Renovation of IEI to 09 Nos. Type-I Qtrs Qtr.No.01 to 09 for Fire Services at Sisty Nagar under Marine Section for Police Department under Section-IV of EandM Sub-Division, Workshop Division, APWD, Port Blair

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

a) Group A

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

a) 5/6 A switch

b) 3 pin 5/6 A socket outlet

c) Telephone socket outlet

d) TV antenna socket outlet

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying of LED 20W Batten with extruded aluminium housing and highened non-yellowish diffuser Make:- Bajaj-BCLAB 20W WH LED P Inlcuding 20W LED T8 tube with PC body Make:- Bajaj-BLRB 20CW LED or equivalent in Crompton/Havells/Philips complete with all accessories etc as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of AC ceiling fan 1200mm sweep Make :- Havells ES PLUS 2 Star ISI mark or equivalent in Bajaj/Crompton/Ortem/Khaitan/Usha complete with all accessories etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of Exhaust fan 250mm sweep Plastic Ventillation Fans Make:- Bajaj MAXIMA DXI 250mm White DOM EX fan or equivalent in Havells/Orient/Crompton/Usha complete with all accessories etc as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

a) Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying of 10W LED Bulkhead fitting Make:- Havells RUGBY GENX 10 Code No. RUGBYGENXFTS10WLED865SSYMBOPCor equivalent in Philips/Bajaj/Crompton/ complete with all accessories etc as required.

Supplying of 9 W LED decorative wall light fixture made up of polycarbonate suitable for 9W LED lamp B22 base Make:- Havells GLOBE code No. LHFOFUE1TZ1W012 and LED Plus 9W B22 WW 2 star lamp Make:- Havells Cat.No.LHLDDDENIC5R009 or equivalent in Bajaj/Crompton/Philips complete with all accessories etc as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 6 way , Double door

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 1 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Supplying, installation, testing and commissioning of ASHLOK make SEE brand safe earthing electrode type-19, 50mm dia, length 2 mtrs (short time current -52.6 rms for 1 sec, peak-125.6) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying, installation testing and commissioning of indoor type floor mounted distribution-cum-meter board of size 1.5 mtr x 1 mtr compact type 440 volts 3 phase, 50 Hz made with M.S rectangular pipe, M.S angle, M.S flat, plywood, Hylem sheet to accommodate PVC sintex distribution box of size 350mm x 250mm x 150mm in built with copper strip busbar for RYB & N and 03 Nos. cut out 63A/415 volt inter connection with 10 Sq.mm FRLS PVC insulated copper condcutor single core cable etc, PVC sintex meter box, cut out, indicator including supplying and fixing of the above items including interconnection with suitable copper cable. The board should have earthing, 1 coat of Red oxide Zinc chromate primer and 2 coat of finishing aluminium paint and P.C.C work etc as required. (For 6 Nos. energy meter).

Supplying, installation testing and commissioning of indoor type floor mounted distribution-cum-meter board of size 1.5 mtr x 1 mtr compact type 440 volts 3 phase, 50 Hz made with M.S rectangular pipe, M.S angle, M.S flat, plywood, Hylem sheet to accommodate PVC sintex distribution box of size 350mm x 250mm x 150mm in built with copper strip busbar for RYB & N and 03 Nos. cut out 63A/415 volt inter connection with 10 Sq.mm FRLS PVC insulated copper condcutor single core cable etc, PVC sintex meter box, cut out, indicator including supplying and fixing of the above items including interconnection with suitable copper cable. The board should have earthing, 1 coat of Red oxide Zinc chromate primer and 2 coat of finishing aluminium paint and P.C.C work etc as required. (For 3 Nos. energy meter).

S SAMATHANAM

POWER ENGINEERING CO

JAY ENGINEERING

RAVI RAJ ELECTRICALS

DAYAL HALDER