CONSTRUCTION OF PROCESSING SHED 144.37 SQM

Excavation for foundotion in earth, soil of all types, sand, grovel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building oreo and stocking and spreading as directed, dewotering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting efc. complete. (Lift upto 1.J m.) By Mechanical Means. (INo21-02, PgNo 153) (STATE SSR ) Item Spec: (Bd-A.1 Page No. 259)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and struning etc. complete. (Lift upto 1.50 m) By Mechanical Mean. (INo 21-06, PgNo 153) (STATE SSR ) Item Spec: (Bd.A.2 Page No. 259)

Providing and laying Cost in situ/Ready Mix cement concrete in M-10 of trap/ granitel quartzitel gneiss metal for foundation and bedding Including boiling out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (I. No 24-01, PgNo 226) ( STATE SSR ) Item Spec: (Bd. E. Page No. 287)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, gri||age and footings of R.C.C. columns and steel stonchions efc. including bailing out water, Steel centering, formwork , cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement ond structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixerj etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc.

Providlng and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailled designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed efc)

Providing and laying Cost in situ/Ready Mix cement concrete M-20 of trap / Granite / quartzite / gneiss metal for RCC beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compaction and roughening the surfoce if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structurol steel). with fully automatic micro professor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plont (Pan mixer) etc. complete. With fine aggregate (Natural Sond / Crushed sond VSI Grade finely woshed etc) (I NO. 25-50, PgNo 234) (STATE SSR ) ltem Spec: (Bd.F.6 Page No. 300 and B.7, Poge NO. 38)

Providing and costing in situ cement concrete M-20 of trap/Granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Bd.F.8 Page No.302 and B.7,Poge No.38

Providing and laying in situ cement concrete M-20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen etc. complete. SSR 2019-20 Item No. 33.30.

Providing and fixing In position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bass, binding with wires or tack welding and supporting as required complete (INo 26-33, PgNo 245) (STATE SSR ) Item Spec: (Bd.F.17, Poge No. 306)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joint, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No.315

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm, to 20cm, including watering and compaction etc. complete. (IN0 21-37, PgNo 201 ) (STATE SSR ) Item Spec. (Bd. A.11 Page No. 283)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. Complete

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (INo 32-04. PgNo 268) ( STATE SSR ) ltem Spec: (Bd. L.2 Page No. 368)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete...... (lNo32-11), PgNo 269) ( STATE SSR) ltem Spec: (Bd.L.7 Poge No. 369)

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.e... (lNo36-11, PgNo 291) (STATE SSR ).Item Spec: (Bd.PI Poge No. 413

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete..Spec.No.: Bd.0.8/Page No.406

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)...(As directed by Engineer in Charge)

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) (INo39-24, PgNo 318) ( STATE SSR) ltem Spec: (Bd.T.55, Poge No. 510)

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing withouf hot dip zinc coating including fabricating glazing with plain / obscured glass panes and approved type and quality and iron oxidized fixtures and fastening oil point 2 coats etc. complete.BrJ. T. .’iñ, Pmge No, 509 & As directed by Engineer in charge.

Royalty for sand

Royalty Charges for HARD MURUM

Royalty Charges for RUBBLE

Cement - Fineness, Standard Consistency, Setting Time (Initial & Final ), Compressive strength, Soundness

M-20 Mix Design with all tests on basic materials

M-20 Concrete cube compressive strength (Set of 3 Cubes)