1.REPAIRS TO ANGANWADI BUILDING IN PAMPAKKAI HABITATION 2.REPAIRS TO ANGANWADI BUILDING IN ELANGUDI HABITATION 3. BLACK TOPPING AKKARAI NADU THERU ROAD AT 4.BLACK TOPPING TO OCHERI AD THERU

Amount

1.REPAIRS TO ANGANWADI BUILDING IN PAMPAKKAI HABITATION

Dismantling the Damaged for wall Plastering Removing away from the site including all charges etc for completed

Dismantling damaged Flooring Chippingand clearaing away from site including all labour charges etc.,

Plastering with Cement Morter 1:5mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Plastering with Cement Mortar 1:3 (One cement and Five M.Sand), 10mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete for 100 Sqm

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Painting two coats with approved Plastic Emulsion paint over one coat of Primaring coat over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. (S.I No. 359 B)

Painting two coat of new OLD IRON works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete.

Painting two coats with approved Black Oxide for Old Black board

Repairs to Steel Door including cost and conveynace and all all labour charge etc., completed

window

ventilator

Provision for Electrical Arrangement

Tube Light

Bulk Head Fitting

Provision for Water supply arrangement

200 Liters

Labour Charges Water supply and Electrical Arrangement

Provision for Drawing

Provision for Name board

Plinth Protection

Earth work excavation in hard stiff clay soil with initial lead and lift as per SS20A for fondation

Filling with good river sand including cost, conveyance for all materials & labour charges etc complete

CC 1:4:8 mix using 40 mm ISS HBG metal including cost of all materials & labour charges etc complete

Brick work in cement mortar 1:5 mix using country bricks 83/4"x43/8"x23/4" including cost of all materials & labour charges etc complete

CC 1:2:4 mix using 20 mm ISS HBG metal including cost of all materials & labour charges etc complete

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

2.REPAIRS TO ANGANWADI BUILDING IN ELANGUDI HABITATION

Dismantling the Damaged for wall Plastering Removing away from the site including all charges etc for completed

Plastering with Cement Morter 1:5mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Plastering with Cement Mortar 1:3 (One cement and Five M.Sand), 10mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete for 100 Sqm

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Painting two coats with approved Plastic Emulsion paint over one coat of Primaring coat over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. (S.I No. 359 B)

Painting two coat of new OLD IRON works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete.

Painting two coats with approved Black Oxide for Old Black board

Repairs to Steel Door including cost and conveynace and all all labour charge etc., completed

window

WELDMESH

Provision for Electrical Arrangement

Tube Light

Bulk Head Fitting

Provision for Drawing BALA PAINTING

Plinth Protection

Earth work excavation in hard stiff clay soil with initial lead and lift as per SS20A for fondation

Filling with good river sand including cost, conveyance for all materials & labour charges etc complete

CC 1:4:8 mix using 40 mm ISS HBG metal including cost of all materials & labour charges etc complete

Brick work in cement mortar 1:5 mix using country bricks 83/4"x43/8"x23/4" including cost of all materials & labour charges etc complete

CC 1:2:4 mix using 20 mm ISS HBG metal including cost of all materials & labour charges etc complete

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Provision for Name board charges

4.BLACK TOPPING AKKARAI NADU THERU ROAD AT AMMAIYAPPAN PANCHAYAT

Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m

Providing and laying Water Bound Macadam Grading - III(63mm to11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I(Mix -in - place method) Rate for 10sqm

Applying TACK COAT over WBM surface at 4Kg / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Providing and layiing pre-mix carpet 20mm thickness using 0.18cum of 13.2 IRC machine crushed metal 0.09cum of 11.2mm IRC machine crushed metal with 14.60Kg of Bitumen for pre-mixing 10 sqm of pre-mix carpet and laying separately Seal coat type "A" using .09 cum of 6.70mm IRC HBG chips with 9.80 Kg of Bitumen for 10sqm including cost and conveyance of materials to the departmental metric gauge for pre-measurement heating the bitumen boiler heating the aggregate and mixing them with bitumen in mini hot mix plant for pre-mix carpet and rolling by 80-100 KN power roller including labour charges for spreading hire and fuel charges for mini hot mix plant, bitumen boiler, all other tools and plants employed etc., complete

Providing gravel soling to both sides of the road including cost of gravel , conveyance charges , stacking charges, spreading & compacting charges etc complete SIDE BERMS etc

Provision For Name Board

5.BLACK TOPPING TO OCHERI AD THERU ROAD AT AMMAIYAPPAN PANCHAYAT

Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m

Providing and laying Water Bound Macadam Grading - III(63mm to11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I(Mix -in - place method) Rate for 10sqm

Applying TACK COAT over WBM surface at 4Kg / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Providing and layiing pre-mix carpet 20mm thickness using 0.18cum of 13.2 IRC machine crushed metal 0.09cum of 11.2mm IRC machine crushed metal with 14.60Kg of Bitumen for pre-mixing 10 sqm of pre-mix carpet and laying separately Seal coat type "A" using .09 cum of 6.70mm IRC HBG chips with 9.80 Kg of Bitumen for 10sqm including cost and conveyance of materials to the departmental metric gauge for pre-measurement heating the bitumen boiler heating the aggregate and mixing them with bitumen in mini hot mix plant for pre-mix carpet and rolling by 80-100 KN power roller including labour charges for spreading hire and fuel charges for mini hot mix plant, bitumen boiler, all other tools and plants employed etc., complete

Providing gravel soling to both sides of the road including cost of gravel , conveyance charges , stacking charges, spreading & compacting charges etc complete SIDE BERMS etc

Provision For Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

SRA ENTERPRISES (BID ID -1219451)