REPAIR / MAINT OF EXTERNAL WATER SUPPLY INSTALLATION, PLANT / MACHINE INCLUDING PIPE LINES, ALLIED WATER SUPPLY WORK AT VSB AND SWIMMING POOL AT 7 BRD AF UNDER GE (AF) TUGHLAKABAD

Amount

Taking up U/S CI water main (incl all fitting) with spigot & socket /MS pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe upto 150mm bore for laying /rerouting of serviceable pipe after cleaning complete all as directed.

All as per Item No 01 Above but 200 mm dia, complete all as specified and directed.

S&F in replacement of DI pipes of size 100mm bore with spigot and socket end centrifugally cast class "K- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position, complete all as specified and directed. (make- kejriwal casting/ kesoram/electro steel). Note: DI fitting /lead joint / Tyton joint will be measured and paid seperately all the dismanted / demolished /taking down material shall be reused or removed from site.

All as per Item No 02 Above but 150 mm dia, complete all as specified and directed.

All as per Item No 02 Above but 200 mm dia, complete all as specified and directed.

S&F in replacement of DI/CI bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of the following size upto 150 mm dia complete all as specified. Note: Lead /gasket for fitting shall be measured and paid separately.

M&L in replacement of ruber gas ket joint/ tyton joint for CI/DI pipe of size100 mm bore, complete all as specified and directed.

M&L in replacement of ruber gas ket joint/ tyton joint for CI/DI pipe upto size 150 mm bore, complete all as specified and directed.

Taking down carefully cast iron sluice valve of size 150 mm bore from CI water mains, dismantling parts and reassembling, replacement of ss spindle for sluice valve, class PN 1.0, and repacking stuffing box of sluice valve spindle, refacing, regrinding and refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed.

All as above item No: 6, but for 100mm dia sluice valve, complete all as specified and directed.

All as above item No:6, but for 80mm dia sluice valve, complete all as specified and directed.

M&L in replacement of pressure gauge to read in IS/BS unit type KG/cm2 and LB/inc2 reading marked 0-2, 0-30 respectively including taking old one complete all as specified and as directed.

Taking out existing U/S CI sluice valve of any size any pattern up to 150 mm bore from 80 mm bore complete all as directed.

S&F of Cast iron sluice valve of size 80 mm dia Stainless steel stem PN- 1.6 ( Flanged) conforming to IS 14846 hand wheel operated, complete all as specified and directed. Make - Zoloto /Kirloskar/Kartar

All as per Item No 11 Above but 100 mm dia, complete all as specified and directed.

All as per Item No 11 Above but 150 mm dia, complete all as specified and directed.

Supply and laying in replacement of galvanised steel water tubing medium grade in trenches / wall /floor with all fittings , connections as required at site of size 15 mm bore, complete all as specified and directed. Make : Tata/Jindal

All as per Item No 12 Above but Bore of pipe 20 mm, complete all as specified and directed.

All as per Item No 12 Above but Bore of pipe 25 mm, complete all as specified and directed.

All as per Item No 12 Above but Bore of pipe 50mm, complete all as specified and directed.

All as per Item No 12 Above but Bore of pipe 80mm, complete all as specified and directed.

All as per Item No 12 Above but Bore of pipe 100mm, complete all as specified and directed.

S&F in replacement of Stop valve gun metal valve with iron handle screwed both ends for iron pipe and fixed of size 15 mm bore, complete all as specified and directed. Make- Zoloto, Saint, Kartar

All as per Item No 13 Above but Bore of pipe 20mm, complete all as specified and directed.

All as per Item No 13 Above but Bore of pipe 25mm, complete all as specified and directed.

All as per Item No 13 Above but Bore of pipe 50mm, complete all as specified and directed.

S&F in replacement of GI socket of 15 mm ISI marked complete all as specified and directed by Engr-in-charge. Make- Unik/Tata/Jindal

All as per Item No 14 Above but Bore of pipe 20mm, complete all as specified and directed.

All as per Item No 14 Above but Bore of pipe 25mm, complete all as specified and directed.

All as per Item No 14 Above but Bore of pipe 50mm, complete all as specified and directed.

S&F in replacement of GI union of 15 mm ISI marked complete all as specified and directed by Engr-in-charge. Make- Unik/Tata/Jindal

All as per Item No 15 Above but Bore of pipe 20mm, complete all as specified and directed.

All as per Item No 15 Above but Bore of pipe 25mm, complete all as specified and directed.

