Construction of Auditorium, Bar Hall Library for Court Complex at Poonch

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 mtr in width ) and for shafts , wells, cesspits and the like not exceeding 10sqm on plan, depth upto1.5 mtr including disposal of excavated earth up to 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed with extra additional lead of 25mtrs beyond 1mtr upto 250 mtr in All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. 1:5:10 (1 cement :5 coarse sand :10 graded stone crushed aggregate 40 mm nominal size). including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Reinforced cement concrete work in walls (any thickness) including attached pilasters , buttresses , plinth and string courses , fillets , columns , pillrs , piers , abutments , posts ans atruts etc up to floor five level excluding cost of centring shuttering finishing and reinforcement 1:1:2 (1 cement : 1 coarse sand : 2 graded crushed stone aggregate 20 mm nominal size ). including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete Thermo Mechanical Treated bars. including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Brick work with common burnt clay F.P S ( non modualar) bricks in super structure above plinth level lupto floor V level.of class designation 75 cement mortar 1:6 (1 cement :6 coarse sand). including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering 1:3:6 with ( 1 cement :3coarse sand :6 graded crushed stone aggregate 20 mm nominal size) using 20% stones). including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Centring and shuttering including strutting propping etc. and removal of form for :-

Foundations, footings, bases of columns etc for mass concrete

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Suspended floors, roofs, landings, balconies and access platforms.

Columns,Pillars,Piers,Abutments,Postts and Sturts

Lintels beams,plinth beams,girders,bressumers and centilevers.

Edges of slab and breaks in floors and walls.Above20cms wide

Providing wood work in frames of doors, windows and clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fastners shall be paid for separately). Sal Wood

Providing 40x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolsts, nuts and wooden plugs and embeddings in cement concrete block 30x10 x15cm 1:3:6 mix ( 1 cement :3 coarse sand :6 graed stone aggregate 20 mm nominal size)

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S . pressed Butt hinges bright finished of req size with necessary screws excluding panelling which will be paid for separately.all complete as per direction of Engineer In Charge. First Class Kail - Wood .

Providing and fixing glazed shutters 35 mm thick for doors, windows and clerestory windows using 10kg /sqm ( 4mm thick) floatglass panes including ISI marked M.S pressed butt hinges bright finished butt hinges of req. size with necessary screws. 1st class Kail wood

Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutter for doors,windows and clerstory windows (area of opening for panel inserts excluding portation inside grooves or rebates to be measured ).Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. Marine plywood conforming to IS:710

Providing and fixing wooden moulded beading to door and window frames with iron screws,plugs and priming coat on unexposed surface etc. complete 50x12mm

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc incl. priming coat with approved steel primer all complete Fixed to wooden frames. .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Arm strong accoustical ceiling fine fisuedtegular 240mm grid including all material complete job

6 mm thick cement plaster to ceiling of mix 1:3 (1 cement 3 fine sand) carriages complete job

15 mm thick cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement :6 Coarse sand ) carriages complete job

12 mm thick cement plaster of mix 1:6 ( 1 cement :6 Coarse sand ) carriages complete job

Providing and fixing aluminium handles ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminium tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer.

Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade new work (two or more coats applied @ 3.84 Kg/10 Sqm).

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade including primer . Two or more coats on new work (Wood Work)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade including Primer . Two or more coats on new work (Steel Work)

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate ) finished with a floating coast of neat cement including cement slurry but excluding the cost of nosing of steps etc complete 50 mm thick with 20 mm nominal size stone aggregate crushed

Providing and fixing glass strips in joints of terrazo/cement concrete floor 40mm wide and 6mm thick

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622) of approved make in all colours and shades, laid on 20mm thick 1:4 (1 cement :4 coarse sand), including grouting the joints with white cement and matching pigment etc. complete size of tile 60x60cm

Providing and fixing 1st quality ceramic glazed Floor tiles conforming to IS:13753 of minimum thickness 5 mm of approved make like NITCO , ORIENT ,, SOMANY, KAJARIA or equivlant make in all colours , shades except begundy,bottle green , black of any size as approved by Engineer - in - charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1st quality ceramic glazed Wall tiles conforming to IS:13753 of minimum thickness 5 mm of approved make like NITCO , ORIENT ,, SOMANY, KAJARIA or equivlant make in all colours , shades except begundy,bottle green , black of any size as approved by Engineer - in - charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform,vanity counters windows sills facias and similar locations of required size of approved shade,colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement:4 coarse sand ) with joints treated with white cement mixed with matching pigments,exposy touch ups including rubbing,curing moulding and polishing to edge to give high gloss finish etc. complete at a levels. Raj Granite of any colour and shade (Area of slab upto 0.5 Sqm).18mm thick

Extra for providing edge moulding to 18mm thick marble stone counters,Vanities etc. over item no 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.Granite Work

Supply and filling in plinth with fine sand under floors including , watering , ramming consolidating and dressing complete .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand:10 graded brick aggregate 40 mm nominal size) inretaining wall/return wall,columns etc. excluding cost of centering and shuttering all work upto floor V level .including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Hand packed stone filling including cost of stone including carriages etc complete.including all leads /lifts , carriage , handling and re-handaling ( Complete job)

Providing and fixing aluminium work for doors,windows,ventilators and partations with extruded built up standard tubular sections/appropriate Z.Sections and other sections of approved make conforming to IS:733 and IS :1285,fixed with dash fastener of required dia, and size including necessary filling up of gaps at junctions i.e at top,bottom and sides with required EPDM rubber/neoprene-gasket felt etc.Aluminium sections shall be smooth,rust free,straight,mitred and jointed mechanically wherever required including cleat angle.Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screw,all complete as per architectural drawing and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for seprately.).

Anodised aluminium (anodised tranparent or dyed to required shade accoriding to IS:1868,minimum anodic coating of grade AC 15)

For shutters of doors,windows & ventilators including provinding and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately.) Power coated aluminium (minimum thickness of power coated 50 microns)

Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.50 mm thickness (Weight not less than 10.00 Kg/Sqm)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS:12823 Grade -I type-II) in panelling fixed with C.P brass / Stainless steel screws etc complete as per architectural drawings and dorections of engineer-in-charge Pre-laminated particle board with decorative lamination on both side

Structure Staircsae Glazing complete Job

Providing and fixing aluminium tubular handle bar 32 mm outer dia , 3.0 mm thick & 2100 mm long with SS screw etc . Complete as per direction of Engineer-in-charge Polyester power coated minimum thickness 50 micron aluminium tubular handle bar

FAROOQ HUSSAIN

GHULAM NABI MIR

Ms Abdul Aziz Mir

Manohar Singh Sasan