Special repair to 01x toilet Block (GF) right side in Bldg No P-1227of HQ Corps, at BB Cantt, Srinagar

Amount

Demolition of cement concrete (unreinforced) in ground floors and in pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 100 mm thick plain cement concrete 1:2:4 type B-2 ( using 40 mm graded stone aggregate) as in sub base of floors all as specified and as directed.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured , over and including 15mm thick screed bed in CM 1:4 ,complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick rendering in Cement mortar 1:3, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar

M&L Machine cut kota stone slab flooring 20-22mm thick over 15mm thick screed in CM(1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sq.m each,complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 square metre but not exceeding 4 square metre each,complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening as per specification and drawing complete all as specified directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitabele PVC sheet beading and joined together with solvent cement suppling and fixing in the frame at site as per specification and drawing, complete all as specified and directed.

S&F 1st class soft wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

S&F 30 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (b) complete all as specified and as directed .

S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm complete, all as specified and as directed

S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified

S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified

S&F 100 mm aluminum alloy handles, fabricated type, anodised complete all as specifed and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm incl wooden bedding, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection, including cleaning for re-fixing or removal to store complete all as specified and directed.

Description all as per srl item No. 20.00 here-in-before but 20 mm bore dia of pipe

S&F steel water tubing 15 mm dia 'medium grade', galvanised, with all fitting and fixed complete to walls and ceillings or laid in floors, complete all as specified and directed.

Description all as per srl item No. 22.00 here-in-before but 20 mm bore dia of pipe

S&F in repair Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

S&F in repairs bib tap cast copper alloy chromium plated fancy type long body with capstan haed handle screwed down high pressure screwed for iron pipe or for brass ferrule of bore 15mm complete all as specified and directed.

S&F CP centre hole single lever basin mixer fancy type for WHB with double action for hot/Cold water complete all as specified and as directed.

S&F in repairs Vitreous china wash hand basin flat back 550x400mm white excluding taps, waste chain and plug but including brackets complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe of polythylene of low or high density or pvc 32 mm dia, complete all as specified and directed.

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed

Taking up 100 mm bore cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead , complete all as specified and directed.

Taking up 80 mm bore cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead , complete all as specified and directed.

S&F PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints fixed to walls, floors etc complete all as specified and directed.

S&F PVC (SWR) 75 mm dia pipes single socketed in any length with rubber ring joints fixed to walls, floors etc complete all as specified and directed.

S&F in repairs PVC (SWR) 75 mm floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 ,including dismantling of existing steel frame, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius , fixed as in repair complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer, complete all as specified and directed.

S&F PVC (SWR) Bends 110 mm bore with access door etc , complete all as specified and directed.

S&F PVC (SWR) Bends 75 mm bore with access door etc , complete all as specified and directed.

S&F PVC (SWR) junction single T of 110 mm bore equal or unequa fixed on wall, complete all as specified and directed.

S&F PVC (SWR) junction single T of 75 mm bore equal or unequa fixed on wall, provided with access door complete all as specified and directed.

S&F PVC (SWR) junction double T of 110 mm bore equal or unequa fixed on wall, provided with access door complete all as specified and directed.

S&F PVC (SWR) reducers 110mm X 75mm, complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm bore including with solvent joint complete all as specified and directed.

S&F PVC (SWR) vent cowl of 75 mm bore including with solvent joint complete all as specified and directed.

Taking down cement plaster of any discription on brick or stone walls or ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc comlete all as specified and directed.

M&L for Rendering 15 mm thick CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement ,comlete all as specified and directed.

M&L for Rendering 10 mm thick in ceiling plaster in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement ,comlete all as specified and directed.

M&L for preparation of newly plastered cieling surfaces and aplying two coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and aplying two coats of Distempering walls with distemper dry, white or tinted over one of primer, complete all as specified and directed.

Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc),including dismantling of existing water tanks, complete all as specified and as directed by Engr-in-Charge.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight of 20mm-210gms), complete all specified and directed.

Cleaning and removing all scale and dirt, etc, from water tanks and from mouths of circulating pipes, etc. exc. 500 litres and not exc.1000 litres capacity etc complete all specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain (or out going pipe) and to flushing pipe , etc complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe), complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L for broken stone or boulders hardcore of guage not exceeding 63 mm, deposited spread and levelled in layers not exceeding 15 cm thick ,watered and rammed to a true surface, complete all as specified and as directed.

M&L for Plain Cement Concrete 100 mm thick, 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, complete all as specified and as directed. Note: The contractor shall submit mix design for concrete of required strength (flexural) from the NABL approved Lab/ CTL/ SEMT/ Govt. Engr College and cost of testing shall be deemed incl in quoted rates.

M & L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ , complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in any type of soil, complete all as specified and directed

M&L for plain cement concrete in foundations, filling and mass concrete type D2, 1:4:8, (using 40mm graded stone aggregate), complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan built in CM 1:4, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastred surface of wall and applying two coats of Cement base paint over a coat of alkale resistant priming paint, complete all as specified and directed.

M & L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in bed plates, coping and like incl plastering on all exposed surface of concerete , incl necessary form work, complete all as specified and directed.

M & L for 60 mm thick vibratory compacted rubbur moulded glossy coloured precast concrete interlocking paver blocks with grey cement and pigment of any shape and size conforming to IS 15658-2006 of M-35 Grade, laid over and including 50mm thick sand cushioning under floors or in foundations including watering and consolidation, complete all as specified and directed. Note: Coloured and shape of block shall be approved by GE.

M&L for digital vitrified heavy duty coloured paving/parking/path tiles of size 300x300 or 400x400 and 10 mm thick, set, jointed and pointed in neat cement sluury, including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for two coats of floor paint (using suitable floor paint like Indigo floor paint) over a coat of primer suitable for concrete floor of approved colour or tint, complete all as per manufacturers instructions and directed by Engineer-in-Charge

M&L for Providing and laying at or near ground level factory made (pre-cast) kerb stone, of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Removing excavated materials exceeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

M&L for returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and as directed

M&L for Framed work such as in angle iron frames for manhole, covers and similar work confirming to Fe 290 grade E-165, complete all as specified and as directed.

M&L for rolled mild steel in chequred plates ,channels /square cut or notched (ordinary and counter sunk) forming holes with riveted /welded attachment confirming to Fe-410 -W grade E-250 Quality A, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets , light fittings etc. removing material for taking credit and making good distrubed surfaces to walls, floors etc complete all as specified and directed.

M&L for point wiring with single core PVC insulated 1100V grade cable with multistranded copper conductor of size2.5 Sq. mm (Nominal area) drawn in and including non metallic rigid PVC concealed conduit, medium grade ISI marked not less than 20 mm dia, concealed in wall, ceiling with saddles, screw & Plugs with all fittings including tee, junction boxes and drawing continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 2.5 sqmm and terminated in and including sunken box for modular switches/sockets, regulators etc complete all as specified and directed.

For one light/fan point controlled by one, one way Switch.

For one 3 pin socket outlet 5/6 Amps on indepented board.

M&L for point wiring with single core PVC insulated 1100V grade cable with multistranded copper conductor of size2.5 Sq. mm (Nominal area) drawn in and including non metallic rigid PVC concealed conduit, medium grade ISI marked not less than 20 mm dia, concealed in wall, ceiling with saddles, screw & Plugs with all fittings including tee, junction boxes and drawing continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 2.5 sqmm and terminated in and including sunken box for modular switches/sockets, regulators etc complete all as specified and directed.

S&F switch piano flush type single pole, one way 5 Amps.

S&F socket outlet 2 in 1, 3 pin 5 Amps.

S&F Sheet metal enclosure with socket plug top and MCBs Double pole 20 Amps and neutral enclousre with a two pin and earth plug and socket complete all as directed.

