Renovation of General Toilet at Ground Floor of Old GO s Mess, Police Line, Sector 26, Chandigarh

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, dept upto 1.5 m, including getting out the excavated soil, and then returningt he soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10

All kinds of soil .2.10.1

Pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia .2.10.1.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : .4.1

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources .4.1.3

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources .4.1.10

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level .5.1

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources) .5.1.3

Centering and shuttering including strutting, propping etc. and removal of form for .5.9

Suspended floors, roofs, landings, balconies and access platform .5.9.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. .5.22

Cold twisted bars LS .5.22.3

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar ocations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. .8.2

Granite stone slab colour black, Cherry/Ruby red .8.2.2

Area of slab over 0.50 sqm .8.2.2.2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300mm x 600mm) .8.31

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete .9.74

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete .9.76

Providing and fixing bright finished brass handles with screws etc.complete: .9.100

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. .9.101

Single rubber stopper .9.101.1

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: .10.14

Profile B .10.14.1

Fixing with adjustable lugs with split end tail to each jamb .10.14.1.1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. .11.41

Size of Tile 600x600 mm .11.41.2

12 mm cement plaster of mix : .13.4

1:4 (1 cement: 4 coarse sand) .13.4.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. .13.80

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete .13.88

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : .13.41

Old work (one or more coats) .13.41.1

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. .15.2

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) .15.2.1

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : .15.12

Of area 3 sq. metres and below .15.12.1

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. .16.68

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. .16.83

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost). .16.84

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3

W.C. pan with ISI marked white solid plastic seat and lid .17.3.1

Providing and fixing wash basin with C.I. bracket 15 mm C.P. brass pillar taps 32 mm C.P. Brass waste of standard pattern inculing painting of fittings and brakets cutting and making good the walls wherever require .17.7

White vitreous china ware wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps .17.7.3

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: .17.10

Kitchen sink without drain board .17.10.2

610x460 mm bowl depth 200 mm .17.10.2.2

Providing and fixing white vitreous china water closet squatting pan (Indian type) : .17.13

Orissa pattern W.C. pan of size 580x440 mm .17.13.2

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. .17.16A

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28

Flexible pipe .17.28.2

32 mm dia .17.28.2.1

Providing and fixing soil, waste and vent pipes : .17.35

100 mm dia .17.35.1

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 .17.35.1.2

75 mm diameter : .17.35.2

Centrifugally cast (spun) iron socketed pipe as per IS: 3989 .17.35.2.2

Providing and fixing heel rest sanitary bend .17.40

100 mm dia .17.40.1

Sand cast iron S&S as per IS - 3989 .17.40.1.2

Providing and fixing collar : .17.57

Sand cast iron S&S as per IS - 3989 .17.57.1.2

Sand cast iron S&S as per IS - 3989 .17.57.2.2

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : .17.58

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : .17.60

100 mm inlet and 75 mm outlet .17.60.2

Sand cast iron S&S as per IS - 3989 .17.60.2.2

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : .18.11

15 mm dia nominal bore .18.11.1

20 mm dia nominal bore .18.11.2

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. .18.12

20 mm dia nominal bore .18.12.2

Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end) : .18.17

20 mm nominal bore .18.17.1A

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : .18.18

20 mm nominal bore .18.18.2

Providing and fixing uplasticised PVC connection pipe with brass unions : .18.21

30 cm length .18.21.1

20 mm nominal bore .18.21.1.2

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : .18.46

15 mm diameter bore .18.46.1

20 mm diameter bore .18.46.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : .18.49

15 mm nominal bore .18.49.1

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. .18.52

15 mm nominal bore .18.52.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53

15 mm nominal bore .18.53.1

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. .18.53A

Cutting holes up to 30x30 cm in walls including making good the same: .18.76

With common burnt clay F.P.S. (non modular) bricks .18.76.1

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: .19.4

100x100 mm size P type .19.4.1

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.4.1.1

Providing and fixing 22"x16" (550x400) mm beveled edge mirror complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete .NSR

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. .NSR

15 mm nominal bore .

Construction of curb with CC 1:2:4 along with upto 1.00 depth for made it proof water including cost of sand, bajri complete in all respect. .NSR

Dismataling the floor tiles and wall tiles complete in all repect .NSR

Providing and fixing of SFRC inspection chamber cover 600x600x35 mm thick made out of M.S. angle iron size 35x35x5 mm and TMT bars 10 mm i/d both sides incluing cutting welding and fixing with cement concrete 1:1 1/2 :3 complete .NSR

Provinding and fixing of SFRC G.T. cover 375x375x25 mm thick made out of M.S. angle iron size 25x25x5 mm thick with fixing wire mash 1"x1" of 10 guage incluing cutting welding and fixing with cement concrete 1:1 1/2 :3 complete .NSR

Providing and fixing of tank nipple complete in all respect. .NSR

Providing and fixing Soap Dispenser glass button capacity 0.8 L material ABS finish of Make Jaquar complete in all respect NSR. .NSR

Providing and fixing white vitreous china flat back half stall urinal 375 x 390 x 590 mm standard size with fitting standard size C.P brass flush pipe spreaders and clamps (all in C.P brass ) with waste fitting as per IS :2556, C.L. trap with outlet grating and other coupling in C.P brass including painting of fittings and cutting and making good the walls and floors wherever required (CERA Make CAPRIANA Cat. No. S4020112* OR Equivalent) .NSR

Providing and fixing PVC Pipe 4" (100mm Nominal bore) i.e. 6 Kg/ sq pressure complete in all respect .NSR

Providing and fixing PVC Pipe 3" (100mm Nominal bore) i.e. 6 Kg/ sq pressure complete in all respect .NSR

Providing and fixing in postion of towal rail in with rawel plugs embedded in wall with C.P brass screws .NSR

Providing and fixing of C.P towel ring with brass screw make viking or equivalent .NSR

Providing and fixing of C.P steel long bend Complete in all respect .NSR

Providing and fixing in position best indian make soap dish fixed into wall with C.P brass screws and complete in all respect including curring and making good the wall etc. .NSR

Providing and fixing ISI marked water proof 30 mm thick flush door shutters of pine frame seasoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungas resistant, eco friendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848; complete in all resepct. .NSR

Dismantaling of GI/CI Pipes and taking out the pipes, manually by macanical means including stacking of pipes with in 50 meters lead as per direction of Engineer-in-charge .NSR

Providing and fixing Urinal Partitions Specifications Rectangular shaped urinal partition with frosted glass Glass: 8mm / 10mm Finish: Chrome make Jaquar model JSE-CHR-810UC450X or equvilant model of same range complete in all respect. .NSR

Please Enable Macros to View BoQ information