REPAIR/REPLACEMENT OF JOINERY AND OTHER MISC B/R ITEMS OF WORKS AT MD ACCN BANA SINGH ENCLAVE, 180 ORs MAHIPALPUR, OTM ACCN 35 INF BDE, 18 MADRAS, 18 GRENADIERS , 227 FD WKSP AND 35 INF BDE SIG COY UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

Taking down chowkats or frame with shutters (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down of shutter of any description exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed.

S & F Pressed steel frames of size 105mm x 60mm for doors/cupboard with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S & F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube ,supplying and fixing in opending as per direction of Engr-in-Charge or all as speccified.

M & L for Cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregate as in back filling, holdfasts etc, complete all as specified and directed.

S&F 30 mm thick Factory made 2nd class hardwood plain, flush shutters ,solid core construction, with block board core and plywood face panels, commercial type on both side, Kiln seasoned and chemically pressure treated as specified.

S&F 35 mm thick factory made 2nd class Hard wood glazed and Skelton shutters (any panels) open rebated and prepared to receive wiremesh/glass/gauge etc with all accessory as required and divided into squares edges of framing Plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/gauge etc Size of members of shutters complete as specified

S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing.

Taking down & refixing in same opening of shutter of door , windows etc n exc 1.0 Sqm including easing and also refixing builder hardware as required including renewal of unserviceble screws , welding as required etc. complete all as specified and as directed

Taking down of shutter of door , windows etc n exc 1.50 Sqm complete all as specified and as directed.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle 100mm, hinges 100mm, peg stays, tower bolts 150mm, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

M&L poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

Taking down aluminium windows shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings, rollers and panels, if any required complete all as specified and directed.

Supply fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each) and two aluminium tower bolts of 200mm size for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed. (Note : Icluding Cost of sheet glass Plain/frosted/particle board shall be measured and paid seprately )

S& F roller blind curtain/ Canvas including all aceesories required to make it functional complete all as specified.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repair and including taking down old shutter and refixing in same opening after replacing floor spring complete all as directed.

S&F in repair to door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No-3 complete all as directed.

M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified.

S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 3.5 m complet all as specified.

S&F in repair Steel rolling shutters, 1.25 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

S&F in repair SS curtain rod of 25 mm dia , with fixing brackets, side knobs etc (S S / any pattern) complete all as directed.

Dismantling boarding, any description, fixed in any position with nail or otherwise complete.

M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or by welding to steel frames, including soft wood beading at edges as required , complete all as specified and as directed.

S & F 18/19mm thick Wood plastic composite ( WPC) board solid in cupboard with shelf and shutter full size fitted under or above including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and as directed.

S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw.complete all as specified and as directed.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised , width of flap (when open) is 30mm, complete all as specified .

S&F stainless steel handles, 100 mm long, complete all as specified and as directed.

S&F hasp and staple 125mm of size, safety type, of brass with necessary hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete .

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and directed complete .

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and direct complete

S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long and including Powder coated anodised aluminium snap grid frame size 605 x 605 mm and 2-3 mm thick for false ceiling complete all as specified

S&F acoustic gypsum perforated board 12 mm thick of size 600x600 mm fixed in ceiling or laid/ inserted to Aluminium snap grid complete all as specified and directed .

S & F CP clip on hinges (Inset) for cabinate boxes / board and other places as required including in repair complete all as specified and directed .

S&F U shaped double stainless steel channel of size 10 mmx 20mmx 1.50 mm fixed to wooden frame including suitable rail / rollers etc complete all as specified and directed .

M & L for preparation of new wooden surfaces / previously unpainted of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of perature 1.40mm and fixed with SS wire staples in door/windows and similar work all as specified and directed.

S&F stainless steel butt hinges, ISI marked of size 100 mm complete.

S&F stainless steel 304 grade barrel tower bolt 100mm long, extruded section,etc. complete all as specified and directed.

S&F stainless steel 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and directed.

S&F for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size new complete all as specified and directed.

S&F stainless steel handles, 150 mm long, complete all as specified and directed by engineer-in-charge.

S&F for mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.

S&F Stainless steel of AE SI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

M&L for running welding in repairs including cleaning and preparing surfaces for welding any thickness of metal to be welded such as MS butt hinges to MS frame, broken steel windows or ventilators, iron doors and similar work , finshinh to match with original surface, length to be measured from any one direction complete all as specified and directed.

M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint all as specified.

Hacking out old broken glass n.exc 1.50 Sq.m(any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, all as specified.

S&F, Sheet glass 4 mm thick , ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pan complete all as specified and directed .

S&F 4 mm thick Figured glass , pin headed type in squares not exceedig 0.50 sqm each pane complete all as specified and directed..

S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of perature 1.40mm and fixed with SS wire staples in door/windows and similar work all as specified and directed.

S&F Steel window with side hunge shutters incl projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded with one shop coat of red oxide primer, and two coat of synthetic enamel paint, complete all as specified and directed.

S&F for Steel window or ventilator fixed type with glazing bars.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

Chaudhary Constructions (BID ID -3101577)

M/S Parmod Johar (BID ID -3104112)

ramveer Singh (BID ID -3103498)

P R Constructions (BID ID -3118447)

M/S GOPAL JEE SINGH (BID ID -3119709)