Development of Mall Road in Thangal Bazar Area Thangal Lambi Phase II under Imphal Smart City Mission

Amount

SH- I ) Pavement Renovation Work

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :a) Water bound macadam road

b)Bituminous road

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Disposal of building rubbish/ malba/ similar unser viceable, dismantled or waste materials by Mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead upto 11km radius, for all leads i/c all lifts involved.

Supply and filling in plinth with fine sand under floors, including watering, ramming

Dry flat brick flooring with 2nd class ( Local mixed class ) bricks & filling joint with fine sand.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(a)1:2:4 (1 cem :2 KanhaighatCoarse sand:4 graded stone aggrt.20mm n/size).

Finishing walls with Acrylic Smooth exterior paint of required shade:- new work (two or more coat applied @ 1.67 ltr/10sqm over and i/c base coat of water proofing cement paint applied @2.20 kg/10sqm.

Steel work welded in built up section/ framed work i/c cutting, hoisting, fixing in position and applying a priming coat of appd steel primer using steel etc as required (a) Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint (i) In gratings, framed guard bars, ladders, railings, brackets and similar works.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50 mm thick compacted bed of moorum, filling the joints with moorum etc. all complete as per the direction of the Engineer-in-charge.

Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using primer as permanufacturers specifications (b)Painting steel work with Deluxe Multi Surface paint to give an even shade.Two or more coat applied @ 0.90 ltr/10sqm over an under coat of primer applied @ 0.80 ltr/10sqm of approved brand or manufacture.

Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using primer as permanufacturers specifications (a) Painting wood work with Deluxe Multi Surface paint of required shade.Two or more coat applied @ 0.90 ltr/10sqm over an under coat of primer applied @ 0.75 ltr/10sqm of approved brand or manufacture.

Finishing walls with Acrylic Smooth exterior paint of required shade (a) Old work (two or more coat applied @ 1.67 ltr/10sqm) on existing cement paint surface

Providing and Fixing U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia

Centering and shuttering including strutting, propping etc. and removal of form for(b) Edges of slabs and breaks in floors and walls Under 20 cm wide

SH- II ) Drainage & Foot Path Upgradation Work

Dismantling tiles work in floors and roofs laid in mortar including stacking material within 50 metres lead.for thickness of tiles above 10mm and upto 25mm

Demolishing RCC work manually/ by mechanical means i/c stacking of steel bars and disposal of unserviceable materials within 50m lead as per direction of Engineer in charge .

Extra for cutting reinforcement bars manually/ by mechanical means in RCC or RB work (payment shall be made on the cross sectional area of RCC or RB work) as per direction of Engineer in charge

Disposal of building rubbish/ malba/ similar unser viceable, dismantled or waste materials by Mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead upto 11km radius, for all leads i/c all lifts involved.

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a)1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(b) Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc. and removal of form for(a) Foundations, footings, bases of columns, etc. for mass concrete

(b) Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing hoisting and fixing upto floor five level precast reinforced cement concrete in shelves i/c setting in cement mortar 1:3, cost of required centering, shuttering but e/c the cost of reinforcement with 1:1.5:3.

Providing 500mm dia Ductile Iron Manhole Cover & frame i/c GST & carriage charge

Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50 mm thick compacted bed of moorum, filling the joints with moorum etc. all complete as per the direction of the Engineer-in-charge.

Finishing walls with Acrylic Smooth exterior paint of required shade:- new work (two or more coat applied @ 1.67 ltr/10sqm over and i/c base coat of water proofing cement paint applied @2.20 kg/10sqm.

Desilting of side drains i/c disposal of the waste complete.

SH- III ) Tree Guard Upgradation Work

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(a)1:2:4 (1 cem :2 KanhaighatCoarse sand:4 graded stone aggrt.20mm n/size).

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a)1:1.5:3 (1 cement : 1.5 Kanhaighat coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.(b) Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc. and removal of form for(a) Foundations, footings, bases of columns, etc. for mass concrete

Supplying and filling in plinth with sandy soil under floors i/c watering, ramming consolidating and dressing complete

Granite 12.5mm thick in risers of steps , skirting , dado walls and pillars laid on 10 mm thick base of cement mortar 1 : 3 ( 1 Cement: 3 Kanhaighat coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete (a) Black/Green

SH- IV ) Cast Iron Benches)

Supplying and fixing Cast iron banches of 130 kg ( Cast iron weight and 11nos. of horizontal HDPE bars of 75 mm x 25 mm anular 98 n environment friendly ) i/c transportation, erection and commisioning at site as per design and drawing and as per direction of the Engineer in charge.

SH- V ) Stainless Steel dustbin with frame

Supplying and fixing 80 Litres capacity cylindrical type perforated 1.0 mm thick stainless steel dustbin (tiltable) of SS304 grade with frames & stands complete etc as per the direction of Engineer in charge.

SH- VI ) Signage

SIGNAGE :- Supplying & Installation of PYLON SIGNAGE ( 13 x 3 Sq Ft. ) complete.

SH- VII )Providing Yard Hydrant Systems

Supply of 150MM MS pipe(M) including all fittings (NEZONE/TATA)

Supply of Wrapping & Coating for 150MM MS pipe.

Supply of 80MM MS pipe(M) including all fittings (NEZONE/TATA)

Supply of Wrapping & Coating for 80MM MS pipe.

Supply of 80 MM Butter Fly Valve. including all fittings. (KARTAR)

Supply of 150 MM Four Way Fire Brigade Inlet including all fittings. (KARTAR)

Supply of 150 MM butterfly valve including all fittings. (KARTAR)

Supply of 63 MM dia Hydrant Valve including all fittings. (KARTAR / KD FIRE)

Installation charge.

SH- VIII ) Electrical Job

S/F Bollard with 9/2.5w square shape integral decorative LED bollard with polycarbonate diffuser and IP65 protection i/c connection etc as reqd.

SITC 35 W LED 370 PSYMTOTG Victoria for outdoor use post lantern on cast iron pole weight 360 kg standard colour (single arm) with 4 nos. of hot dip gulvanised anchor bolt i/c painting etc as reqd.(Bajaj-Alexander/AL equipment Pvt. Ltd.)(Phillps/Havells for LED)

Cable laying and trenching

P/L 4mm2 2 core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

P/L 35mm2 3.5 core pvc ins.(heavy duty) Al. cond. armoured cable of 1.IKV grade in size above 25mm2 but not exceeding 120mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

Supply of 10 sqmm 7/1.35 SWG dia PVC insulated S/Core stranded copper cond. Cable 1100V(ATC)

Supply and erection of MS Pillar Box 5" high 2"6' width 2' depth made by 4mm leaf type door in both sides 2 nos. tower bolts to be fixed both sides 1 no. 63 amp. TPN switch fuse unit sheet steel enclosure switch fuse unit Havells 2 nos. 32 amp. TPN MCCBs sheet steel enclosure 1 no. 4 pole 80 amp. connector and 100 amp. TPN cu. tinned cu. busbar size of cu. bar 25mmX6mmX460mm with brass bar chamber on interconnection by suitable size cu. wire painting of pillar box second coat of Al. paint over first coat red oxide primer etc.

Earthing with copper plate 600x600x6mm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)

Extra for charcoal and salt for G.I.plates or copper plate earth electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

SITC of boom barrier Gate -model- SPBB4006M4S LED (Electro Mechanical, Motorised with 6 meer boom (Aluminium Hollow Section 100x44mm) open time 4 sec/RIGHT Installed/ 2nos Remote/1200 times per day,STEEL Housing box with LED ,Support stand,Control PCB) etc as reqd.(Make smart Power)

S/F Diwali LED light(40mtr)

S/F Havells Flexion LED rope light 9405090 (50 mtrs)complete with connection etc as reqd

Cost of 1.5 sqm cu. Wire

VARIETY TRADES COMPLEX

M/S KIM & SONS CONSTRUCTIONS & EQUIPMENTS