All as per Item No 15 Above but Bore of pipe 40 mm, complete all as specified and directed.

All as per Item No 15 Above but Bore of pipe 50 mm, complete all as specified and directed.

S&F in replacement of GI nipple of 15 mm, 6 " long ISI marked complete all as specified and directed by Engr-in-charge. Make- Unik/Tata/Jindal

All as per Item No 16 Above but Bore of pipe 20mm, complete all as specified and directed.

All as per Item No 16 Above but Bore of pipe 25mm, complete all as specified and directed.

All as per Item No 16 Above but Bore of pipe 40 mm, complete all as specified and directed.

All as per Item No 16 Above but Bore of pipe 50 mm, complete all as specified and directed.

S&F in replacement of GI elbow of 15 mm medium grade ISI marked complete all as specified and directed by Engr-in-charge. Make- Unik/Tata/Jindal

All as per Item No 17 Above but Bore of pipe 20mm, complete all as specified and directed.

All as per Item No 17 Above but Bore of pipe 25mm, complete all as specified and directed.

All as per Item No 17 Above but Bore of pipe 40 mm, complete all as specified and directed.

All as per Item No 17 Above but Bore of pipe 50 mm, complete all as specified and directed.

S&F in replacement of pig lead joint metal type for CI/ MS pipe lineall as specified and directed by Engr-in-charge.

S&F in replacement of Spun yarn for CI/ MS pipe line all as specified and directed by Engr-in-charge.

Dismounting of monoblock 02 HP pump and motor from foundation including disconnecting all electric connection suction / delivery line connection and transporation to pumping set civil work shop and return to store after repair including Re- assembing of motor and testing and commissioning all as specified and directed.

Taking out the pump from the motor and rewinding of 02 HP motor with super enamelled copper wire same gauge & size includinng all insulating material ie. sleeves stick and insulation sheet. and replacement of the following parts. (a) Replacement of driving and non driving end ball bearing-02 Nos. (b) Balanceing of rotor including straightening of strip -02 Job. (c) Replacement of bearing bush upper and lower-02 Nos.

S&F in replacement Pressure booster pump 0.5HP, 230 Volt, 50 Hz of 25mm dia inlet & oulet pipe dia complete all as specified and directed by Engr-in-Charge. Make:- Cromption mini force II and equivalent

Taking out existing U/S NRV of size 50-150 mm bore complete all as directed.

Suply and fixing in replacement of cast iron NRV flanged end of size 150 mm dia with all fitting and accessories, complete all as specified and directed. Make- zoloto /Kirloskar/Kartar

All as per item 24 above but 100 mm dia, complete all as specified and directed.

All as per item 24 above but 80 mm dia, complete all as specified and directed.

All as per item 24 above but 50 mm dia, complete all as specified and directed.

Taking out existing U/S valve chamber incl brick work & PCC work complete all as directed.

M&L in replacement for construction of valve chambers with MS cover 3 mm thick of valve pit of size 900x900x900 MM( internal dimensions) including necessary excavation, earth work 150 mm thick PCC (1:4:8) Type D2 as in foundation, PCC 1:2:4 Type B1 in coping plastering 15 mm thick in cm (1:4), and angle iron frame 50x50x06 mm and locking arrangement including painting with coat of synthetic enameled paint over a coat of redoxide primer after preparation of surface complete all as specified and directed by Engineer-in-charge.

Removing of u\s leakage tank from roof /Surface and disconnecting all fitting and fixture. Up to 1000 ltr from 5000 ltr. All as directed by Engineer-in-charge.

Supply and fixing in replacement of rotational moulded polyethy lene water storage tank (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part I. of size 1000 Ltrs. Make- Sintex

All as per item No 31 but 2000 ltr, complete all as specified and directed.

All as per item No 31 but 5000 ltr, complete all as specified and directed.

Removing of the existing u/s float valve from the tank of any capacity, complete all as specified and directed.

Supply and fixing in replacement ofPVC float valve, high pressure (ball cock bady with epoxy coated aluminium rod & HD ball) of size 20 mm dia.including all fittings, complete all as specified and directed. Make- prayag or equivalent make

All as per item No 35 but 25 mm dia, complete all as specified and directed.

All as per item No 35 but 50 mm dia, complete all as specified and directed.

Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed by Engr-in- charge.

Retuning filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed by Engr-in- charge.

Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting pointall as specified.

Removing of the battery any capacity from DG set and disconnecting the battery lead from the battery terminal, complete all as specified and directed.

