Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹4.7 L+₹34,279 (7.95%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹6.0 L+₹1.6 L (38.1%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-FDR not submitted |
| Sl No | Description | Qty | Unit | M/s Aryan Builders L3 | Monarch Engineering Works L2 | AARADHYA CONSTRUCTION L1 |
|---|---|---|---|---|---|---|
| 1.01 | PART A: - Repairing of Grit Separator No.1. Completely isolation and cleaning of grit chambers by closing of sluice gates, providing of gunny bags etc. to make the site workable with water pressure by submersible pump set and taking all safety precautions as per NHRC guidelines. | 1 | Job | 10,000 ₹11,800 Lowest | 10,000 ₹11,800 Lowest | 11,000 ₹12,980 |
| 1.02 | Dismantling of existing M.S structure along with gear box, motor, chain sprocket, chain after cutting of all rusted nut bolts by gas cutter and other required tools & tackles as per site requirement. | 1 | Job | 20,000 ₹23,600 | 12,000 ₹14,160 | 11,000 ₹12,980 Lowest |
| 1.03 | Removing the main shaft from the M.S Structure for dismentaling of "C" channel with the help of gas cutter and manual labour etc. | 1 | Job | 10,000 ₹11,800 | 7,000 ₹8,260 Lowest | 8,000 ₹9,440 |
| 1.04 | Repairing of moving MS structure by repairing/replacing of old worn out C channel (4 mtr approx,140 X 60 X 10 mm), MS Arms (02 Nos. in grit separator) made of angle (65 X 65 X 5 mm) and angle (50X50X3 mm), MS scrappers (8 Nos.) made of MS sheet (300 mm X 1000 mm X 8 mm) i/c synthetic rubber squeezers with the help of gas cutter, welding machine, other tools & tackles as per site requirement. | 1 | Job | 1,20,000 ₹1,41,600 | 98,000 ₹1,15,640 Lowest | 98,000 ₹1,15,640 Lowest |
| 1.05 | Providing & fixing of adjusting studs (150 mm X 20 mm) and nuts with hinged pin for adjustment and balancing of both arm to make the complete balancing of system. | 6 | Nos. | 30,000 ₹35,400 | 48,000 ₹56,640 | 12,000 ₹14,160 Lowest |
| 1.06 | Supply & fixing of sprocket of 1" pitch as per sample. | 2 | Nos. | 14,000 ₹16,520 | 8,000 ₹9,440 Lowest | 8,000 ₹9,440 Lowest |
| 1.07 | Supply & fixing of chain of 1" pitch as per sample. | 1 | No. | 8,000 ₹9,440 | 5,000 ₹5,900 | 4,000 ₹4,720 Lowest |
| 1.08 | Supply of nut bolts of various sizes with washer. | 20 | Kg. | 2,000 ₹2,360 | 1,600 ₹1,888 Lowest | 1,700 ₹2,006 |
| 1.09 | Repairing of gear box by completely dismantling and removing of all inner parts. Repairing of worm gear by machining and replacement of oil seal, gasket and bearing lock. | 1 | NO. | 10,000 ₹11,800 Lowest | 14,000 ₹16,520 | 13,000 ₹15,340 |
| 1.10 | Re-fixing of Complete system i/c gear box, motor, chain sprocket, chain with proper alignment and balancing by nut bolts and gas cutter and other required tools & tackles as per site. | 1 | Job | 10,000 ₹11,800 Lowest | 25,000 ₹29,500 | 18,000 ₹21,240 |
Tender Value
Refer Docs
EMD Value
₹8,750
Closing Date
18 Sept 2025, 3:00 pmClosed
OFFICE OF THE EXECUTIVE ENGINEER (SDW)-III
STP YAMUNAVIHAR, WAZIRABAD ROAD DELHI-110053
Repairing/Strengthening of M.S Structure of Grit Chamber No.01 at STP Ph-I Yamuna Vihar.
