CERTAIN MAJOR REVENUE WORKS AT VARIOUS LOCATIONS AT CHAF BANGALORE

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc., complete all as speicified and as directed by Engr-in-charge.

Taking down chowkhats or frames exc 1.5 sqm but not exc 4 sqm with shutter (without taking of shutter from the frames) including taking out hold fasts and PCC bed block complete all as speicified and as directed by Engr-in-charge.

Demolition brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as speicified and as directed by Engr-in-charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards /slabs/ blankets, any thickness including cover fillets etc., complete all as speicified and as directed by Engr-in-charge.

Material and labour for 8 to 9 mm thick pre painted gypsum building boards of size 595x595mm PVC laminated at back side of board insulation and acoustic purpose flat in ceiling fixed or laid/ including powder coated GI snap grid of size 605x605mm frame work using 36.50x23.50x1.5mm main Tee, 23.50x23.50x1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4mm dia G.I (upto 1.5m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as speicified and as directed by Engr-in-charge. Note: The rate inclusive of scaffolding and necessary arrangements.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door, openings, etc., or cutting out, defective brick work for under-pinning, including, providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc., to store and rubbish not exc 50m complete all as speicified and as directed by Engr-in-charge.

Supply and fix for pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as speicified and as directed by Engr-in-charge.

Material and labour for PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as filled in pressed steel foor frames etc., complete all as speicified and as directed by Engr-in-charge.

Supply and fix for 35mm thick factory made second class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commecrcial ply or 12mm veneered particle board with commecrcial veneering on both face. The size of rail and stile as per IS 1003 (Part I), kiln seasoned and chemically pressure treated complete all as speicified and as directed by Engr-in-charge.

Supply and fix for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as speicified and as directed by Engr-in-charge.