MISC REPAIRS TO STEEL FURNITURE INCLUDING PAINTING AND POLISHING AT KOLKATA AREA UNDER GE NORTH KOLKATA

Amount

Drg No : (FD-67(M)/1031 Repair of Almirah large Steel with shelves as appended below : Removing of existing u/s fitting/fixtures of Almirah large steel and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 16 Gauge CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL/ Tisco

Leg of 16 gauge CRCA sheet. Note:- Each leg will be measured as one unit.

Locking device (except MS rod & lock) Make:- Godrej / Harrison / Link

MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah

Chromium plate handle. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset

MS hinges of size 75mm, made of 1.6 mm thick MS sheet

Lock 6 lever with duplicate key ( Make- Harison/ Link /Godrej).

MS cleats & pin

Shelves made out of 1mm thick ms sheets. Note:- Each shelve will be measured as one Unit.

Shutter made out of 1mm thick ms sheets. Note:- Each shutter will be measured as one unit

Drg No.:- (FD-67(M)/1032 Repair of Almirah Medium Steel with shelves as appended below : Removing of existing u/s fitting/fixtures of Almirah medium steel and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 16 Gauge CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL/ Tisco

Leg of 16 gauge CRCA sheet Note:- Each Leg will be measured as one unit

Locking device (except MS rod & lock) Make:- Godrej / Harrison / Link

MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah

Chromium plate handle, Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset

MS hinges of size 75mm, made of 1.6 mm thick MS sheet Note:- Each hinge will be measured as one unit.

Lock 6 lever with duplicate key. ( Make- Harison/ Link /Godrej).

MS cleats & pin

Shelves made out of 1mm thick ms sheets Note:- Each shelve will be measured as one Unit.

Shutter made out of 1mm thick ms sheets Note:- Each shutter will be measured as one unit

Drg No.:- FD-69(M) Repairs to Book Shelf open small steel for the following :- Removing old u/s fitting /Fixture of Book shelf open small steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed. Make of paint:- Asian / Berger / Jenson & Nicholson / Shalimar

Shelves made out of 1mm thick MS sheet complete all as specified and shown on drawings. Note:- Each shelve will be measured as one unit.

Complete Slotted angle of 25mm x25mm x 3mm thick Mild Steel Sheet. Note:- Complete Slotted angle required for book shelf will be measured as one unit

Corner of 75mm x75 mm x 3 mm thick Mild Steel Sheet. Note:- Each corner will be measured as one Unit.

Side of Mild Steel Sheet. Note:- Each side will be measured as one unit.

Cutting u/s portion of slotted angle and Supply and weld Slotted angle of 25mm x25mm x 3mm thick 100 mm long with existing angle in base Note:- Each slotted angle shall be measured as one unit.

Drg No:- FD-69(M) Repairs to Book Shelf open Large Steel for the following :- Removing old u/s fitting /Fixture of Book shelf open large steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed, Make of paint:- Asian / Berger / Jenson & Nicholson / Shalimar

Shelves made out of 1mm thick MS sheet complete all as specified and shown on drawings. Note:- Each shelve will be measured as one unit.

Compelete Slotted angle of 25mm x25mm x 3mm thick Mild Steel Sheet, Note:- Compelete Slotted angle of shelf shall be measured as on unit.

Corner of 75mm x75 mm x 3 mm thick Mild Steel Sheet. Note:- Each corner will be measured as one unit.

Side of Mild Steel Sheet. Note:- Each side will be measured as one unit.

Cutting u/s portion of slotted angle and Supply and weld Slotted angle of 25mm x25mm x 3mm thick 100 mm long with existing angle in base. Note:- Each slotted angle shall be measured as one unit.

Drg No:- (FD-75M) Repairs to Chair Tubular Steel with arms (Chair CBA) for the following :- Removing old u/s fitting /Fixture of Chair CBA steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed. Make of paint:- Asian / Berger / Jenson & Nicholson / Shalimar.

Supply & Fix seat frame of chair CB steel with arm made up with well seasoned 2nd class hard wood free from cracks, knot and canning with best quality half round white plastic cane 2mm wide and 4mm wide at border ( canning shall be of Godrej Pattern) and applying french polish including prepration of surfaces and obtaining optimum finished surface after taking out old unserviceable seat complete all as specified shown on drawing. Make of cane:- Super, Arihant / Premier/ Maharashtra Cane.

Supply & Fix back frame of chair CB steel with arm made up with well seasoned 2nd class hard wood free from cracks, knot and canning with best quality half round white plastic cane 2mm wide and 4mm wide at border ( canning shall be of Godrej Pattern) and applying french polish including prepration of surfaces and obtaining optimum finished surface after taking out old unserviceable back complete all as specified shown on drawing. Make of cane:- Super, Arihant / Premier/ Maharashtra Cane.

Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat of 6 mm thick BWR grade plywood, bearing ISI mark, and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.

Complete Back 50 mm thick synthetic foam of 32 density made to shape for back of 6 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality. Make for Plywood for item Nos. 5.03 & 5.04 :- Sudarshan Plywood Industries, white House, 119 Park Street, Kolkata – 700 019. /National Plywood Inds Pvt Ltd, S Fancy Lane, 8th Floor, Kolkata – 700 001./ M/s Alishan Veneer & Plywood Ltd., 46 BB Ganguly Street , Kolkaya – 12 / M/s Green Ply Industries Ltd., / Century Ply / Sylvan Ply

Wooden Handles with 10 mm thick synthetic foam of 32 density made to shape for wooden handle and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.

Taking out old Unserviceable arm rest of chair CB steel with arm and Supply & Fix new arm rest made of well seasoned first class hard wood, teak wood, and applying french polish,glossy finish including prepration of surfaces and obtaining optimum finished surface complete all as specified and shown on drawing.

Supply & Fix MS flat iron Stiffeners of 20 X3 mm thick, two numbers in each seat and back shall be welded to frame of chair as directed by GE of required size complete. Make for MS flat Iron:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Welding to frames wherever required at cracked/broken portion

Drg No. (FD-75M) Repairs to Chair Tubular Steel without arms (Chair CB) for the following :- Removing old u/s fitting /Fixture of Chair CB without arm steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed. Make for Paint:- Asian / Berger / Jenson & Nicholson / Shalimar.

Supply & Fix seat frame of chair CB steel with arm made up with well seasoned 2nd class hard wood free from cracks, knot and canning with best quality half round white plastic cane 2mm wide and 4mm wide at border ( canning shall be of Godrej Pattern) and applying french polish including prepration of surfaces and obtaining optimum finished surface after taking out old unserviceable seat complete all as specified shown on drawing. Make of cane:- Super, Arihant / Premier/ Maharashtra Cane. Note:- each Seat frame frame of chair shall be measured as one unit.

Supply & Fix back frame of chair CB steel with arm made up with well seasoned 2nd class hard wood free from cracks, knot and canning with best quality half round white plastic cane 2mm wide and 4mm wide at border ( canning shall be of Godrej Pattern) and applying french polish including prepration of surfaces and obtaining optimum finished surface after taking out old unserviceable back complete all as specified shown on drawing. Note:- each back frame of chair shall be measured as one unit. Make of cane:- Super, Arihant / Premier/ Maharashtra Cane.

Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat of 6 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.

Complete Back 50 mm thick synthetic foam of 32 density made to shape for back of 6 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.

Supply & Fix flat iron Stiffeners of 20 X3 mm thick, two numbers in each seat and back shall be welded to frame of chair as directed by GE of required size complete. Make for MS flat Iron:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal.

Welding to frames wherever required at cracked/broken portion

Drg No:- FD/MAP/II/06 Repairs to Chair Varandah for the following :-

Removing of old usnsv PVC sheet & back from Chair Varandah and prepare the conduit structure for painting by scrapping the old surface and painting with white synthetic enamal paint over a coat of white primer complete as directed.

Weaving the seat and back of Chair Varandah in Godrej pattern with 4 mm wide approved quality cane on steel surface of chair complete all as specified and as directed.

Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed.

Supply and fixing 20 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed

Welding to frames wherever required at cracked/broken portion

Drg No:- (FD-220/ 220 (R) / CZ/TD/556:- Repairs to Charpoy GI Pipe for the following

Taking out broken/ u/s long rails from Charpoy GI pipe and Supply and fixing new long rails 1940 mm long duly threaded at both end out of GI tube 32mm dia medium grade all as spacified and directed. Make for GE Pipe:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

Taking out u/s short rails from Charpoy GI pipe and making short rails for GI charpoy made out of from broken long rails obtained from Charpoy including cutting & threading rails and fixing in replacement all as spacified and directed.

Taking out u/s legs from Charpoy GI pipe and making legs for GI charpoy made out of from broken short rails obtained from Charpoy including cutting & threading rails and fixing in replacement all as spacified and directed.

Taking out u/s check nut from long rails and S&F new check nuts of 6 mm wide,32 mm dia all as spacified and directed. Note:- Each check nut will be measured as one unit.

Removing of old existing u/s newar from charpoy GI pipe , tightening the frame including welding whereever required and S&F new ply wood 12 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed.

Removing of old existing u/s ply top from charpoy GI/ MS squre pipe , tightening the frame including welding whereever required and S&F new ply wood 12 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed. Make of plywood for item Nos. 8.05 & 8.06:- Sudarshan Plywood Industries, white House, 119 Park Street, Kolkata – 700 019. /National Plywood Inds Pvt Ltd, S Fancy Lane, 8th Floor, Kolkata – 700 001./ M/s Alishan Veneer & Plywood Ltd., 46 BB Ganguly Street , Kolkaya – 12 / M/s Green Ply Industries Ltd., / Century Ply / Sylvan Ply

Supply and fixing Stiffener 02 Nos in each charpoy of 40 mm wide and 6mm thick MS flat iron welded to GI Charpoy frame perpendicular to long rail of approprate size on equal distance duly applying two coatss of black paint over a coat of red oxide,and 4 Nos of MS flat 100mmx25mmx6mm to be welded to the short rail for fixing ply wood all as spacified and directed.

Welding to frames wherever required at cracked/broken portion all as directed

Drg No.:- FD/E6/MAP/01 Repairs to Chair Computer for the following :- Removing old u/s fitting /Fixture of Chair Computer and supply and fixing new items All complete specified shown on drawing and directed.

Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality

Complete Back 50 mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality

PVC Base Five stae alongwith wheels

Revolving wheels

Hydrolic System with accessories (Air soft)

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality. Cost of tapestry cloth shall not be less than Rs, 300 per Sqm

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.Cost of tapestry cloth shall not be less than Rs, 300 per Sqm

Drg No.:- FD/E6/MAP/01 Repairs to Chair Steel Visitor for the following :- Removing old u/s fitting /Fixture of Chair Executive visitor (Chair Writing Steel) such as seat,back etc and supply and fixing new items All complete specified shown on drawing and directed

Complete Seat 50mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.

Complete Back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.

Seat support mild steel strip 450mm x 20 mm x 03 mm with screw applying two coats of Synthetic enamel paint over a coat of red oxide.

Arms rest complete.

Welding to frames wherever required at cracked/broken portion

S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality, Cost of tapestry cloth shall not be less than Rs, 300 per Sqm

S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality , Cost of tapestry cloth shall not be less than Rs, 300 per Sqm

Drg No.:- FD/E6/MAP/01 Repairs to Chair school with Hand Board for the following :- Removing old u/s fitting /Fixture of Chair school with hand Board and supply and fixing new items All complete specified shown on drawing and directed.

Complete Writing Pad made of 18mm thick Pre laminated Particle board, exteriro grade, with one face decorative face and other side balancing white, alongwith 5mm thick wooden beading and fixing with chair handle with suitable hinges. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Merinova / M/s Green Ply Industries Ltd / Eco-board / Archid Lam / Century Lam / Shirdi Industries Ltd (ASIS).

Welding to frames wherever required at cracked/broken portion all as directed

Supply & fix New PVC Seat and Back including taking out old unserviceable seat and back complete all as specified and as shown on drawing. Make:-

Drg No.:- FD-1029 Repairs to Locker bed side steel Steel for the following :- Removing old u/s fitting /Fixture of Locker bed side steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed

Leg made of 16 gauge CRCA sheet including necessary welding complete all as specified and shown on drawing. Note:- Each leg will be measured as one unit.

MS hinges of size 75mm of 1.6mm thick MS sheet duly welded reveling . Note:- Each hinge will be measured as one unit.

Mild Steel Shelves. Note:- Each shelve shall be measured as one unit.

Mild Steel Butt Hinges 50mm. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..

Complete Shutter

CP Hanging Rod ( conduct pipe) 20 mm dia 1.6mm thick Make:- Kohler / Parryware / Grohe / Bluestar silver line / Shakti Enterprises..

Socket of CP for Hanging rod 20 mm dia

Chromium plated Handle 100mm with bolts, Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..

Repairs to Rack steel skeleton 7'-3"X 36"X18" for the following :- Removing old u/s fitting /Fixture of Rack steel skeleton and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed.