M&L for ceiling rose 3 phase/PVC/ Polycarbonate, isolated body.

S & F LED light fitting fixture 20W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified. Make-Wipro/Philips/GE

S & F LED light fitting fixture (2 feet), 10W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified. Make-Wipro/Philips/GE

Supply and fix Storage water heater of capacity 25 ltrs, BEE five star rating with all accessories such as saftey valve,NRV etc including making all connections complete all as specified and as directed. Make : Havells Puro Plus/Vinus Lyra/ Crompton Versa

Material and labour for sub main wiring with two single core 6.0 sqmm FRLS, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLS , ISI marked, PVC multistranded copper conductor cable of size 6 sqmm green colour as earth lead including PVC conduit/ casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6 sqmm and one run of PVC casing capping shall be measured as one RM).

S&F of VTPN distribution board iron clad, double door with IP-43 IK-09 protection suitable for 415 Volts 3 phase 50 C/s 4 way, MCCB as incommer and MCB as outgoing with appropriate size of copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 125 Amps rating with rupturing cap 25 kA with thermal magnetic release and 12 Nos of MCB SP 63 Amps 'C' curve type of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed. Make :Cat Part No.VYV04DM-P of Hager or equivalent make of Legrand / Schenider

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified. (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed including taking down.

Supply and fix Isolator DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply and fix isolator SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed iIncluding taking down old one.

Supply and fix exhaust fan made out of sturdy Engineering plastic complete with louvers shutter single Phase, AC 230V, 50 Hz of size 300mm sweep, copper winding complete with, blades, and frame including making connection to ceiling rose all as required or directed.

Supply and fixing LED street light fitting 60 Watt with lense, toughned glass, IP 66 protection 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with impact and corrosion resistant complete with bracket made out of 40mm bore GI tubing 1.5 m with MS clamps, fixing of fitting complete all as specified and directed.

Supply, fixing, installation of sturdy LED Bollard with excellent light output through its PMMA window ensuring maximum illumination aspect in surrounding having length of 1 Mtr in height as per Havells Cat Part No CONENXGBLS8WLED857 PSYMTOPCM (1M) HSN CODE 9405 or equivalent in complete all as specified and directed by Engr-in-Charge.

M & L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in bed plates, coping and like incl plastering on all exposed surface of concerete , incl necessary form work, complete all as specified and directed.

Dry coarse sand as cushioning to under ground cable provided with layer of 8 cms deep before laying the cable and 15 cms deep after laying and stretching the cable, punned to 18 cm thick complete all as specified and as directed. Note:- Only punned thickness shall be measured for payment purpose.

Brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat of size 230mmx115mmx75mm complete all as specified and as directed by Engr-in-Charge.

XLPE insulated sheathed armored heavy duty LT 1100 Volts grade cable with stranded aluminum conductors, laid in trenches/pipe, fixed to poles, walls of size 16 sqmm 4 core, complete all as specified and as directed by Engr-in-Charge.

GI tubing light grade 40mm bore along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles fixed in repair complete all as specified and as directed by Engr-in-Charge.

Material and labour for sub main wiring with two single core 1.5 sqmm FRLS, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLS , ISI marked, PVC multistranded copper conductor cable of size 1.5 sqmm green colour as earth lead including PVC conduit/ casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 1.5 sqmm cable , one run of earth wire of 1.5 sqmm and one run of PVC casing capping shall be measured as one RM).

M & L for street light panel 3 KW conform to IS/ IES 60947-4-1 suitable for three phase MCB rating 63 Amps on/off timer Astronomical, conractor rating 32 Amp including internal wiring in built short circuit protection,IP-54 complete all as specified and directed by Engr-in-Charge. Make: Philips/ Crompton/ Bajaj/ Havells/ C&S

M/S Tajamul Ah Buchh

M/S SUHEEL CONSTRUCTIONS

M/s Lal Enterprises