete all as specified and directed by Engineer-in-Charge. Note: Spare parts will be measured and paid separately.
Supply only fabricated lock plate of riveted construction made of Mild Steel Sheet not less than 3.15mm thick reinforced with MS angle section not less than 35X35X5mm Size and lock plate shall be having handle 2Nos, lock plate 2Nos complete all as specified and directed by Engineer-in-Charge.
Supply only top and bottom runners made out of 1.25 mm thick MS sheet complete all as specified and directed by Engineer-in-Charge.
Supply only cast iron worms gear of standard make / size complete all as specified and directed by Engineer-in-Charge.
Supply only folding patties of 18 gause MS sheet complete all as specified and as directed by Engineer-in-Charge.
Supply only end clips complete all as specified and as directed by Engineer-in-Charge.
supply only ball bearing suitable for rolling shutters for 40 / 50 mm dia shaft complete all as specified and as directed by Engineer-in-Charge. Make : SKF/NBC
Supply only "00" gauge spiring of size 100mm dia 600mm long as specified and directed by Engr-in-Charge.
Supply only '2' gauge main spiring of size 100mm dia 600mm long as specified and as directed by Engr-in-Charge.
Supply only 40mm dia main shaft any length complete all as specified and as directed by Engineer-in-Charge.
Supply only 50mm dia main shaft any length complete all as specified and as directed by Engineer-in-Charge.
Supply only gauge wheel suitable size complete all as specified and as directed by Engineer-in-Charge.
Running welding in repairs not exceeded 6mm thick to be welded complete all as specified and as directed by Engineer-in-Charge.
Supply only hood cover made out of 1mm thick MS sheet all as specified and as directed by Engineer-in-Charge.
Supply only guide channel made out of 3.15 mm thick MS sheet including cleats complete all as specified and as directed by Engineer-in-Charge.
Supply only handles of MS size 200mm long complete all as specified and as directed by Engineer-in-Charge. Make : GEM / Standard.
Supply only shaft lever locking arrangement complete all as specified and as directed by Engineer-in-Charge.
Supply only 3.15mm thick bracket plate shape as per IS 6248-1979 of MS fabricated type of size exc 300x300mmx3.15mm and not exc 375x375x3.15mm complete all as specified and as directed by Engineer-in-Charge.
Supply only 3.15mm thick bracket plate shape as per IS 6248-1979 of MS fabricated type of size exc 400x400x6mm and not exc 500x500x6mm complete all as specified and as directed by Engineer-in-Charge.
Supply only Bevel gear box with crank handle all as specified and as directed by Engineer-in-Charge.
K Kumar Construction (BID ID -3050749)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .