Provisioning of Modular Wardrobe for FC Type Quarters at SOE HAL Bangalore

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Year of Estblishment of Company/Business

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

PAN no and Name of Holder

PF number (If any)

ESI number

Goods and Service Tax ID No.

Contact details

Registered Contractor

Pls Enter

I.T Returns for past 03 assessment years

Turnover during the following 5 years (In Rs. Lakhs)

Pls enter Finiancial Turnover in Rupees Lakhs for all the years

DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : CA certified statement as per below format to be uploaded.

Name of Organization with address

Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Bank(s) details: [Copy of ECS and cancelled cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Bank Statement for past three month

Latest Overdraft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

Solvency Certificate Details

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate]

Related Document to be Uploaded to eProcurement Portal

DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Name of members or technical personllel avalable in the organization

DETAILS OF MACHINERY AVAILABLE

Name of Mechinery

Concrete Mixers - Type etc

Vibrators - Diesel - Electrical

Weiding equipment's

a) Rectifiers

b) Welding Generators

Erection equipment's

Cranes-

Hoists-

Lifts-

Water Lifting motor pumps

a) Diesel

b) electric

Drilling Equipment's

Compressors

Trucks

Stone crushers

Bitumen hot mixture plant

Bitume boiler

Rollers

Batching plants

Vibratory rollers

Generators

Cranes-Details

Concrete pumps

Road Pavers

Rock breakers

Transit mixers

Excavators

Weight batches

Others

DECLARATION

Pls enter

EMD details

Enclosed / Not enclosed

Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2025 and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account (In Rs. Lakhs)

Specification

Demolition of existing brick masonry built in cement mortar manually / by mechanically means including stacking serviceable materials within 50 m lead etc., all complete as directed by Engineer-in-Charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead etc., all complete as directed by Engineer-in-Charge.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts etc., all complete as directed by Engineer-in-Charge.

Providing plastering 15 mm thick cement plaster of mix 1:6 (1 cement: 6 fine sand), finished even and smooth etc., complete all as directed by Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth etc., all complete as directed by Engineer-in-Charge.

Distempering with 1st quality acrylic distemper (ready mixed) for old work one or more coats having VOC content less than 50gr/ltr of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour etc., all complete as directed by Engineer-in-Charge.

Providing and fixing of Modular wooden Loft unit of 600mm depth using 18mm thick BWR/Termite proof plywood board ( 8mm thick for rear surface fixed on wall) with both sides laminated (machine pressed) with colour sheets as approved by EIC and shall be of approved manufacturer.The rate quoted shall also include providing and fixing of SS handles 100mm- 1 for each door, box hinges-2nos on each door, necessary screws and all accessories etc., all complete as directed by Engineer-in-Charge. Note: The contractor shall submit a sample design and drawing of loft unit which will be approved by EIC before start of work.

Providing and fixing of Modular wooden Wardrobe of 600mm depth using 18mm thick water, fire & termite proof plywood board with both sides laminated (machine pressed) with colour sheets as approved by EIC and shall be of approved manufacturer.The unit shall consist of vertical and horizontal members consisting of open shelves, hangar rods, drawers with locking system etc.The rate quoted shall also include providing and fixing of SS handles 150mm- 1nos for each door, hanger rods-2nos,Box hinges-4 for each door, locks for doors and drawers with keys,necessary screws and all accessories etc., all complete as directed by Engineer-in-Charge. Note: The contractor shall submit a sample design and drawing of wardrobe which will be approved by EIC before start of work.

Providing and laying Glazed Vitrified tiles Matt/Antiskid Size of Tile 600 x 600 mm finish of size Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily etc., all complete as directed by Engineer-in-Charge.

Supplying and fixing brass batten/ angle holder including connection etc. as required as per CPWD specification.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing Junction box/ wooden block including connections etc. as required as per CPWD specification.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

3 Module (100mmX75mm)

8 Module (125mmX125mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS//HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

3 x 1.5 sq. mm

3 x 4 sq. mm

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm PVC Conduit Pipe

Removing of the existing follwing approximate wires with conduits, Switches and Sockets in old FC Type Qtrs /old FD Type Qtrs and handing over the same to Engineer-in-charge includng transportation upto FMD/ SOQ stores. Please note the qty is approximate only, However agency has to carryout the removal of items and carryout the works as per instructions of EIC.