CA NO. GE AF NO.1/GUR-32/2023-24 REPAIR TO FLOOR , SANITORY FITTINGS , INTERNAL WATER SUPPLY PLINTH PROTECTION AND OTHER ALLIED WORKS IN AREA AT AF STN PALAM UNDER GE (AF) GURGAON NO. 1.

Amount

Dismantling of Stone slabs and tiles of any description or thickness in floor or wall, aprons and laid badded and pointed in any mortar. etc complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 Type B-0 (12.5mm Graded Stone Aggregate) as in sub floor etc., including rough top surface to receive floor finish complete all as specified and as directed.

M&L for 7 to 8mm thick Non–Skid Ceramic Coloured Tiles, size 300x300 or 400X400mm in size, Laid on Floor,over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in White cement with pigment to match the shade of the Tiles, complete all as specified and as directed.

M&L for 7 to 8mm thick Glazed Ceramic Coloured Digital Tiles of Size, 300X450mm set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in CM 1:3 set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of the Tiles, complete all as specified and as directed.

S & F for 10mm thick Vitrified light shade Coloured tiles, square / rectangular double polished, area of each tile n.exc. 0.36 sqm, in floor including 15mm thick screed bed in CM 1:4 etc.,set and jointed in neat cement slurry and pointed in white with pigment to match for laying floor finishes all as specified and as directed .

M&L for 8 to 10 mm thick ceramic joint free Coloured Tiles, of size 600x100/150mm, on vertical surface/Skirting over and including 10mm thick rencering in CM 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in white cement with pigment to match the shade of the Tiles, complete all as specified and as directed.

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures)

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.

M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed by Engr-in-charge

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand mixed with Liquid WPC) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 6mm t0 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Aluminium Channel, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as specified and directed by Engineer-in-charge.

M&L for preparation of newely plastered ceiling surface and applying three coats of white wash complete and all as specified and as directed

M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered surface complete all as specified and as directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding upto 4th floor.

M&L for applying two coat of Distemper oil emulsion by Auto Roller over a coat of primer over 2 to 3 mm thick birla putty punning including finishing by Sanding Machine and Auto Roller new surface complete all as specified or as directed by Engineer-in-charge. Make: Asian Paint (Tractor)/Berger paints (Bison super)

M & L for PCC 1:2:4 Type B1 (using 20mm Graded stone aggregate) as in for fixing posts, bed plates, anchor blocks, corbels, brackets, including necessary form work etc. complete all as specified and as directed. mortar complete with joints to match

M&L fore Mild steel angle iron as in brakets/fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh and wire any type) including all necessary drilling, bolting or riveting and embedding in concrete and Fe-290 Gde E-165 complete all as specified and as directed.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks including dismantling of existing sheet in any position complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge.

Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate)as in plinth protection and courtyard, finished even and smooth/fair with out using extra cement complete all as specified

M&L in repair for 25mm thick Chequered Cement Concrete Tiles 30cmx30Cm pre printed coloured , Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including 15mm thick Screed Bed in CM (1:4) as in Path, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching, levelling course, bed block for flooring, rungs, window cills etc complete all as specified and directed by Engr-in-charge

S&F for 20mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling,laid in floor etc incl all fittings with solvant anf brass threaded fittings for fixing taps etc including Taking down unserviceable 15mm Steel Water Tubing with Fittings and Connections, including wtar tighteness test etc., complete all as specified and as directed.

S&F for 25mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including Taking down unserviceable Steel Water Tubing with Fittings and Connections, etc., including water tightness test complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors or any other Situ-ation including Taking up down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors or any other Situ-ation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Angle Stop Cock 15mm Bore (dia), Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed. Make :- Cera, Johnsen, jaguar, Marc.

S&F Vitreous China Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed. Make :- Cera, Johnsen, jaguar,

S&F Brass CP Towel Rail 600mm Long, as Approved, fixed including Taking down unservice-able Towel Rail of any description, complete as all specified and directed. Make :- Cera, Johnsen, jaugar.

S&F Brass CP fancy Bib Cock 15mm Bore (dia), Chromium Plated Long Body, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed. Make :- Cera, Johnsen, jaugar,

S&F 2 in one Bib Taps 15mm Bore, Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.

Vitreous China Squatting Pan ‘ORISSA’ Pattern, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime Concrete Bedding including taking out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S&F for high pressure PVC connection pipe 15mm dia with Brass CP Check nut and rubber washer complete with 600 mm length complete all as specified and as directed by Engr-in-Charge.

S&F in repair Chromium plated shower roses with Stainless Steel extension rod withswivel joints, any size,including fixing to steel pipe or union complete all as specified and as directed by Engr-in-Charge.

Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortar up to 100 mm dia and removing to store.

S&F PVC (SWR) Pipes 75mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls or Laid in Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) Tee with access door suitable for PVC (SWR) Pipes 75mm in Bore (dia), jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Bend suitable for PVC (SWR) Pipes 75mm in Bore (dia) with access door, jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed.

S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls with oval access door complete all as specified and as directed.

S&F in repair 75mm dia CI bends with oval access door, diminishing pieces or tapers complete all as specified and as directed.

S&F in repair 100mm dia CI bends, diminishing pieces or tapers complete all as specified and as directed.

S&F in repair 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and as directed.

S&F in repair 100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and as directed.

M&L for replacement of 75mm outlet CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge

S&F in repair stack clamp made out of GI angle and 10mm dia U bolt and nut with washer for 75 and 100 mm dia pipe complete all as specified and as directed.

S&F in repair 500 ltrs rotational moulded polyethylene three layered water with EPI coated storage tanks (cylindrical vertical with closed top) hoisted and fixed with all necessary fittings in position including taking down existing water tank of 250 to 500 ltrs or removing of existing RCC old tank complete all as specified and directed by Engr-in-charge .

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore complete all as specified and directed by Engineer in charge.

S&F in repairs, 20 mm Bore gun metal Gate/Globe half turn valves with iron wheel/Lever fixed-in-repairs complete all as specified and directed by Engineer in charge.

S&F Stainless Steel Kitchen Sink with Drainage Board of Overall Size 915X460mm and Bowl Size 410X330X160mm, made of Stainless Steel 1.0mm thick Sheet with Plugs, Chromium Plated Waste Coupling and Washer including Bedding in Cement Mortar 1:4 to Dwarf Wall or fixing Cantilever Brackets and Connection to Pipe including Taking down unserviceable Sink and Connected Items complete all as specified and as directed by Engr-in-Charge.

S&F in repair,Stainless steel Plate rack of size 24"x36"x10"(all dimensions in inches) complete all as specified and directed by Engr in charge Cat Part No-KR-572 of Make-Shakti or equivalent out of makes specified in list of makes.

S&F in repair Sheet Glass,4.0mm thick Ordinary, Glazing as in Window Frames fixed with Wooden oil putty/rubber beads, not exc. 0.50 Sqm in Each Pane and fixed in repairs, complete all as specified and as directed.

S&Fin repair stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, fixing and repair etc, complete all as specified and as directed.

M&L for preparing old plastered surface of walls and applying two coats distemper oil emulsion over a coat of primer complete all as specified(Note:Apply for 3 mm thick birla putty for surface by auto rollar)

Removal of debris/malwa to a distance exc 10Km but n exc 15 Km and depositing out side the MD land and as directed by Engr-in-charge.

Note :- The amount of Rs 17805/- against Schedule of Credit on Srl Page 139 shall be deducted from the total amount quoted against Sch 'A'

kailash chawla

M/S RK Builders

SM CONSTRUCTION COMPANY

M/S Parshant Associates