Supply and fixing in replacement of Battery 12 volt 180 AH maintenance free.compllete all as specified and directed by Engr-in-charge. Make- Exide/Amron

Boring of holes under road, pavement, Hard standing by trenchless trenchless technology using ultra sounding technique and necessary machine including pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed by Engr-in-charge.

M& L for minor reparing / rectified and attending the complaint of pipe line leakage and reparing of any size by highly skilled trades man and making functional including all GI fittings like elbow, socket, Tee, Nipple, bend, union etc and making new threads as required at site including excavation,return refilling and removing soil & earth work etc. complete all as specified and directed.

S&F in replacement Submersible cable PVC insulated copper conductor flat 3 core 4 sqmm 1100 volt, complete all as specified and directed. Make-Havells, Finolex, Plaza

S&F in replacement Submersible cable PVC insulated copper conductor flat 3 core 6 sqmm 1100 volt, complete all as specified and directed. Make-Havells, Finolex, Plaza

S&F copper lugs size varying from 6 sq mm to 35 sqmm for jointing cable, all as specified and directed by Engr-in-Charge. Make- Dowells Cat Part No CUS-554

Supply only Chlorine Testing kit with coloured ample complete with all testing fitments and OT solution in Rexene finish box complete all as specified & directed.

M&L for cutting of existing CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessory exvation and earthwork, dewatering etc,if any involed, complete all as specified and directed for 80mm bore of pipes Note for item no: 49, 50 & 51: S&F of insertion of fittings/pipes pieces etc shall be measured & paid separately.

All as per item No: 49 above but of 100m bore pipe, complete all as specified and directed.

All as per item No:49 above but of 150m bore pipe, complete all as specified and directed.

M&L for Removal of the existing paint from the pumping set of any size and suction pipe line and discharge pipe line of any by the hand scrapping and painting gray colour for the pumping set and black colour for the suction line and discharge line including pump base with two coat of synthetic enamel paint by spray painting of Asian make . and rewriting the SM NO. All as specified and directed by Engr-in- charge.

S&F in replacement Nut, bolt, washer of different size ISI marked, complete all as specified and directed.

S&F in replacement lather gasket ISI marked, complete all as specified and directed.

Supply in repair of grease for pump servicing and filling of gland dori in pump ISI marked, complete all as specified and directed.

Testing of Raw Water/Treated water for bacteriological analysis, Chemical analysis & dissolved salts i.e. manganese, arsenic, nitrates, Fluoride etc, parameters confirming as per IS:10500-2012 from any Govt. Approved/recognized Lab as approved by the GE. Note:- 1) Contractor has to collect samples from various pump houses & borewells in Vayusenabad on alternately basis from different sources as directed by Engr-in-charge. 2) Contractor will be responsible to carry out the sample & submit report timely.

Taking out floor nozzle from the pool M&L for fixing including testing of single hole/eye ball floor inlet nozzle as per sample existing at site of 40/50 mm bore as per site requirement all as specified and directed by Engr-in-Charge.

M&L in replacement for MCCB 3 pole 100 amps, thermal adjustable magnetic type, 25 KA complete all as specified & directed. Make- Legrand/Havells/L&T

M&L in replacement for MCCB 4 pole 100 amps, thermal adjustable magnetic type, 25 KA complete all as specified & directed. Make- Legrand/Havells/L&T

M&L in replacement for MCCB 3 pole 200 amps, thermal adjustable magnetic type, 35 KA complete all as specified & directed. Make- Legrand/Havells/L&T

M&L in replacement for MCCB 4 pole 250 amps, thermal adjustable magnetic type, 50 KA complete all as specified & directed. Make- Legrand/Havells/L&T

M&L in replacement of ampere meter digital type, 415V suitable for existing panel CT operated of range 0-100 as required complete all as specified & directed.. Make- AE/L&T/Legrand

M&L in replacement of ampere meter digital type, 230V suitable for existing panel CT operated of range 0-100, complete all as specified and directed. Make- AE/L&T/Legrand

M&L in replacement of voltmeter digital type, 415V suitable for existing panel CT operated of range 0-500, complete all as specified and directed. Make- AE/L&T/Legrand

M&L in replacement of LED indicator lamp, complete all as specified and directed. Make- SG/L&T/Selzer

M&L in replacement of panel mounted ON/OFF push button with contact block, complete all as specified and directed

M&L in replacement of CT 50/5 complete all as directed. make-AE/kappa/Legrand

M&L in replacement of Single phase preventor VSP 2 auto/manual reset of any size , 415V complete all as specified & directed. make-AE/L&T/SG/Minilec.