Shelves of made out of 1mm thick MS sheet complete all as specified and shown on drawings. Note:- Each shelve shall be measured as one unit,

Repairs to Rack Stationary steel for the following :- Removing old u/s fitting /Fixture of Rack stationary steel and supply and fixing new items applying two coats of synthetic enamel paint, first quality, over a coat of red oxide primer all complete specified shown on drawing and directed. Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.

Shelves made out of 1mm thick MS sheet complete all as specified and shown on drawings. Note:- Each shelve will be measured as one unit,

Repairs to Rack Steel 6'3"x36"x24" (6 Shelves) for the following :- Removing old u/s fitting /Fixture of Rack steel and supply and fixing new items applying two coats of synthetic enamel paint, first quality, over a coat of red oxide primer all complete specified shown on drawing and directed. Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.

Shelves made out of 1mm thick MS sheet complete all as specified and shown on drawings. Note:- Each shelve will be measured as one unit,

Repairs to Rack Record for the following :- Removing old u/s fitting /Fixture of Rack Record and supply and fixing new items applying two coats of synthetic enamel paint, first quality, over a coat of red oxide primer all complete specified shown on drawing and directed. Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.

Shelves made out of 1mm thick MS sheet complete all as specified and shown on drawings. Note:- Each shelve will be measured as one unit,

Repairs to Rack steel 6'x3' for the following :- Removing old u/s fitting /Fixture of Rack steel and supply and fixing new items applying two coats of synthetic enamel paint, first quality, over a coat of red oxide primer all complete specified shown on drawing and directed. Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.

Shelves made out of 1mm thick MS sheet complete all as specified and shown on drawings. Note:- Each shelve will be measured as one unit,

Repairs to Rack side three space Steel for the following :- Removing old u/s fitting /Fixture of Rack side three space steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed. Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.

Shelves made out of 1mm thick MS sheet complete all as specified and shown on drawings. Note:- Each shelve will be measured as one unit,

Drg No.:- (FD-MAP/02) Repairs to Rack shoe steel for the following:-Taking down existing U/S fitting/fixtures of Shoe Rack and refixing/ welding and minor repair applying two coats of synthetic enamel paint, first quality, over one coat of red oxide, all complete as specified and asspecified Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.

Net Shelve Note:- Each shelve will be measured as one unit,

Welding to frame wherever required complete all as directed.

Rubber Shoe

Drg No. :- FD-84 (M) FD- 1003 Repair of Table office officer steel as appended below : Taking down existing U/S fitting/fixtures of Table office officer Steel and refixing/welding with new items and minor repair dully applying two coats of synthetic enamel paint, first quality, over a coat of red oxide all complete specified shown on drawing and directed. Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.

Top of 18/19mm thick Prelaminated particle Board Exterior Grade, with one side decorative face and other face balancing, with 4 mm thick teak wood edging with french polishing, glossy finish, all around as in table top complete all as specified and as shown on drawing. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Merinova / M/s Green Ply Industries Ltd / Novapan / Archid Lam / Century Lam

Lock 4 lever with duplicate key Make: Harison / Link / Godrej

Drawers made out of 1mm thick MS sheet including spray painting using synthetic enamel paint , first quality, after preparation of surface and obtaining optimum finish surfac complete all as specified and shown on drawing. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.

Supply & Fix PVC toe shoes for bottom of leg, standard quality, complete all as specified and shown on drawings.

Drg No. :- FD 84 (M) FD 1004 Repair of Table office Clerk steel as appended below : Taking down existing U/S fitting/fixtures of Table office Clerk Steel and refixing/welding with new items and minor repair dully applying two coats of synthetic enamel paint, first quality, over a coat of red oxide all complete specified shown on drawing and directed. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

Top of 18/19mm thick Prelaminated particle Board Exterior Grade , one side decorative face and other face balancing white, 4 mm thick teak wood edging with french polishing, glossy finish, all around as in table top complete all as specified and as shown on drawing. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Green Ply / Novapan / Archid Lam / Century Lam

Lock 4 lever with duplicate key Make: Harison / Link / Godrej

Drawers made out of 1mm thick MS sheet including spray painting using synthetic enamel paint after preparation of surface and obtaining optimum finish surfac complete all as specified and shown on drawing. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.

Supply & Fix PVC toe shoes for bottom of leg , standard quality, complete all as specified and shown on drawings.

Drg No. :- FD-165 Repairs to Table dining ORs for the following :- Removing old u/s fitting /Fixture of Table Dining ORs steel and supply and fixing new items applying two coats of synthetic enamel paint , first quality, over a coat of red oxide primer all complete specified shown on drawing and directed.

