Improvements of road NH-50 to Valasang, Beeri(K), Nagral, Kudli, Nittur(B), Balur, Halhipparga cross MDR road from km 26.00 to 29.00 in Bhalki Tq Bidar Dist. BDR25222313

Clearing and Grubbing Road Land. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earli...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction.

PWD Vol-1 for 202...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Plant Mix Method :- Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers wi...

Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...

Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported t...

Providing and laying Dense Graded Bituminous Macadam with

40/60 TPH capacity HMP using crushed aggregates of specified

grading, premixed with bituminous binder VG-30, @ 4.5 per cent

by weight of total...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

KKRDB NAME BOARD

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lig...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

providing and fixing Centering shuttering and formwork

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications

PWD Vol-1 for 2023-24 I No.2.11.h P N...

Road furnitures

Direction and Place Identification Signs upto 0.9 m2 Size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity grade sheet...

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

Kilometre Stone

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc

5th kilometre stone (precast)" ...

Reinforced cement concrete M-15 Grade kilometer stone of Standard design as per IRC:8-1980, fixing in position including painting and printing etc

(ii) Ordinary kilometer stone (precast) "

Reinforced cement concrete M-15 Grade kilometer stone of Standard design as per IRC:8-1980, fixing in position including painting and printing etc

(iii) 200 m stone (precast) "

Road Humps / speed breakers

Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IR...

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr LongSteel/RCC/PSCC supports as per approved Drawing.

RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. For KPTCL & ESCOMs/GM/QS&S/02 Dtd 24.11.2018) as per IS-785"

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

PSCC Pole - 9 Mtr Long, 200 Kg WL

(Dwg No. For KPTCL & ESCOMs /GM/QS&S/50 Dtd 24.11.2018)

as per REC Standards"

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

11 kV, Special 3 Pin Cross Arm - MS

(Dwg No. For KPTCL & ESCOMs/GM/QS&S/03 Dtd 24.11.2018)"

11 kV, Cross Arm with HT Top Support

(glass reinforced hot pressed SMC compound)"

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)

DISC Insulator 45 kN Porcelain

Digging of Pit for GUY SET

Releasing of Rabbit Conductor

ACSR Conductor as per IS-398 (Part - 2/1996)Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

Stringing of Rabbit Conductor (including pin binding, providing

jumps, dead ending, etc.,)"

PG Clamp Rabbit to Rabbit

T - Clamp for Rabbit conductor with hot dipped galvanized bolts, nuts and washers

LT 4 Pin Cross Arm - MS (Dwg No. For KPTCL & ESCOMs/ GM/QS&S/32 Dtd 24.11.2018)

LT 2 Pin Cross Arm - MS (Dwg No. For KPTCL & ESCOMs/GM/QS&S/32 Dtd 24.11.2018)

Labour charges fixing of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MSa) For RCC Pole

Labour charges Fixing of LT 2 Pin Cross Arm with clamps, bolts, nuts & washers with braces - MSa) For RCC Pole

1.1 kV Ceramic Pin Insulator (Shell only)

No. 8 Strain Insulator

Spiral Earth Electrode

Guarding for Road crossing, Telephone Line Crossing, between HT & LT Line Crossing

a) 200 Amps, Single Break "

Labour for 11 kV, GOS

a) 200 Amps, Single Break"

A) Base Concreting with CC 1:4: 8a) Pole base for 11/9.5/9/8 Mtr supports (500x650x150mm)

b Pole base for 9 Mtr Square Pole (650x650x150mm)

B) Pole Concreting with CC 1:2:4 (without coping) 9 Mtr support (650x500x1700mm)

Guy concreting with Boulders, Mud & SandAs per Drawing No. For KPTCL & ESCOMs/GM/CP/7/dt: 24.10.07.(with out cement)

Transporation by Head Load where ever there is no

accessability for transporation by vechicle for Poles 25 to 105 Mtr "

For ACSR Conductors 25 to 105 Mtr

Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at workspot)

NOTE:- Consolidated amount for both loading and unloading. 9 Mtr RCC/PSCC Pole "

Fixing of HT/LT Single Top Support

DISC Insulator 45 kN Porcelain

GOS as per IS-9921, IS-1977

174 11 kV, 200 Amps Single Break GOS (Dwg No. For KPTCL & ESCOMs/GM/QS&S/23 Dtd 24.11.2018)"

27 Loading & Unloading of Transformer (when maintaince

men for loading and unloading are not available in store)

27 Loading & Unloading of Transformer (when maintaince

men for loading and unloading are not available in store)

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...