Supply & fix in replacement of Electronic overload relay (Manual reset) relay range 45-75amp suitable for direct mounting, complete all as specified and directed. Make- L&T or equivalent ISI marked.

M&L in replacement of Electronic overload relay (Manual reset) relay range 9-16 amp suitable for direct mounting, complete all as specified and directed. Make- L&T Cat part No SS9597900A0 or equivalent ISI marked.

Supply & fix in replacement of rex surface mounting switch suitable for motor starter, 415 Volt, 50 Hz range 3-10 Secs complete all as specified & directed. Make-Legrand cat part no 6499 15 or equivalent ISI marked.

Supply only Calcium based granule Chlorine (calcium hypochlorite) having chlorine content upto 68% disinfect for water treatment complete all as specified & directed by Engineer-in-charge.

S&F in replacement single phase motor starter of capacity 02 HP current rating 20 Amp overload relay range 13.2-20 Amp, complete all as specified and directed. Make- Havells/L&T or equivalent ISI marked.

M& L for replacement of complete rusted body of of electric driven, Monoblock pump set with motor, Single Phase, 230V, 3.1 LPS at 24 Mtr head system having capacity 2 HP, suction/delivery size 50x 40mm dia with all connected accessories all as specified and directed. Make:- Crompton cat No: MBK22 (1Ph)/ Havells/Kirloskar/ Crompton

Supply and fixing in replacement of suction sweeper trolly wheel with rings complete as per sample complete all as specified and directed by Engr-in-Charge

Supply and fixing in replacement of deep bag net made from Polypropylene and white Polyster netting with 1.5" butterfly nut/clip connection and suitable to trap deep pool larger sedimennts, complete all as specified and directed. Make-DS Water Tech/Chemflow india Pvt ltd/ AV Engineering

M&L for cleaning of complete Swimming pool by dewatering of water and cleaning to be done from the bottom and side walls scrubbing with brush for removing fungus and washing with hydrochloric acid mixing with water after removing all the sediments collected at the bottom of the pool and balancing tank all as specified and directed by Engr-in-charge

All as per item No 77 but cleaning of Balancing tank, complete all as specified and directed.

Supplying, injecting and mixing of alum crysal of approved quality with ISI mark in swimming pool through dozing system installed complete all as specified and directed by Engr-in-Charge.

Supplying, injecting and mixing of soda ash of approved quality with ISI mark in swimming pool through dozing system installed complete all as specified and directed by Engr-in-Charge.

Supplying, injecting and mixing of TCC-90 of approved quality with ISI mark in swimming pool through dozing system installed complete all as specified and directed by Engr-in-Charge.

Supplying, injecting and mixing of pool water, hydrochloric acid has proven to be profoundly effective at removing algae from the floors and walls of a pool while also lowering pH levels & dozing system installed complete all as specified and directed by Engr-in-Charge.

Supplying, injecting and mixing of Copper Sulphate of approved quality with ISI mark in swimming pool through dozing system installed complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of FPBC nylon flexible hose pipe premium grade 40 mm outer dia size heavy duty capacity suitable for suction sweeper complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of nylon rope, 25 mm outer dia size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair of rubber coupling suitable for 20/40 HP pump set as per existing pattern complete all as specified and directed by Engr-in-Charge.

S&F in repair of MS/GI Flange of size 50 to 150 mm and fixing of new one MS/GI Flange at same location where MS/GI Flange is taken out including nuts bolts etc all as specified and directed.

Supply and fixing in repair of pre-fabricated MS structural steel (IS marked) work consisting of channels / angles /flats/ round bars/MS pipe & other sections etc of various sizes and shape, cut / weld / drilled holes etc hot / cold in position for cross arms with FI clamps (full, half D and earth clamp etc) incl necessary MS bolts, nuts etc and painting for hanging strcture for repair bay all as directed by Engr in Charge.

M&L in Repair of Rusted CI Tail Piece of size 80mm to 200 mm at same location where CI Tail Piece is taken out all as specified and directed.

S&F in replacement of PPR gate valve (brass insert) of size 63 mm dia including connection and testing complete all as specified and directed including taking out old unserviceable gun metal gate valve 50mm dia Complete all as specified and directed

Supply & laying/fixing in replacement of 3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee etc. as required at site and testing of joints complete all as specified and as directed of size (a) PN-16, 63mm OD (SDR– 7.4) including taking out old rusted GI pipe of 50mm dia.