Top of 18/19mm thick Prelaminated particle Board Exterior Grade, one side decorative face and other face balancing white 4 mm thick teak wood edging with french polishing, glossy finish, all around as in table top complete all as specified and as shown on drawing. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Green Ply / Novapan / Archid Lam / Century Lam

Leg made out 25mm X 25mm (16 gauge) square tube with welded including spray paint and obtaining optimum finished surface complete over a coat of red oxide primer using synthetic enamel paint, first quality, complete all as specified and shown on drawing. Note:- Each Leg will be measured as one unit.

Welding to frames wherever required at cracked/broken portion

Drg No. :- (FD-1008/1009) Repair of Table 900x600x760 with and without Drawer steel as appended below : Taking down existing U/S fitting/ fixtures of Table 900x600mm with and w/o drawer Steel and refixing /welding with new items and minor repair all complete specified shown on drawing & directed

Top of 18/ 19 mm, thick Pre laminated Particle Board, Exterior Grade, one side decorative face and other face balancing white alongwith 5mm teak wood Beading, including spray paint and obtaining optimum finished surface complete over a coat of red oxide primer using synthetic enamel paint, first quality, complete all as specified and shown on drawing. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.

Drawer made of 1 mm thick MS Sheet

Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.

Brass lock for drawer with duplicate key Make:_ Godrej / Harrison / Link

Replacement of Rubber shoes with new one, standard quality,

Removing of old existing u/s Ply top from Charpoy IP /MS Square tubular , tightening the frame including welding whereever required and S&F new ply wood 12 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed. Make of plywood:-Sudarshan Plywood Industries, white House, 119 Park Street, Kolkata – 700 019. /National Plywood Inds Pvt Ltd, S Fancy Lane, 8th Floor, Kolkata – 700 001./ M/s Alishan Veneer & Plywood Ltd., 46 BB Ganguly Street , Kolkaya – 12 / M/s Green Ply Industries Ltd., / Century Ply / Sylvan Ply

Removing of old existing u/s plywood from Charpoy Folding IP with Hard top , tightening the frame including welding whereever required and S&F new ply wood 8 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed. Make of plywood:- Sudarshan Plywood Industries, white House, 119 Park Street, Kolkata – 700 019. /National Plywood Inds Pvt Ltd, S Fancy Lane, 8th Floor, Kolkata – 700 001./ M/s Alishan Veneer & Plywood Ltd., 46 BB Ganguly Street , Kolkaya – 12 / M/s Green Ply Industries Ltd., / Century Ply / Sylvan Ply

Material & Labour for preparing & polishing of new or old wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved All as specified in particular specifications and as shown on drawing and as directed by EIC for the following wooden furniture:- Make of Polish:- Sheenlac / Naidu / make as approved by the GE.

Almirah large Steel with shelves (FD-67(M)/1031

Almirah large Steel with shelves (FD-67(M)/1031 (Outside Only)

Almirah Midium Steel with shelves (FD-67(M)/1032

Almirah Midium Steel with shelves (FD-67(M)/1032 (Outside only)

Almirah large Steel 1/2 H 1/2 shelves (FD-1033)

Almirah large Steel 1/2 H 1/2 shelves (FD-1033 (Outside Only)

Book Shelf open small steel FD-69(M)

Book Shelf open Large steel FD-69(M)

CHAIR CB STEEL WITH ARMS FD-75(M)

CHAIR CB STEEL WITHOUT ARMS FD-75(M)

Chair Visitor

Chair school with Hand Board

Charpoy

Charpoy IP Folding

Locker bed side steel FD-1029

Locker bed side steel FD-1029 (outside Only)

Rack steel skeleton 7'-3"X 36"X18"

Rack Stationary steel FD-81(M)

Rack Steel 6'3"x36"x24" (6 Shelves) (TP)

Rack Record Steel (TP)

Rack steel 6'x3' (6 Tier)

Rack Shoe Steel (FD-MAP/02)

Rack side three space FD-97(M)

Table office Officer steel

Table office Clerk steel

Table dining Ors Steel FD-165

Table 900x600x760 with Drawer steel (FD-1008)

Table 900x600x760 without Drawer steel (FD-1009)

ARISTO STEEL FURNITURE WORKS

M/s SK Construction

B N ENTERPRISE

P N GUPTA AND SONS

MERCANTILE AGENCY

SOVA ENTERPRISE

TIMBA

UNIVERSAL TRADING CENTRE