Road Safety Work of Bilrayan Panwari Road Sh-21

Painting approve superiyar quality RCC Median one coat of ready mixed paint including supply of all materials, labour and T&P etc. required for proper completion of the work paint to be used should confirm to the I.S.I. no- 103-1950 ( S.I. No-644+645)

Providing and laying hot applied thermoplastic compound 2.5 mm thick including refectorising glass beads @ 250gms pe sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 the finised surface to the level, uniform and ree from streaks and holes.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (STRAFFIC SIGNS - Stop)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (TRAFFIC SIGNS - MAXIMUM SPEED LIMIT)

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 (Crash Barrier)

Providing and laying hot applied thermoplastic compound 5.00 mm thick including reflectorising glass beads @ 250gms pe sqm area, thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC:35 the finised surface to the level ,uniform and free from streaks and holes.(Repeated bars)

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all concrete as per Clause. 408

S/F of Pavement maker (Cat eye) type Z-ASTMD-4956-04 Avery Dennison/3-M(USA Make) consisting of ASA plastic housing fitted with tightly adherent ploiting compound. The housing shall contain prismatic two glass covered prismatic reflective face to reflect incident light I/C all tax.

Providing and applying tack coat with bitumen using (VG-10) pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.