REPAIR TO INTERNAL ROAD AND ROAD FURNITURE IN IMTRAT UNDER GE (AF) HASIMARA

Amount

SCHEDULE 'A' PART-I Surface dressing n.exc 15 cm deep as in soft/loose soil complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exc 50 mm and n.exc 100 mm deep and area n.exc 400 sqm complete all as specified and directed.

Screening road metal, chippings, etc on the site of the work, as ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured) complete all as specified and directed.

M & L for 7.5 cm thick (compacted thickness) WBM, with coarse aggregate of grading 2 (63 to 40mm size) with lime stone, sand stone, flint or quartzite, spread, rolled and consolidated to gradient and camber required with 8 to 10 tonne power roller complete all as specified and as directed.

All as per Item 04 above but except materials complete ditto. (Note : Serviceable stone metals shall be obtained from Item No 3 above)

Preparing un-surfaced WBM surfaces by brushing with wire brush for removing caked/mud etc. sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. complete all as specified and directed.

All as per item No 06 above but on black top surfaces complete ditto.

M & L for applying evenly a priming/tack coat with cationic bitumen @ 5 Kg per 10 Sqm complete all as specified and directed.

M & L for applying evenly a priming/tack coat with cationic bitumen @ 2.5 Kg per 10 Sqm complete all as specified and directed.

M & L for bituminous premixed semi dense asphaltic concrete, 40 mm consolidated thickness with 5.5% binder content by weight of total mix using CRMB-55 grade of bitumen, rolled and compacted, mixed in mechanical hot mixed plant and pre-mixed material laid by using mechanical paver, finished including rolling to required gradient and camber with 8 to 10 tonne power roller to required compaction complete all as specified and directed.

M & L for add or deduct over serial item No. 10 above for each extra/less kg of binder used complete ditto

S & F retro reflector road cats eye of size 118x70x20mm with fine grained micro particles of regular size with bottom portion with two shank embeded on road surface nusing cut back bitumen emulsion fixed on the road as per manufacturer's instructions including making good the disturbed surfaces of the road complete all as specified and as directed by the Engineer-in-Charge. (Make: STP/3M/AUTO/STIMSONITE/TATA BP)

S & F delinator made out of 50 mm dia powder coated MS pipe top mounted with 100 mm dia reflector with high quality reflective tap and covered by MS mesh of size 750 mm high and embeded in PCC 1:3:6, type C-1 (using 20mm graded aggregate) of suitable size including necessary excavation and earth work complete all as specified and as directed by the Engineer-in-Charge. (Make: STP/3M/AUTO/STIMSONITE/TATA BP/Dark Eye/Greenlite)

S & F solar road stud of size 132x120x20mm, made up of aluminium alloy sheel transparent plastic with solar panel of 0.4 Watt capacity, one rechargeable battery (1.2V/1200Ma) and six numbers super bright LEDs of having light intensity and view distance 8000 to 10000 MCD over 500m of colour Amber/Red/Blue/Green/White and working hours upto 50 to 60 hours successively after the battery is fully charged fixed with MS pin inserted while fixing on road complete all as specified and as directed by the Engineer-in-Charge. (Make: STP/3M/AUTO/STIMSONITE/TATA BP/Dark Eye/Greenlite)

Material and labour for 3mm thick painting to road surfaces as in lines, dashes, arrows, letters, zebra crossing etc on road, pavements and like etc with thermoplastic road marking paint including applying type-II glass beads dispensed from the in-built dispenser unit @ 250-300 gms/Sqm simultaneously complete all as per manufacturer's instructions and as directed. (Note: Both the application shall be carried out through mechanical appliances by the approved applicator of the manufacturer of paint) (Make: STP/3M/or equivelant as approved)

Dismantling Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid dry or laid dry and pointed complete all as directed by the Engr-in-Charge.

M & L for Continuous brick edging using old size brick burnt clay of, sub-class ‘B’ (locally available best quality), with width equal to the width of the brick laid dry on end vertically including complete all as specified and directed.

All as per item No 17 above but except brick complete ditto. (Note: Old serviceable brick as obtained from dismantling shall be re-use at site after cleaning)

M & L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of flooring, etc complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

CONSTRUCTION SHELTER

M/S BIJAY KUMAR SHIVA

T. P. ANIL KUMAR

M/S DEY ENTERPRISE

M/S MANODEEP CONSTRUCTION

M/S SARDAR MAL NAHATA

M/S JAGDISH PRASAD AGARWALA