M&L in replacement for installation of Digital water level indicator device,with 19mm size digit display including probe unit ,five stage magnetic sensor concealed in SS tube of required length,controlling box including systems incorporated with stage signal,high & low alarm, pump automation as directed capable to one tank from one pump complete all as specified and directed by Engr in Charge. Make : SECO/SATYA SAI Technical Specification Prinipal of operations : Negative sequence voltage sensing Systems Voltage & frequency :- 415 +/-20% , 50HZ +/- 5% Contact rating 1 Amp at 415 V AC Trip time delay 3 to 5 seconds Temparature Range : -5 degree C to 50degree C Suitable for - Upto 18 to 25 mtrs OH/UG sump Humidity : Up to 95 % R.H H.V test : 2 KV AC (RMS) 1 min between live parts & body Mode of Operation : Auto/manual

Supply and fixing of replacement of CI pipe 150 mm bore flanged ends class LA- ISI marked including necessary nuts bolts and packing etc complete all as specified and directed.

All as per item No: 93 above, but for 200m bore pipe, complete all as specified and directed.

M & L for preparation of old Cast iron/ GI steel water tubing including all fittings and Sluice valves and applying two coats of synthetic Enamel paint (Colour as decided by Engineer -in- Charge) on suction,delivery of pump Sets, pipe lines of dia not more than 200mm complete all as specified and directed by Engineer-in-charge.

M&L for fixing in replacement of Cast Iron butterfly valve (wafer Type) of following size without lugs, lever operated, SS 304 Disc, Nitrile /EPDM rubber lining test pressure PN-1.0 for the following size, complete all as specified and as directed by Engr-in-Charge. Make Zoloto/Leader/kirloskar/L&T

All as per item No:96 above, but of 50 mm dia, complete all as specified and directed.

All as per item No:96 above but of 100 mm dia, complete all as specified and directed.

All as per item No:96 above but of 150 mm dia, complete all as specified and directed.

Taking down old unserviceable and Supply and fixing following swimming pool item, complete all as specified and directed.

Standard wall Brush 18" of SS material

18” Brush- Alu Back of SS material

Leaf Skimmer

Deep Leaf Rake

Telescopic Pole 8 Meters of Aluminium material

Deluxe large Vac head,4 wheels,SS body,SS hande (3 ft.)

M&L for replacing uncharged and non cogulant sand media and marble stone aggregate of suitable grade and size for pressure filter (650LPM) of size 1000mm dia made of FRP floor mounted in alternate layers- 4 Nos complete all as specified and directed.

Labour/service charged for removing old charged & cogulated sand media layer by layer including filter membranes and making new layers of sand, marble stone aggregate and filter membrane both vertical in center of vessel and between each layers sand and stone of suitable thickness and compressing it properly and the testing, commissiong filters as specified and directed by EIC. Note: (1) Rate of filter membrane of any size, type, grading and quantity as per existing is deemed to be included in quoted rate. (2) Rate are deemed to be inclusive of lifting arrangement of vessel like hydra, T&P and labour required at site. (3) Repair of minor defect encounter during overhauling of sand filter media filter is deemed to be included in quoted rate. (4) Acid and other cleaning agent required for cleaning of inner surface of vessel is deemed to included in quoted rate. (5) Rate are deemed to be inclusive of uPVC fittings (any type, size and quantity) required at site for disconnecting and refixing vessels after overhauling. (6) Rate are deemed to inclusive of repair to vessel if any damage caused to vessel and fitting due to mishandling by labour during execution of work.

S&F in replacement of multiport valve suitable, 650LPM, 900mm dia vessel having 63mm PVC pipe with 6 way water flow, vertically side mounted on vessel with 360 degree rotating handle (made of high strength plastic), including valve to be properly consealed, tighten and leakage proof, complete all as specified and directed.

All as above item No: 100, but 63mm PVC pipe with 6 way flow, top mounted on vessel, complete all as specified and directed.

S&F in replacement of PVC pipe of 63mm dia suitable for 10kg/cm2 pressure bearing capacity including all fittings like socket, elbow, tee etc., complete all as specified & directed.

S&F in repalcement of PVC union of 63mm dia along with necessary reducers as required on site, complete all as specified & directed.

S&F in replacement of underwater LED light of 20 watt with IP66 protection, 35000K temp, 100mm dia dial size, SS body, complete all as specified & directed.

S&F in replacement of SS body housing suitable for underwater LED light of 3mm thic round in shape, four nos holes for cable, complete all as specified & directed.

S&F in replacement of SMPS suitable for underwater LED light of 20 watt, complete all as specified & directed.

M&L for taking out and lowering down submersible pumpset of capacity 5-10HP along with GI column pipe of 50mm bore (60 meters) from borewell complete all as specified and directed.

Supply and fixing in replacement of rubber gasket sheet suitable for 50mm bore GI column pipe complete all as specified and directed.

Supply and fixing in replacement of medium grade GI column pipe of 50mm bore complete all as specified and directed

S&F in replacement of MS flange 12mm thick of internal bore of 50mm and outer dia of 100mm complete all as specified and directed.

M&L for welding of MS flange on column pipe including making bore for nut bolts and groove cutting in flange for submersible cable run through grooves complete all as specified and directed.

Supply and fixing in replacement of nuts, bolts and washers complete all as specified and directed.

M&L for Development of bore well for improving the yield of bore well and to achieve sand free crystal clear water by means of air compressor not less than 630 CFM capacity by lowering 32 mm dia pipe up to the depth of not less than 260 feet . Development should be continuing by applying air jerk at required intervals. It also includes pouring of chemical to dissolve the compact rust, sand and other sediments. After development and achieving required result pipe and connected items shall be taken out from the bore well and removed sand shall be removed from the pump house building in all respect.

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.

Material & Labour for concealed point wiring with single core PVC insulated and unsheathed 1100 volts grade cable with multistranded copper conductor of size 1.5 Sqmm nominal area drawn through & including non metallic rigid PVC conduit (circular/flat pvc conduit), medium duty not less than 20 mm dia concealed in wall/fixed on wall/ceiling with GI saddles , GI screws , rawl plugs with all fittings including tees , junction boxes including fixing GI gang box of any module not less than 3.15mm thickness flushed in wall with hylem cover sheet of suitable size for mounting switches , sockets & regulators & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with copper conductor solid conductor of size 1.5 sqmm complete all as specified & directed by Engineer -In-Charge. Note: Cost for cutting chases in any type of wall/ceiling and supply & flushing conduit pipe, junction box, tee, PVC flexible pipe and GI gang box ( any qty, Nos & module) and making good to match the existing surface shall be deemed to be included in the quoted rate.

For one light point controlled by one single pole switch & socket.

For one fan point controlled by one single pole switch.

For one 3 pin sockets outlet 5 Amps on the same board with other switches with cable of size 1.5 sqmm

For 3 pin socket outlet 5Amps independent with cable 1.5 Sqmm size

For one 3 pin sockets outlet 15 Amps idependent with cables 2.5sqmm size

Supply and Fixing in replacement of modular switches 1 way, 6 Amp 1 module complete all as specified & directed by Engineer - In-Charge.

Supply and Fixing in replacement of modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified & directed by EIC.

Supply and Fixing in replacement of modular switches 1 way, 16 Amp 1 module complete all as specified & directed by Engineer - In-Charge.

Supply and Fixing in replacement of modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified & directed by EIC.

S&F in replacement of stepped type electronic fan regulator flush type 1 module, complete all as specified & directed by EIC.

Supply & Fixing in replacement of Ceiling Rose, 3 phase polycarbonate isolated body including hylem/plastic round shape junction box cover & brass screw nuts, complete all as specified & directed by Engineer - In-Charge.

Supply and fix in replacement of factory made epoxy polyster powder coated distribution board SP&N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings complete all as specified and confirming to IS: 8623 (Make: Legrand /Siemens). Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.

S&F in replacement of Wiring for circuit/submain wiring alongwith earth wire in PVC conduit pipe with wire of 2x4.0 sq. mm + 1x2.5 sq. mm earth wire of FR is PVC insulated copper conductor, single core cable in surface/recessed as required, complete all as specified & directed.

S&F in replacement of RCCB 32Amps of 30mA cat. single pole 'C' curve, complete all as specified & directed.

S&F in replacement of RCCB 100Amps of 30mA cat. double pole 'C' curve, complete all as specified & directed.

S&F in replacement of Pressure cutoff switch suitable for 0.5HP inline pressure pump, complete all as specified & directed Make: Danfoss or any equivalent make

ANAND ENTERPRISES

M/S Delhi Engineering Co.

M/s Prakash Enterprises

Rohan Construction Company

Bluemax Associate

GARG TRADERS