2025_DJB_278067_2
NIT No. 03 (25-26)
Open Tender
Miscellaneous Works
Works
60 days
Yamuna Vihar.
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Ac No. 50448339804
₹8,750
23 Sept 2025
11 Sept 2025
18 Sept 2025
11 Sept 2025
18 Sept 2025
11 Sept 2025
PART A: - Repairing of Grit Separator No.1. Completely isolation and cleaning of grit chambers by closing of sluice gates, providing of gunny bags etc. to make the site workable with water pressure by submersible pump set and taking all safety precautions as per NHRC guidelines.
Dismantling of existing M.S structure along with gear box, motor, chain sprocket, chain after cutting of all rusted nut bolts by gas cutter and other required tools & tackles as per site requirement.
Removing the main shaft from the M.S Structure for dismentaling of "C" channel with the help of gas cutter and manual labour etc.
Repairing of moving MS structure by repairing/replacing of old worn out C channel (4 mtr approx,140 X 60 X 10 mm), MS Arms (02 Nos. in grit separator) made of angle (65 X 65 X 5 mm) and angle (50X50X3 mm), MS scrappers (8 Nos.) made of MS sheet (300 mm X 1000 mm X 8 mm) i/c synthetic rubber squeezers with the help of gas cutter, welding machine, other tools & tackles as per site requirement.
Providing & fixing of adjusting studs (150 mm X 20 mm) and nuts with hinged pin for adjustment and balancing of both arm to make the complete balancing of system.
Supply & fixing of sprocket of 1" pitch as per sample.
Supply & fixing of chain of 1" pitch as per sample.
Supply of nut bolts of various sizes with washer.
Repairing of gear box by completely dismantling and removing of all inner parts. Repairing of worm gear by machining and replacement of oil seal, gasket and bearing lock.
Re-fixing of Complete system i/c gear box, motor, chain sprocket, chain with proper alignment and balancing by nut bolts and gas cutter and other required tools & tackles as per site.
Fabrication & Fixing of canopy on the motor and gear box for safety.
Repairing of moderation system of water flow by cutting / removing of old rusted MS pipe/plates and p/f of MS "U" clamp and handles as per site requirement.
Painting atleast 2 coats or more with Primer.
Testing and commissioning of complete grit chamber on no load & on full load.
PART B: - Repairing of Rack Classifier No.1. Dismantling the M.S structure of rack classifier alongwith gear box, motor, bearing bracket, all connecting rod etc. by cutting of all rusted nut bolts with the help of manual labour and other required tools & tackles as per site requirement.
Replacement of MS bottom scrapper of size 75x325x6 mm as per site requirement. The job i/c dismantling of old damaged scrapper by the help of gas cutter from the classifier.
Supply & fixing of neoprene rubber as squeezers.
Repairing of existing connecting rod by machining work. Making bore as per bush size for fixing of GM bush as per job requirement.
Providing & Fixing of GM bush including casting, machining and finishing as per sample.
Supply & fixing of bearing with bracket as per sample.
Supply & fixing of gearbox as per sample. Make: Premium/Greaves/ DJB approved
Repairing of center mechanical drive system by dismantling of gear, shaft, bush, lock, plat and repairing/rementaling & machining of shaft, making/fixing of new bush and other required work as per required by job.
Providing & Fixing of 2 Nos. new roller making by machining work including new shaft making accurate bore as per bearing dia and providing/fixing of new bearing of existing size the job includes providing and fixing of new liner plate of both side for movement of roller for smooth working of classifier.
Fabrication & Fixing of canopy on the motor and gear box for safety.
Supply of nut bolts as per site requirement.
Assembling of complete Rack classifier at site with all dismantled items at original position making proper alignment and balancing and fixing with hardware goods with the help of Chain block and manual labour with handling equipment.
Painting atleast 2 coats or more i/c primer of classifier.
Testing and commissioning of complete grit chamber on no load & on full load.
Monarch Engineering Works (BID ID -1620834)
M/s Aryan Builders (BID ID -1620148)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .