C/O Additional Accomodation in Senior Secondary School building at Ganol in Tehsil and Distt Solan (HP)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Half brick masonary with common burnt clay FPS (non modular) brick of class designation 7.5 in superstructure above plinth level upto all floor level in cement mortar l:4 i/c all leads,lifts and carriage of materials Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and Fixing door frame of NCL series-5000 frame shall be roll formed section made of galvanised stee-powder coated (base steel as per IS 513-D) quality galvanised as per 277 with Zine of 120gms/sqm powder coated with pure polyster powder upto 50-60 with micron thick the overall size should be 125x60 mm for double rebate 4"powder coated hinges including fixing in position and filling the frame with polythene foam as per the direction of Engineer in charge including carriage of material within all leads and lifts

Providing and fixing ISI marked flush door shutters conforming to IS:202(Part-I)non-decorative type, core of block board construction with frame of Ist class hard work wood and well matched commercial 3ply vereering with vertical grains or cross bands and face veneers on both faces of shutters:2nd class teak wood 35mm thick including ISI marked stainless steel butt hinges with necessary screws.including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing steel window made of frame with M.S. Channel 75mm x 40mm and M.S. Flat 75mm x 40mm in combination welded together and standard section F-7B style of standard size with sash bar T-section 25mm x 25mm x3mm and angle iron 25mm x 3mm joints meterd and welded with 16mm x 3.5mm lugs 10cm long embeded in C.C. block 1:3:6 (1 cement : 3 sand : 6 stone aggregates ) or with wooden plug and screw or rawl plug and screw or with clips or with bolts and nuts as required and MS iron fittings complete including P/F glass pan 4mm thick in glazed and wire gauge of desidnation 85 with 0.56mm dia in wire gauge panel with glazing clips and special metal sah putty of approved make complete and applying a coat of approved steel primer after pretreatment of the surface complete job in all respect as per architectural drawing including carriage of materials with in all leads lifts as per direction of Engieer-in-Charge.

Providing and laying Mirror polished Kotah stone 550x550 mm flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (icement: 4 coarse sand) : 25 mm thick including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Proving and laying Mirror polished Kota stone 550x550mm slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

6mm (Six) millimeters thick plaster to ceiling in cement mortar 1:3(One cement: Three sand), as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

15 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all floors heights including arrises.internal rounded angles, chamfers and/or rounded angles not exceeding 80(Eighty)millimeters in girth and finished even and smooth in cement mortar 1:6(0ne cement: Six sand),as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

15 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering up to all floors heights including arrises.internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty)millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand), as per HP.PWD.specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.