Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC R O BALOON BAZAR DALHOUSIE CANTT TEHSIL DALHOUSIE DISTT CHAMBA HIMACHAL PRADESH PIN 176304 | CHAMBA | HIMACHAL PRADESH | 176304 | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹6.8 L+₹1.3 L (23.4%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹8.3 L+₹2.8 L (50.5%)Rejected-Finance | L3 | Rejected-Finance Other than the lowest bid |
Tender Value
₹6.2 L
EMD Value
₹12,480
Closing Date
31 Aug 2023, 6:00 pmClosed
Garrison Engineer (West)
Kabir Road Jalandhar Cantt
PROVN OF BOUNDARY WALL, PATHWAYS AND CERTAIN B/R AND E/M FITMENTS FOR OFFRS MESS AND LIVING ACCN COMPLEX OF 350 INF BDE (P-18) IN THE AOR OF AGE B/R-I UNDER GE (WEST) JRC
2023_MES_611527_1
GE/JAL(W)-52/2023-24
Open Tender
Civil Works
Item Rate
120 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹12,480
Yes
18 Nov 2023
1 Aug 2023
4 Sept 2023
1 Aug 2023
31 Aug 2023
19 Aug 2023
Amount
Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in Hard Dense soil.
M&L PCC 1:4:8 Type D2 (Using 40mm graded stone aggregate in Footings, foundations and mass concreting
M & L Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete.
M&L RCC (Nominal mix) 1:2:4 type B1 (Nominal mix) (using 20mm graded stone aggregate) as in foundation, plinth beams, bases for columns, etc and mass concreting
Formwork to sides and soffits of floor or roof beams, beam hauncnings, bressummers, lintels, cantilevers, shelves incl supports, overhangs etc, also splays betweens floors and beams etc for rough finished flat surfaces of concrete.
Mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete.
Mild steel TMT bars 5mm dia over and upto 10mm as in stirrups for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete.
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces and fihing the surface even and smooth without using extra cement in cm 1:4
Preparing new plastered surfaces on walls and applying two coats of cement based paint
Returning, filling and ramming, including well watering in layers not exc. 25 cm all as specified and directed.
Removing of surplus excavated material to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified.
S&F 35 mm thick ( measured solid) precast cement concrete (1:2:4) type B-0 ( using 12.5) mm graded stone aggregate) as in louvers or jallies incl ornamental pillars set in cement mortar (1:4) including all necessary from work and reinforcement any description complete all as specified and directed by Engr-in-Charge
Demolition of brick or stone masonary built in cement mortar complete
Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises
M&L coloured Glazed ceramic tiles in vertical surface 450 X 300X 7mm thick as in dados set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick cement plaster in CM 1:4.
M/L Non skid Coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exce 0.11 SqM but not exceeding 0.18 SqM in floors etc, set and jointed in neat cement slurry and pinted in white or coloured cement to match with including 15mm thick screed bed in CM 1:6.
Taking up or down existing steel 15 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed
Supplying, fixing, 15 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.
S&F Rimless single piece WC with accessories and cistern fittings size 360 x 685 x 795 mm S trap 300 mm, Cat part No: KUS-WHT-35851SN (inlcuding UF Soft close seat cover, tornado flushing, hinges all as specified and directed. Make : Jaquar (Kubix Series)
S&F angular Stop Cock with wall Flanges Cat Part No KUP-35053PM all as specified and directed. Make : Jaquar (Kubix Prime series)
S&F bib Cock with wall Flanges Cat Part No KUP-35037PM all as specified and directed. Make : Jaquar (Kubix Prime series)
S&F Glass shelf of length 600mm, width 100 mm and thickness not less than 5mm including CP railing and Rawl plugs and screws for fixing complete all as specified and directed. Make: Jaquar.
S&F Corner Glass shelf Cat Pat No: ACN-1173 including CP railing and Rawl plugs and screws for fixing complete all as specified and directed. Make: Jaquar.
S&F brass chromium plated toilet paper holder Cat Part No: ACN - 1151N complete all as specified and directed. Make: Jaquar
S&F brass chromium plated Soap Dish Holder Cat Part No: ACN - 1131N complete all as specified and directed. Make: Jaquar
S&F brass chromium plated towel rail Cat Part No: ACN - 1181 FN fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed. Make: Jaquar
S&F brass chromium plated towel rack Cat Part No: ACN-CHR-1181FN fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.Make: Jaquar
S&F brass chromium plated towel ring Cat Part No: ACN- 1121 N fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed. Make: Jaquar
S&F brass chromium plated Double coat hook Cat Part No: AKP-35761P fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed. Make: Jaquar
S&F brass chromium plated Double arm wall mounted reversible plain/magnifying (X3) Pivotable mirror Cat Part No: ACN - 1193N fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed. Make: Jaquar
S&F in replacement Braded connection pipe 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed.
S&F Single lever Tall Boy with 155mm extension body fixed spout without popup waste system Basin mixer with 600 mm Long Braided Hoses Cat Part No KUP-35005 BPM all as specified and directed. Make: Jaquar (Kubix Prime series)
S&F Single lever wall mixer with provision of hand shower, but without hand shower Cat Part No KUP-35119 PM all as specified and directed. Make: Jaquar (Kubix Prime series)
S&F Maze hand shower 65 x 95 mm rectangular shape single flow (Face plate stainless steel and ABS Body in Chrome Finish) with rubit cleaning system including CP hose pipe 1.20 mtr long Cat Part No HSH-CHR-1657 all as specified and directed. Make: Jaquar
S&F Maze Over head shower 300 x 300 mm Square shape single flow (Body and Face plate stainless steel and ABS Body in Chrome Finish) with rubit cleaning system Cat Part No: OHS-CHR-1639 all as specified and directed. Make: Jaquar
S&F Single lever Concealed Deusch mixer (Divertor) with provision for connection to over head shower only including internal concealed brass kit. Cat Part No: KUP-35227 PM all as specified and directed. Make: Jaquar (Kubix Prime series)
S&F brass chromium plated health faucet Cat Part No: ALD -565 for pedestal pattern water closet including PVC flexible pipe along with complete necessary fittings complete all as specified and as directed. Make: Jaquar
S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.
S&F in repair chromium plated grating 125 x 125 mm Square, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed.
S&F Vitreous china Table top wash hand basin Cat part: ARS-WHT-39903 (Size: 700 x 435 x 135 mm) including chromium plated brass waste coupling and waste pipe all as specifed and directed. Make: Jaquar
S&F Brass CP Tumbler holder Cat Part No AKP-35741P all as specified and directed. Make: Jaquar
Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.
Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , canopies , deck slabs and in shelves and the like complete all as specified and directed.
Mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape require including, cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed
Form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves landing and similar work not exceeding 200 mm thick (horzontal or sloping) and to edges of concrete complete all as specified and directed
M&L for 25 mm thick (Black) granite machine cut as in wash basin counters bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over bedding layer or screed 15 mm thick in cement mortar 1:4 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided for all as specified and directed
Material & Labour for 75 mm thick PCC type D-2, 1:4:8 (using 40 mm graded aggregate), provided for sub base complete all as specified and directed
M&L, sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified
M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement & (Yellow/Red) pigment.
Material & Labour Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastenig Fe-410-W (Gde quality 'A')
M &L for 200mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as spd and directed
M&L for concrete bed for 200mm in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Cutting into existing manholes for connecting new drains(internal dia of pipe 150mm to 225mm making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1,smooth finished and reforming benching.
S&F PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in trenches 110 mm bore fixing in repair including chieselling bricks to take clear the joints inside wall and making good after replacing the pipe or bend
S&F in replacement PVC (SWR) bend of radius for 110mm bore pipes complete all as specified.
S&F in replacement PVC (SWR)PVC (SWR) vent cowl for 110mm bore pipes complete all as specified.
S&F PVC (SWR) pipes single socketed in any length with rubber joints fixed to wallor laid in trenches 75 mm bore fixing in repair.
Taking down Chowkat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by EIC.
Taking down Chowkat or frames n exceeding 1.5 Sqm each complete all as specified and as directed by EIC.
S&F powder coated aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
M&L for 4.80mm thick Frosted glass ordinary quality glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed.
Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors
Taking down unserviceable Submain of any size as directed by Engineer-In-Charge.
Taking down main switch / DB as directed by Engineer-In-Charge.
M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of MODULAR TYPE switch/sockets and regulator and including modular type cover plate white colour all as specified and directed for:- One light / fan / call bell point controlled by one, one way switch.
One 3 pin socket out let 5 Amps on same board with other switches.
One 3 pin socket out let 5 Amps on Independent board with other switches.
All as per item No.68 above but with 2.5 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board
S & F switch MODULAR 6 Amps, flush button type, SP, one way, 230 Volts, AC
S & F switch MODULAR 16 Amps, flush button type, SP, one way, 230 Volts, AC
S & F socket out let multipurpose MODULAR 5 pin 6 Amps, flush type, 230 / 250 Volts
S & F socket out let multipurpose MODULAR 5 pin 6/16 Amps, flush type, 230 / 250 Volts
M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.
Supply and fix DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar.
S/F MCB SPN 32 to 63 Amps 240 volts
S/F MCB SP 6-32 Amps 240 volts
Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed.
S&F LED tube light fitting 10W Slim type with flexible copper conductor of size 0.50mm 3 core complete all as specified and directed.
Supply and Fix recess/ceiling mounting LED light 1x36 Watt cool white ligh of 6500k complete all as specified and directed. Havells /CG/Bajaj
Supply and fixed LED spot light of cap 10Watt all as specified and directed.
Supply and fixed LED decorative type wall light of cap 10 Watt all as specified and directed.
Supply and fixed LED Decorative Bed side lamp of cap 05 Watt complete all as specified and directed.
Supply and fixed LED Decorative strip type cup board light of cap 05 Watt complete all as specified and directed.
Supply and fixed Wall fan 450mm sweep complete all as specifed and directed.
Supply & fix Exhaust fan Plastic body AC single phase 230/ 240 V of size 225mm sweep all as specified and directed. Make : Havell's/CG/Orient
PANKAJ MITTAL
AAY KAY Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .